Ford 6.0L Power Stroke Diesel :: 2003 - Sputters When Going Uphill?
Mar 27, 2015
I am the original owner of a 2003 F250 Super Duty 6.0L. I have had all the required work that has ever needed to be done to it, including replacing the entire wiring harness and some work on the turbo this last September. Over the last few weeks I have noticed it sputtering when going between 45-55MPH up a hill. It only does this when I'm going at a steady speed. It starts fine and accelerates fine, but if I'm going a steady speed up a hill 45-55MPH I notice the sputtering. I've had almost all my work done by the dealership and just had it in last week for this, but they have told me there is nothing wrong, but knowing my truck, I know there is. What could be causing this? There are no check engine lights on or anything.
View 14 Replies
Advertisement
i have an 03 F350 6.0 turbo diesel. Problem im having is a boost problem. on the passenger side, the intake tube keeps popping off the turbo. The Boot ripped on me on a hill so i replaced it with one from the junkyard seeing that it costs so much new. Anywho when i changed the intake tube i did clean it with brake cleaner to clean it and wipe it off. After i did i went for a ride and it just popped off at about 2500 rpm. So i went back thinking maybe i had too many bruskies and recleaned and tightened the clamps on the boot again. Get going down the road going normal again. I gave it a heavy foot to about 3200 and let off it made a sound like fluttering then as soon as i hit it again it blew off. looked at some other forums that said to put hairspray on the boot to seal it. haven't drove it yet just looking for other peoples solutions.
View 8 Replies
My mother has a 2003 Ford Taurus. I really hate this car, but she wants it fixed. It sputters in drive when your taking off and it barely goes up hills. There is no sputter in idle or park. I put on new fuel filter and spark plugs on it and cleaned the idle air control. What should I try next?
View 19 Replies
So I am relatively new to diesel engines! I have a f250 6.0L, that every now and again sputters and idles rough, when the ac is off? Yes I did say off. It's only done this twice, but when I turn the ac on it goes away and runs fantastic. Not sure what could cause this, and think it's a little weird that it's not consistent. Sometimes I run it without ac and it's fine, but this has happened twice now, so I thought it might be worth figuring out.
View 2 Replies
I've had a 2007 Coachman Freelander class C RV with E-450 for about 8 months now. We have been on 7 camping trips to the same location this summer, and the engine has sputtered in exactly the same place on 6 of these trips. It's pretty freaky, like the road has bad mojo there.
We have to come down a steep incline for about 2 miles, dropping about 500' vertical at about 6500' elevation. Then we drive for 2 miles on the flat before hitting a big mountain climb up to 7500'. About 30 seconds into the climb, the engine will sputter, and kick out smoke from the tailpipe. The first time I pulled over, and it idled fine. I took off and climbed the hill just fine. Now I just drive through the sputter, and it goes away after a minute.
So what's happening? Is the fuel tank sloshing crud around? I never get a water-in-fuel alarm, although the E450 doesn't have much of a message center. It doesn't happen on other sections of mountain road. This rig has about 38,000 miles, and is bone stock. I put new oil and fuel filters in before the summer. This rig is the same size as my old '82 RV E350 w/ 460, and boy is the 6.0L an improvement!
View 14 Replies
I have a'04 f-250 6.0L diesel truck. There are times when i come to a stop that my truck sputters like if it's about to run out of fuel or want to shut off but the tank is full or half. If i am going at a fast pace and then begin to slow down and stop it will sputter.
View 3 Replies
I bought 08 6.4 113000 on it 4x4 lariet drove 300 miles home. No problem 2 days later runs fine for 45 minutes than loses power and sputters up hills starts no problem every morning every time wait awhile sometimes runs fine was on e when test drove canged both fuel filters oil and drained 8 quarts tranny fluid and replaced it. When problematic rpms wont go over 2 turbo psi seems high seems in sync with rpms dropped...
