Elantra XD (2001-06) :: ABS / TCS Lights Came On And Brakes Occasionally Grinding


Sep 16, 2011

Ok, i have a 2006 elantra with traction control steering (TCS). Brake master cylinder went bad so i replaced that. Now the brakes occasionally start grinding when i'm driving slowly and turning (usually happens when turning into a parking spot). When I jam the brakes down they usually catch. Sometimes the ABS and TCS lights will come on after this happens.

Another problem i've had is that is not connected to the braking is that the ABS and TCS lights will come on and the car will not shift and this is going like 55 - 60 mph. I've found that if i throw the car in neutral, cut it off and back on that everything is fine. This is my first hyundai and first car with TCS. I bout this car used with 75000 miles and have only had it about 3 months.

View 1 Replies

Advertisement

Elantra XD (2001-06) :: Brakes Started Grinding Really Hard Suddenly

I am having some brake problems. They started grinding really hard suddenly one night while I was at work (delivery) on the passenger side and having recently replaced my driver's side wheel bearing I thought maybe something was wrong with the other one (seeing as how they have the same number of miles on them) that was causing my brakes to get wonky.

Drove to my Dad's to enlist his expertise. When we got it all taken apart the first thing we noticed was the rim of the rotor was all eaten up. Then we got the pads off and saw they were completely worn all the way down to the metal only on the outer edge, so they are wearing at a diagonal. Same for the back and front pad but the front pad was worse.

We thought the caliper was sticking and causing that since it was hard to move before taking it off, so we replaced and regreased the pins, and put on a new rotor and break pads.

Decided to take the other side apart to see what it was doing. Same story just not all the way through the pad yet but quickly heading that way. However the caliper pins on this side were easy to compress and quick to pop back so things were starting to stink like that wasn't our problem on the other side either.

We had a very tough time getting the caliper, although fully compressed, back on with the new brake pads. It was a struggle to make it work, but we did and then I made my drive back with less than optimal braking power which was probably not a great idea (3 hour drive.)

My dad had a sleepless night that night because nothing added up for him as to why the pads were wearing that way and having so many problems. In the morning he got online on Advanced Auto's website where we bought all our parts and then compared their brake pads to ones on OReiley's website. Well OReiley's offers two different styles of brake pad one which has a tab on the outer edge and one that doesn't. The pads that came on my car when I got it didn't have this tab and the ones Advanced auto sold us which I put on my car the time before I started having all these problems, did have a tab.

We are pretty sure this tab is causing the brake pad to sit in the caliper at an angle because the opening in the caliper is not big enough for the tab to clear it. This is why my pads are wearing at an angle, and only the outer edge of the pad is making contact with the rotor. I really only had like 20% braking power!

I still had the brake pads that came on the car when I got it so I popped those on with the old rotors before I went to work tonight (they still have a ton of pad left and its a long story why I replaced them) it's not ideal but I have WAY better braking now and its a temporary fix until I get this sorted out.

Why Advanced auto sold me these pads that don't work with my car TWICE or what I was supposed to know before going in to buy brake pads? Generally I trust that when I got in there and tell them what my car is and ask for a part they will give me the part that works with my car. And one time being wrong is fine but twice at two different stores?

View 6 Replies

Santa FE SM (2001-06) :: Brakes Make A Grinding Noise - ABS / ESC And 4 Wheel Drive Lights On

2004 Santa Fe, after starting car the brakes make a grinding noise, the nthe ABS, ESC and 4 wheel drive light come on. After the initial grinding the noise stops and the brakes work fine. Just the lights stay on.

View 4 Replies

Elantra XD (2001-06) :: Brakes Making A Grinding Noise And Thump Sound Coming From Passenger Side Front

So, last week I got my transmission replaced and they also had to replace the CV axle because it was damaged beyond repair when the Transmission self-distructed. They drove it after all the repairs and said it was driving fine, just that it had a belt squeak.

