Elantra XD (2001-06) :: Brake Pedal Stiff After Starting Up
Aug 31, 2015
Very recently the brake pedal in my car has been stiff (won't depress all of the way down) after starting up the car when it's been sitting for a while. It takes a few presses of pedal for it to feel normal again.
I did some research and turned up a vacuum leak as a possible cause. I also wondered if a flush/bleed would be a possible fix for something like this.
View 1 Replies
Advertisement
I have the limited with the push start. In order to start the car, you have to push the brake in so far and then push the push button. Lately the brake pedal is really hard to push down after its been sitting for an extended period. Once its started, all is fine. Its almost like I've pumped it a few times first, but its not the case.
View 11 Replies
My girlfriend now encountered a brake problem twice: In those situations she needed to brake but the pedal was really stiff, did hardly move and the car did not brake. Only long hard pushing finally succeeded. The second time she nearly got into an accident because of this so we took the car to the dealer then who found nothing and said the brakes are ok. I drove the car the first 5k miles and never had such a problem.
View 20 Replies
What would cause the brakes on my wife's truck to be stiff and not hold?
View 14 Replies
Got Elantra GT 6 month ago. Good car, but it seems I have a very common problem of Elantras - lost of brakes. My car has TCS, but no ABS. It started 4 month ago. Car is fine for several weeks, but then within two days brake pedal getting from bad to worse. My mechanic already replaced master cylinder and right rear caliper. Did not work. Yesterday it was third time when I almost (very soft pedal) lost brakes. Today in Hyundai dealer service they bled the brakes and said "that they hope it will work". Their mechanic found air in both (left and right) rear brake lines. So, my question if I have a leak in, say, left line will it propagate to the right line? I am asking because I do not know the hydraulic schema of the brakes and want to collect as much info as possible.
View 17 Replies
I have been working on my 01 Elantra for 2 days now. My problem is that I have absolutely no brake pedal at all, it just goes right to the floor. and this is only when the car is running, when it is off I give it a quick pump and i have a nice firm pedal. I installed a new master cylinder, bench bled it and all that jazz. I replaced the rear brakes and a wheel cylinder, I have also bled the brakes multiple times, and mutliple ways. bled the master while on the car and all the brakes while the car is off and while it is running. I dont know what else could be wrong with this. I looked at all the lines and there are no wet spots, no hoses are swelling up. everything looks top notch...i just have no brakes why.
View 15 Replies
I have an issue when I go to start the car after it sits for as little as 30 min.The brake pedal is stiff and its hard to start since you have to depress the brake pedal prior to starting the car .
View 3 Replies
This problem just started the other day. I park in a very slightly inclined garage and now when I get into my car in the morning, the brake pedal is so stiff the brakes barely engage and the car will actually roll until the engine turns over. All other braking behavior is completely normal while driving and it only occurs if the car has been sitting overnight. Doesn't seem to happen if it just sits for a few hours.
View 19 Replies
Have a 13 Sonata Limited 2.0t and for some reason it won't start.
Also brake pedal is extremely stiff. Tried to push start button several times while pressing brake, and dash lights just blink several times.
View 9 Replies
I've been having a randomly recurring problem with my 2004 Hyundai Elantra for several months now. I'll be driving along and will notice that my brake pedal won't depress. When I step off of the accelerator, it is like the brakes are already engaged. Eventually, the brake pedal won't depress at all and the car acts like the brakes are fully engaged. Sometimes I can let it sit for an hour or several hours and the brakes will readjust and I can move again. So far I have replaced both calipers, rotors, 2 brake hoses and the master cylinder, but I am still having this problem. My mechanic is flummoxed. Any time I have the car towed in, the brakes release by the time it arrives and he has no problem to observe.
View 3 Replies
3300 miles in, and my brake pedal is extremely hard/stiff when I attempt to start the car. I don't have issues getting it to turn on, but it literally moves maybe 1/4 inch at most. It just randomly started doing this.
View 10 Replies
I have an issue that i have been trying to resolve. When i depress the brake lightly to a stop, the pedal pulsates. But if I depress a little harder it pulsates initially midway down and then it stops as i press harder to brake. (I hope this is easy to understand). so... press lightly, pulsates until I reach a stop. press firmly, pulsates briefly, then no pulsation until i reach a stop.
I have pretty much replaced everything. Calipers, rotors, pads, lnes, fluid, hardware. lugs are torqued to 100ftlbs.