View 3 Replies
What is a "normal" number people see on their load factor? Mine was around 25-30 a few weeks ago but I noticed it is increasing to around 30-40 once I'm in gear, in park it's fine. My acceleration is also getting a bit sluggish too especially going up hills and my throttle isn't responding all the way, my turbo boost is normal though and I don't think there is any VGT stiction. I'm thinking either a fuel filter or a MAF sensor to start with. Fuel filters have been in exactly 10 months. Can a dirty fuel filter, air filter, or MAF sensor affect engine load at idle and how fast it accelerates? I feel like I'm pulling a trailer and with it being more sluggish, my transmission is shifting harder as well.
View 14 Replies
I have a 2011 F 350 super duty 6.7 diesel. Occasionally while driving I am getting a cackle from the engine and it sputters and sounds like and feels like it's going to stall out. There is no power. It only happens occasionally. It happens mostly when Im driving, not accelerating from a stop. Example would be driving along for a while then try to accelerate off a ramp on to interstate. I brought it in and of course the excuse is we can't get it to replicate what I discribed. They did adjust something in the transmission shifting pattern. I get irritated when I paid for a loaded f350 diesel lariat and it has issues like this.
View 8 Replies
I have a 2006 F550 mini bus, that I just had the head studs done, egr delete and air intake changed. Last night we took it out for a run to test it since we just installed a new fan clutch. We can here the fan kicking on and off. The problem is, we drove it say 60 miles, up and down a mountain, had no issues. We got out and ate for about an hour, and then drove it back the same way. This time on a slight upgrade my check gauges came on, and I seen the temp rising. I let off the fuel, and it dropped back down. So the rest of the way home I was easy on the fuel and made it back with out heating up again.
Today, we took it for a ride and at idle before we left the ECT was 172, and EOT 170, as we drove I watched the temps. Climbing up a fairly steep mountain, we were doing about 65mph, for about a 5 mile climb. During the climb my ECT was 201 and EOT 226, at the hottest point it was ECT 204 and the EOT was 226.
I am assuming it could be a possible water pump and or oil cooler. Reason I am thinking the water pump, is because after it over heated, I noticed if I let off the fuel quick after running I would hear a noise like a puffing sound. It was the coolant shooting out of the degas bottle. It did this several times when letting off the fuel quick, which I think was the pump was allowing the coolant to be pushed back in from the heat.
I already ordered a new pump, which if bad could also cause the oil not to cool as the pump is not pushing enough coolant? (Also I only lose coolant if it gets to hot)...
View 7 Replies
Starts good cold and hot. Taking off like a grandpa on an evening drive don't notice a thing. Only codes that keep coming up are 2614 and 2617 which are cmp and ckp open curcuit codes and a software incompatibility code for FICM which is due to the updated software in the fresh FICM I installed. HPO pressures are good, has boost, idles smooth, revs nice when in park. New injectors (cause it was running rough especially cold before) and CMP and CKP (because of the above codes and didn't change)and ICP and IPR (last 2 installed because of HPO codes that are gone now with the IPR and ICP). Fuel pressure is 65psi (updated spring). When you step on it while driving it sputters and bucks like it's out of fuel, let off the throttle a bit and it purrs like a kitten. I'm a little stumped. I think it puffs a little white/blue smoke while it bucks.. not much tho. and it comes in little puffs. Took off filler cap and there is almost no blow by.
View 6 Replies
I have a 2006 F250 with an International 6.0 turbo diesel. Last Friday I was driving 70mph up hill when my truck slowed down (I wasn't hauling anything) and then stalled, I got it restarted my doing a moving restart. After that it stayed in limp mode and wouldn't go up into 4th gear it just would jump from 1st to 2nd them to 3rd if I was coasting and it would only let me go 40mph at the most, so I got a tester and tested it and the only code it gave me was glow plug 1 & 5 were misfiring so I replaced those.
After I decided to do a test drive I went 800 meters and my tuck still didn't go out of gear one and I couldn't get my truck to go more than 5mph, then it stalled, so after about 30 minutes and 2 other guys tinkering with everything, we got her started and she sounded perfect, so I took off again, same thing happened except I got her going 20 mph but her RPMS stayed under 2,000 and then it decided to sputter and then stalled.
