I have a 03 explorer with rear a/c and heater that has a clunking noise when the key is in the on position. The noise seems to be coming from the rear heater core or the rear a/c evaporator. I thought it was the rear blower motor, but noise is still there even when blower motor is disconnected.
View 1 RepliesMy wife's 2003 sportrac has developed a problem. The left rear turn signal brake light will not work. The tail light does. When you turn on the left turn signal the front bulb and the dash light flashes real fast. I have changed both, the front and rear bulbs with no luck. I've read on here about the tilt steering column deal. I have moved the steering column while operating the turn signal with no change.
View 4 RepliesI own an '03 F250 and have had it since new. I love the truck, keep it in good condition, and plan on keeping it for at least a few more years. For some time now I've had the classic small spots on one rear fender well. The spots are getting a little bigger and look like they're going to come through soon. I'm not a big fan of fender flares, but from what I understand, that's the easiest way to fix the problem, cut the rust out/seal it, install fender flares. Is there any other way to fix the rust without repainting the whole bed? I don't like fender flares because I think they look a little weird with stock tires and also because it's only one fender that is rusting, but I'd have to install them on all four. If fender flares are the only way to go, any that are small and low profile?
View 14 RepliesProblem on early 2001 Sport Trac 4X4. I don't have the whining but a clunk when I go over bumps. I jacked up the left side and I can pull the rear wheel in and out maybe a 1/32 and I hear the clunk so I'm sure the loose rear end is the problem. How do I go about fixing it? New/used rear end? Mine is a 2001 (drum rear brakes)...
View 3 RepliesI've got a 97 explorer xlt 5speed.... When you start the truck and start driving... its making a Loud clunking noise from under the car... at first we thought it was the gear box but then after replacing with a reconditioned gearbox and transfer case it was still there... it is doing this in auto mode and in 4x4 mode... during city driving it does it all the time .... but when you drive it to 100km/h the clunking completely stops.... and then you can bring the car to a complete halt (without turning the engine off) and start driving again and the clunking is still gone... BUT as soon as you turn the engine off and on again (even if only for a minute) the clunking returns again until you drive to 100km/h and then it stops again.
View 2 RepliesI'm getting this weird sound when i turn on my car and turn the steering wheel left and right not even a full lock just left and right really quickly or slow there is this annoying clunking coming form both of the front wheels atleast thats what i think it is and it feels as something is loose but i checked most of the bolts.. Recently i changed my front wheel bearings inner cv and outer cv joints on both front wheels.. i changed my ball joints and tie rods everything was change within a 4-5months..
Also the other day as i was driving and i could only hear this 20mph and up this weird clunking and vibration in the floor.. no vibration in the steering wheel just the floor and clunking sound.. i know for a fact i need an alignment and possibly new tires.. but what would the clunking be coming form when driving or just parked in place while moving the steering wheel...
I need to replace the rubber axle bumper guards. I have a clunking noise from the left front going over bumps. Troubleshooting I found the left front axle bumper guard is missing, right side is missing chunks and dry rotted. I had a question about how they attach. The one that is missing looks like a rusted bolt snapped off. Is it safe to assume a bolt goes right thru the center of the bumper guard into the frame? Couldn't tell on the right side it is in bad shape. Right front bolt may have sheared off on the bottom and just held in on the top by what is left.
View 5 RepliesMy left rear turn signal is out, the front works but blinks rapidly. The right sides work normal no rapid blink. New bulbs on left side did not fix problem. Could this be a flasher issue or is this an open circuit. Don't even know where to begin testing wires if this is the case.
View 4 RepliesI just replaced my rotors, and tie rod ends on both sides. Now I have a clunking noise when I turn left. I also have erratic steering, the car swerves when I take a slight left, and I have to turn further to the right to get it to swerve back straight. If I hit a bump, car swerves left. Is this an alignment issue? I haven't taken it to get aligned yet, everywhere around here is closed. Could it be the Axle?
View 3 RepliesHaving issues with Gen3 Prius steering column? I suddenly developed this clunking noise when I rock my steering wheel from left to right. It's steering correctly but I've never heard this noise before....
View 7 RepliesI have a 2004 2WD supercab. And am hearing a 'clunking' sound when I turn almost full-lock. Below is a summary of what I have experienced so far:
- My truck used to be lowered 2" (below stock) at the front since new. Last month I lifted it (front and rear) and it now sits 2" above stock on new rancho shocks.
- I installed a camber kit and had the front aligned (toe and camber) after the above suspension work.
- The truck drove beautifully for two weeks until one day a 'clunking' sound was heard from the front-left every time I turned left. The alignment also changed as I had to now hold the steering very slightly to the left to drive straight.