Also the caliper is not sticking the problem persists even after I replaced the calipers. I am left at a total loss here. I cant think of anything else. One thing that i noticed is, the LUGS are really hot to the touch after driving it for 15 min or so.
View 8 Replies
Have an 07 gs350 awd and lately the pedal feels stiff and doesn't depress all the way down at startup. Sometimes the steering wheel will go back up as if I have just stopped the car and occasionally I will get the message on the dashboard that I need to press the brake pedal at startup even though I am doing that. Dealership claims they can't duplicate problem and don't know what it could be.
View 3 Replies
This happens to me again on a very hot day. The symptom is: all of sudden, the brake pedal becomes stiff. I mean I can only depress down the pedal just a little bit. Then when I want to accelerate, the engine works very hard and speed picks up very slowly. RPM will shoot to 3000. When I remove my foot from the gas pedal, the speed drops very fast. The car slows down much sooner than usual. So my feeling is the brake is dragging the car. The dealer cannot duplicate the problem during short test drive. So what can be wrong? The brake booster was replaced a few months ago. Is it possible it provides too much boost?
View 17 Replies
I own a 2015 camry SE - 4k miles on it. Right from the second month I felt like the brake was stiffer and I always felt like I am going to rear end the vehicle in the front. Last one month it became really worst. The pedal feels lot stiff and I have to press hard to bring to a complete stop. Brake is not very responsive. I feel like its still rolling even after applying the brakes and I have to apply the brake very hard to come to a stop. It looks to me like there is a response delay between applying brake pedal and actual stop. I used to drive a Civic and this is my first Toyota so I am not sure whether this issue is common in camry.
View 6 Replies
My car has occasionally been exhibiting some stiffness when turning left, a harder turn and when going more slowly (like parking). It feels like a loss of power steering. There's no squeal and the fluid is full, although I don't know the last time it was changed. So far it hasn't happened when turning right.
View 6 Replies
I bought a 02 elantra gt for a good price and had about 120,000 miles. The car had after market 18" rims on it and i planned to take them off since i don't like rims anyway and the rims were making the car bouncy and didn't ride right. So i got the recommended tire size for an elantra which is 195-60r-15 and put them on. while taking off the rims I realized that there was some clamps on the suspension and I didn't know what they did so i just took them off as well. What i have noticed is that the ride is very very harsh. I feel every bump on the road which you kind of get used to but when a bad bump comes on the road it feels like the car just got dropped from the air, its literally bad and i cant return the car since i bought it "as is". At first i thought it was the tires or tire pressure but this seems way worse just to be tire pressure. I just want a smooth riding car. The car seems lower like there isn't much space between the top of the tire and the hood of the car.
View 5 Replies
The gear shifter in my auto trans 05 Elantra is really stiff when shifting different gears. I was running fine as I went to work and back today with no problems. After I got back from work, the car was off for 30-40 mins. Then I went back and started the car and the gear shifter was stiff but still shiftable. I checked under the car to and fluid leaks but didn't see anything. What may be the issue here?
View 3 Replies
Requiring that the brake pedal be depressed in order to start the engine can be a nuisance, say if the driver is out of the vehicle and the passenger wants to start the engine to run the A/C, etc.
There is a workaround though. Press the engine start switch once to go into ACC mode, then press and hold it for 15 seconds and the engine will start without the brake pedal having to be pressed.
View 14 Replies
I am experiencing a hard brake pedal about every other day if the car sits overnight. I know I am not depleting the vacuum supply before I exit the vehicle by pressing the brake pedal. Some mornings the pedal is very hard and barely moves and other mornings it's normal. My brake booster vacuum check valve hose assembly was replaced to try and fix the problem but it still does it. I also know my electric vacuum pump works correctly. Is it normal? Do I have a small leak in the brake booster vacuum diaphragm? I have no other brake feel issues.
View 8 Replies
I have owned this car since she was brand new off the lot in September of 2000. 98% of the time I have had to pump the gas pedal to get her to turn over. When she was under warranty I kept bringing her into the dealership and they kept telling me they couldn't duplicate the problem. Finally a few months ago I had to have my head gasket replaced....basically a top end rebuild. I still have the problem. What this could be? We were maybe thinking faulty fuel injection system but it should have died by now I would think after 11 years.
View 2 Replies