On my way home (30 min drive) about 10 minutes in, still in the city, my brakes start making a grinding noise and sort of a thump thump thump when I brake which sounds like its coming from the passenger side front, it makes me really nervous. It doesn't sound like any brake grindy noise Ive ever heard before and it wasn't making any brake noises before it broke down. (On a side note: it also made a weird noise maybe the first 3 times I drove it after getting it back and I turned the wheel hard to back out of a parking space, that used to be when I heard the belt squeak but I haven't made it squeak since I got the car back.)

Everyone I talked to said it sounded like it needed new pads so tonight I bought new brake pads and rotors for the front and got everything taken apart. The rotors didn't look bad at all, just some light surface scratches, nothing deep, no warping I could see, and the brake pads look almost brand new. I did notice that the inside brake pad on the passenger side was missing its little metal plate that is usually between the caliper and the pad, so I went ahead and replaced all of the brake pads hoping this lost metal plate was the issue.

I also turned the rotor by hand on each side while the brake pads were off and the only difference I could notice was when turning the passenger side one it made a little more noise almost like it was loose.

I got everything put back together and drove around the neighborhood with my boyfriend in the car to listen, the grinding noise was gone and it seemed to brake really well (never got above 30 mph.) However, on my way to return the rotors to advanced auto (45-50 mph) it started making the thump thump thump noise but without the grinding, still on the passenger side. I can feel it in the gas pedal and now it not only happens when I'm braking, but also any time I let my foot off the gas pedal. The only time I dont feel/hear it is when I'm accelerating.

View 3 Replies

Elantra XD (2001-06) :: 2002 - Rough / No Start Occasionally

My GF has a 2002 Elantra, and recently, she's had a remote start kit put in her car. Previously, though, we were moving something in/out of her car and broke the shift knob and the rod became bent, so we had to bend the rod back to be able to put the car back into park. (The car is an auto).

Recently, she's had a couple rough/no starts from her car. There have been a few times where she would come over to my house and the car would not restart soon after she turns off the ignition. However, the car will start rough about 3 hours later and run perfectly fine once it cranks. This doesn't happen often, but enough to be troublesome.

The problem with this though is the fact that sometimes it starts and sometimes it doesn't, and it runs PERFECTLY fine. The lights are not dimming, the battery is not dying, the car has not required to be jumped. While having these problems we drove the car around for about 5-6 hours and it was perfectly fine. Her dad thinks it's the alternator, but the battery hasn't been losing any charge and the battery hasn't been dying. There has been one time where her father moved the shifter up and down and put it back into park and the car started just fine. Could this be related to the shifter, and how the car isn't reading that's it's fully in park to relay ignition? Her dad said he tested the alternator and it was "bad," but like I said, if the alternator was bad, her battery would be losing charge, and that is definitely not the case.

View 7 Replies

Hyundai - Elantra :: 2007 - Brakes Make A Grinding Sound When Tried To Stop In Icy Conditions

The brakes on my 2007 Hyundai Elantra make a grinding sound (almost like finger nails on wood) when I have tried to stop in icy conditions. It's also hard to get the car to stop and I end up pumping the brake. A Hyundai dealer replaced the front brakes over a year ago and Adirondack tire replaced back brake pads in the summer. Is the noise part of the anti-lock feature or does it sound like a problem?

View 10 Replies

Elantra XD (2001-06) :: Steering Stiff When Turning Left, Only Occasionally

My car has occasionally been exhibiting some stiffness when turning left, a harder turn and when going more slowly (like parking). It feels like a loss of power steering. There's no squeal and the fluid is full, although I don't know the last time it was changed. So far it hasn't happened when turning right.

View 6 Replies

Elantra XD (2001-06) :: RPMs Occasionally Bounce Persistently Below 3000

I've got an automatic transmission 2002 elantra 2.0 that I purchased in 2009. About a year after owning it a weird problem developed that I've just sort of lived with since. Between 25-40 mph my RPMs occasionally "bounce" persistently by an amount between 500 (mild) and about 1000 (severe). There's a bit of fluctuation insofar as what RPMs/speeds it happens at depending on outside temperature and how warm the engine is (higher temps correlate with this issue happening at higher RPMs and a more pronounced fluctuation), but it's a consistent issue every time I drive. It *seems* like my car is always trying to push down the revs, hits a certain low point depending on the gear/speed, then jumps up just a bit only to edge back down. Lather, rinse, repeat. It's not simply a display problem as I can feel and hear the engine revs changing.