When I went to restart her the ABS, TBC and the transmission light went off, now she won't crank over and she was clicking (starter or dead battery) and now the lights don't go off, the Windows don't work and their is no electricity flowing...... I understand the electricity, she has 2 batteries. (The first one starts i.e. Glow plugs, starter etc, the other just supplies juice to the system, I.E. Lights, fuel pump.. Etc) what is causing this?
View 6 Replies
Long story short, when going up hill or any incline for the matter it feels like it's struggling and lugging, blowing carbon everywhere. It's an automatic so I yeah can downshift sometimes but even turning overdrive off doesn't work in a lot situations. My EGTs are way too high and I'm not about to tow my project car to OKC unless I get this figured out. I live around Salt Lake City so towing can be hard up surrounding passes. Just cruising to park city at 70mph on I80 up a pretty good incline my EGTs were 1,000. Just driving around the city, some hills I see 700-800 when I'm going 35mph.
At stop lights I'm seeing 400 at idle. My probe on the pyro is going bad starting to flutter but even if I fix that I'm still having issues up hills. Boost is good, up-pipes don't appear to be leaking but fuel pressure is a little low @56 and I know it's not the fpr because I just messed with that yesterday, put a new poppet and oring in, I haven't checked the fuel pump yet or dropped the tank either. If it is in fact fuel pressure related, does it make sense for me to see smoke coming out, wouldn't that indicate too much fuel? I'm lost, it's driving unloaded like I'm pulling an anchor.
Regardless of which spring I put in the frx I get 56psi, even with the black one I may see 58psi but even with 58psi it was still lugging it's butt off up hills and making that terrible drone sound like F you down shift me now.
View 14 Replies
I have a late model 2004 F-350 6.0 powerstroke. 182K miles. Auto Transmission
What happened. Condensed version
Left house, drove out to highway, got on highway. Everything feels normal.
About 1 mile of going 70mph, I notice I can no longer accelerate. after 1/2 mile, I begin loosing speed, and engine will not rev past 1000 rpm. I eventually pull over (another mile), put in neutral and will not rev past 1000. put in drive and start to idle to highway exit. it gets about another .5 mile and begin going up a hill when it completely dies. Will not restart.
No prior issues with the truck. Full tank of fuel.
What I have tested so far. Ficm 48.5 volts cranking. Icp .225V KOEO, .875V Cranking. LPOP is registering pressure on the dash. No Fault codes.
I have gotten it to start twice now, one time it allowed me to rev to 750 rpm, where i used 4 low to make it onto a trailer. second time would not rev at all. idling at 250-300 rpm.
That same night as it died, I drained the transmission pan/ TP filter and filled with 8.5 Quarts of Mercon LV. This is the first time I have done this since purchasing @ 161K miles. Everything seemed normal, no leaks present.
Also my buddy showed me how to enter the dash test mode and we cycled through these. Not sure if this is relevant.
So, What do I test next? I don't think its HPOP issue since the ICP is reading .875 volts at crank. I did unplug the ICP and it still would not start. I don't think its the injector side of the ficm because they buzz as normal with koeo, but this is a possibility as I don't have equipment to test. Egr valve is clean for age of truck.
Would it be possible that the Mercon LV knocked crud loose in the transmission causing it to fail/seize? would siezed tranny cause the engine to behave in this manner?
Fuel bowl on top of the engine was full of fuel. I have not pressure tested it yet as I can hear the pump running during key on.
could i have a bad crank or cam sensor?
Multi-injector failure?
Bad Icp with HPO failure?
View 14 Replies
Towing a 5th wheel at about 10,000 lbs total. Towards the end of out 9 hour trip home and going upgrade the truck begins to loos power and the engine starts making some bad sounds. Although its hard to hear it starts about 45 seconds in and continues later when going uphill. the truck also made a very high pitched squealing/scraping sound (not a belt) like it may have been coming from the turbo. Oil temp was about 220, trans temp at 170 at the time of the event.