- The alignment shop re-did the toe tracking (the camber did not change) and the truck drove great for about a day. Now I can hear the same clunking sound when I turn right and the tracking is again screwed up meaning I need to hold the steering very slightly to the right to drive straight.
What parts are playing up and what may need replacing?
If I'm stopped and turn the wheel for a hard left turn I hear a clunking noise and the check engine light comes on, will be taking in to the dealer on Mon.
View 2 RepliesI am having a problem with my 2007 R32 manual,over the last few weeks its developed a whining noise in what seems to sound from the rear left side,more so when driving around a left hand corner (weight is off the noisy side),or when i let my foot off the gas and let the car run,ive jacked it up and when I grab the back left drive shaft and shake it, I found there's a bit of play on the side going into the diff, there's 70000 miles on it and no problems to date, looking for some info on what problem could be?
View 6 RepliesHave a 2010 Corolla, 42k miles, from a dead stop, turn left under power with wheel about 90% of one full turn, get a clunking popping clicking noise from the front end -- I cannot tell if from the left or right side -- I've been in the back seat too, and cannot determine if the noise is coming from the left or right side up front. I've had the car since 34k miles, has been making this sound ever since, not sure if its gotten worse, if it has, maybe just a little.
No noise if turning while NOT under power (coasting). No noise if turning to the right. No noise while driving in a straight line or veering left at a higher speed. Also, I tried to recreate this noise from a dead stop, turning going in reverse, both left and right, and no noise ever.
If in a parking lot, from a dead start, turn wheel left almost one full turn, accelerating slowly I can get the car to make this sound continuously (until I start going too fast beyond my comfort zone).
Have looked under car jacked up several times, nothing obvious. CV axles have minimal play and the boots are in great shape. Suspension parts appear ok.
My gut tells me could be a CV axle, but not certain, and I don't know which side..... something else that could cause this ?
The car is a 2.8L w/ a manual tranny. The car was making a rhythmic clunking and clicking noise around right hand turns on the left wheel. So when the weight of the vehicle is applied to the left, that's when the noise occurs. The car has been in the shop for 6 days and the technicians have replaced both axle shafts (it was time to do so anyway) but the noise is still there!!! What could possibly be making that noise other than bad CV's? The rhythm of the noise coincides with the rotation of the wheel/shaft which is where they have focused. Could it possibly be bad strut mounts? This is driving me crazy!!! They tell me its perfectly safe to drive (how do they know this when thy don't know whats wrong?) but I can't imagine this can carry on much longer without something breaking.
View 2 RepliesFor the last few weeks, when I make a turn (particularly a sharp turn in either direction) I get a "clunking" noise that sounds like it is coming from the front end somewhere. I can also feel it - almost like a gear slipping and engaging again. I am not in 4WD mode when this is happening. It NEVER happens unless I am turning a corner. If I drive straight, it's fine. 1999 Explorer XLT (4 door, 4wd model)....
View 2 RepliesAlright so a friend of mine has a Ford Explore with the little switch on the dash for auto 4 wheel, high 4 wheel, and low 4 wheel. When it is in Auto it has no issues drives fine and good. As soon as you turn it to 4 wheels high and start to go all you get is a loud clunking noise constantly. Another friend had a similair issue with an AWD explorer that we just pulled the front drive shaft and it seemed to solve the issue. How would I test the driveshaft to see if that's the issue.
View 2 RepliesI've had a rattling/clunking sound from my front left wheel recently so I jacked up that corner. As soon as the tire elevated off the ground the bottom fell inward. I could easily push the top of the tire inward and pull the bottom of the tire outward. Does this lead to a bad hub or bad ball joint(s)?
View 10 Replies2010 Explorer XLT. The left rear power window lowers, but does not raise back up with the driver's master control switch (the 4 switch control on the driver's door). It does, however, lower and raise fine with the single switch on it's own rear door. Thinking it was a bad master switch module on the driver's door, I replaced it and the same thing still happens - works fine with it's own single switch but will only lower and not raise with the driver's door switch. All the other windows work fine. This has me totally stumped.
View 11 RepliesI can usually track these down, but this one is eluding me. It seems to be coming from the rear passenger side and really only bad when turning left or veering left at slow speeds.
View 11 RepliesI've got a 2000 Accord. I recently started hearing and feeling a hard knocking/clunking noise at the front-center of the car during the correct after a left turn. My trustworthy mechanic told me the subframe is rusted out on the right side and that it isn't safe to drive until the subframe is replaced (he also said he's seen several of these this last year). He suggested that the cause is that the hose leading away or down from the air conditioner is too short, and leaks directly onto the subframe. There is no recall on this problem currently. I've done some Internet research and there is some buzz about this, but not as much as I was hoping for.
View 17 Replies