No fluctuations at idle. Above 3000 RPMs it's ALWAYS smooth sailing. When I'm actively accelerating there's never a problem, even if my acceleration stays in the revolution problem range. The car is never in danger of dying, but if the cruise is engaged (ESPECIALLY in the 25-30 MPH range at operating temp) the car shudders uphill - I assume this is because the RPMs dip a bit too low for the gear the car is in. If I press the throttle the car responds normally. This bouncing RPM issue itself NEVER causes the car to shift gears in response, and if it's happening and the car DOES shift everything works fine until it goes back to trying to maintain RPMs in the problem range. When it happens I usually just increase speed by 5MPH and it goes away, though if the car is warm and the speed limit doesn't allow me to go fast enough to get out of the problem range it just does the same thing at the slightly higher RPMs.

When the problem started my car threw an OBD code - I didn't read it myself and brought the car to a random service shop who SAID they changed the throttle position sensor, and the code was gone, but a few days later it was doing the same thing without throwing a code. I tried changing the fuel pump thinking it was a fuel delivery problem, but that didn't solve anything. I put seafoam in the fuel system monthly so I'm fairly certain that fuel system gunk isn't an issue. The symptoms haven't changed AT ALL during the 6+ years this has been happening.

The kicker is that a few years ago I found a SUPERB mechanic - the first one I've ever actually trusted to be not only competent but also honest. Described the problem and even demonstrated it to him. When I brought in my car to have the struts and mounts replaced he spent two days trying to figure out what was causing the RPM issue too... and couldn't nail it down.

Possibly related: after starting the car - regardless of how long it's been running - there's a brief delay between pressing the gas pedal and the engine responding. Delay seems *slightly* longer the colder it is outside, but it's never more than a second and a half. No further delays unless I shut the engine off and turn it on again. Replacing the fuel pump didn't affect this matter whatsoever.

View 2 Replies

Elantra XD (2001-06) :: After Fill Up Car Will Occasionally Sputter Or Sometimes Stall During Idle

I just picked up this 2005 Elantra last month. She runs GREAT - except after filling. Then she will occasionally sputter or sometimes stall during idle. Otherwise, if tank is below 3/4 (approximately), she runs fine.

View 7 Replies

Elantra XD (2001-06) :: 2003 - Metallic Rattling Occasionally In Certain Conditions

Driving an '03 Hyundai Elantra. I've noticed that occasionally when turning and also when driving at around 55mph or so, there is a metallic rattling sound that seems to be coming from the front driver side of the car. What this could be?

View 3 Replies

Elantra XD (2001-06) :: 2003 Hesitates Occasionally And AC Stops Blowing Cold

I'm having a problem with my 2003 Elantra. Occasionally it hesitates (acts like it is going to run out of gas). When it does this the a/c stops blowing cold. Lasts for 3-4 minutes. Most recent time it had 1/2 tank of gas. I also have a problem putting gas in. I have to fill it very slowly or the gas pump will keep clicking off. I don't know if they are related or not. What fuel problem will affect the a/c?

View 1 Replies

Elantra XD (2001-06) :: Check Engine Light Will Pop On Occasionally And Code Reads Random Misfire

2004 Elantra AT ... 6 months ago top of the radiator cracked caused it to overheat and blow the head gasket and warp the head. Repaired that and compression is fine now. It ran great for 4 months but now it randomly stalls. at or near idle. Seems to do it more at operating temp rather then cold. Occasionally the check engine light will pop on and the code reads (random misfire). It acts just like it has been shut off. But immediately restarts.

View 3 Replies

Elantra XD (2001-06) :: Grinding In Second Gear

I have a 2005 5 speed manual elantra that I let my wife drive it home when I drove another vehicle and the next day when I went to drive it it started grinding going into second gear. What can be causing this? The clutch works great on the other gears.