Truck has 216k, stock, upgraded trans cooler, original fuel pump.
Here is the video : YouTube.....
View 12 Replies
2001 F350 7.3 ... Below 35 degrees, truck is hard to start. Cranks for a while, sputters, dies. Repeat a couple times, finally starts running rough, surging and loping for 10-15 seconds before it settles down and runs smoothly. Recently had all glow plugs replaced. Next cold start didn't show much improvement (not as bad as sometimes, but wasn't very cold either).
Surfing here and other forums, I see suggestions about letting glow plugs heat longer after WTS light goes out. Some suggest as long as 60 seconds. In the past, I have tried waiting a little while longer after light goes out, or turning key off/on and letting it cycle again. But I've never really timed how long I was waiting.
We're having a warm spell right now, so I can't do much testing. But yesterday morning was about 30. I timed the WTS light and it went out after 10 seconds. I waited another 20 seconds.. about 30 seconds total. Starting seemed a little better than usual, and there was about 1 second of roughness before it settled down.
I need to do more cold weather testing to be sure, but it does seem like it might be better to wait longer than I have been.
On the other end of the scale, I saw a comment that glow plug cycle is dependent on oil temp, and they don't come on at all if oil temp is above 40. Is this correct? If so, is there any good reason to wait to start in warm weather? I'm usually pretty diligent about waiting for the light regardless of weather, but the truck doesn't seem to object if I get impatient and start it sooner in warm weather. If the glow plugs aren't even on, why wait?
Should I just totally ignore the light, and wait for some interval (or not at all) based on a semi-educated guess about how much glow plug time might be necessary for the current temp?
View 14 Replies
I was towing my camper uphill and my 03 6.0 started missing and blowing black kid smoke. Next thing I know I hear a loud pop and steam is coming from under the hood and the truck dies. I pull over and discover the degas lid is stuck on and the bottle came apart at the the seam and the truck will not start. 6.0 with 120k miles
View 1 Replies
I have a 2000 7.3 and I have a hypertech Max Energy Programmer set to stage 3 in my truck right now (100 HP). I noticed last night when I was going up hill and had my foot to the floor the truck would hesitate for a minute and then lag before it was would catch up to itself. I did it again on some flat ground and noticed when it did do that my boost gauge would get to 20 and then fall to Zero. If I start out and gradually get to the floor without punching it the truck drive fine. How to fix it?
View 2 Replies
I have posted a pic of a smoke issue I am having while pulling.
I just pulled a 10,000 lb trailer up a few 7% grades at 8-10,000 ft and the best I could do was 40-45 mph at 6mpg. Every hill would set a P1211 and when the truck downshifted to 3rd the smoke would go away for the most part.
Truck is 100% stock and pulls the same as my F350 with 3.73 gears but smokes a lot more.
The smoke is kind of annoying and performance seems sluggish especially given the 4.88 gearing. Where to start?
Has new ipr, hpop, icp, fuel filter, air filter, fresh 5w40 mobil 1.
View 14 Replies
I have always seen other trucks blow black smoke with towing up a hill but mine for the most part has not. I pulled my 5er to CO this summer and notice my truck starting to blow black smoke. I consider myself a very conservative driver. I always stay around 65 MPH while towing and never push my truck up the hills. I always try to keep the RPM around 2000 and let the MPH fall where they may until I reach the summit. With the black smoke I'm starting to see what is my truck trying to tell me? It's not bad but would like to fix now before it becomes something more.
2001 F250, 4X4 crew cab, 7.3 with 205,000 miles.....
View 10 Replies
Lately I have been having problems loosing power. Truck wants to miss mostly going up hill and runs sluggish I'll pull off the road and let it idle for a minute and it will run fine. And it is only occasionally some days it don't happen at all and other days it happens quit often. New fuel filter, oil is good, had it on the scanner and isn't throwing any codes. Around 230k miles newer injectors.
View 10 Replies