View 1 Replies

Elantra XD (2001-06) :: Metal Grinding / Chugging Noise

I have a 2006 Elantra 4 cylinder with only 55,000 miles put on it.

Whenever I accelerate I hear this noise that sounds like a lawn lower under my hood, usually only there until around 45 MPH, then it dies down a bit. It as been getting louder and more....... screechy..... as of late.

Also, when idle, there is a sound that almost sounds like a metal grinding chugging noise. It comes and goes with no real rhythm or timing.

Additionally, there is a metal grinding noise coming from what seems to be my front right wheel area when I make wide right turns, as well as intermittently while driving regularly.

To my knowledge, neither of the motion noises seem to be happening above 45-55 MPH, or they are too soft to hear at those speeds.

View 1 Replies

Elantra XD (2001-06) :: 2003 - Grinding Noise From The Rear

2003 Elantra GT ... Yesterday I went out and heard a sort of grinding noise from the rear. I thought it was the brakes. This morning I took it to a mechanic and he said it was the brake pad rubbing on some rust on the rotor.

This evening my wife took the car out and, in addition to the sound, said she smelled burning rubber. So I took it out and after a while figured out it is the bottom of wheel coil (see photo) on the rear driver side rubbing against the tire! I assume the mechanic didn't spot it because it may move out of contact with the tire when the car is lifted up. What happened here?

View 17 Replies

Elantra XD (2001-06) :: 2002 - Grinding Noise On Reverse Gear

My car has been making this grinding noise for the last 2 months. It happens when I put the car in reverse gear and slowly release the clutch. Rarely happens also in 1st and 2nd and 3rd and is always at the beginning of the transition when I am letting the clutch go. I do not know if it is the transmission, the clutch or any other part. I drive a 2002 Hyundai Elantra 5 speed manual transmission with over 120 k miles

Here is a link to a video I posted so you can hear the noise it makes : [URL] ....

View 19 Replies

Elantra XD (2001-06) :: Brake Lights Out But Tail Lights And Turn Signals Work

I found out last night that all 3 of my brake lights are out. However, my tail lights work, and my turn-signals work. So obviously its not a big wiring deal. I was looking for the brake switch but i don't know where its at because i looked underneath. What fuse is the brake lights cause my manual doesn't have it listed. I drive a 04 Elantra GLS.

View 6 Replies

Ford - Brakes - Gasoline - F150 :: 1989 - Both Rear Brakes Stuck Occasionally

I recently bought a beater '89 F-150 (I-6, MT) with the following problems:

1) Both rear brakes seem to stick on occasion--almost like there was a "check valve" on the rear brake line. When that happens, there is a "BRAKE" and "Rear ABS" light (although the light does occasionally come on without brakes sticking noticeably).

What I noticed in Haynes is that the "RABS I" system functions in the following way: a) Upon noticing rear axle spinning slower than front axle, it actuates a valve, isolating the rear brakes b) If the problem persists, it then dumps the pressure back into the main system.

So, I wonder: Is this an ABS system acting up? If I were to (temporarily) de-power the ABS setup, would it default to "no ABS," or would I need to remove the hydraulic valves from the brake lines? (Don't really want to if I don't have to.)

2) You can select either fuel tank, get that tank's level to indicate on the fuel gauge...yet it only "draws" from the front tank.

Again, Haynes says there is a low pressure pump in each tank, feeding a high-pressure pump in essentially a small "header" tank. The "dual-function reservior" has a wholly mechanical selector, and notes that "Tank switching versus gauge conflicts can occur under certain failure mode conditions."

So: I can understand that the mechanical selector can, in effect, "stick" on one tank. But what I don't understand is how it can still draw from the front tank, with the "rear" tank selected (and presumably, that tank's low-pressure pump trying to feed the header tank.)

Is it possible that the low pressure pump--while beneficial to prevent gravitation at the main pump--isn't strictly necessary to fuel the engine? Or do I have a problem with a low pressure pump that's "always on," regardless of the selected tank?

View 2 Replies

Elantra XD (2001-06) :: Loud Grinding Noise Coming From Front Of Car When Decelerating At Low Speeds

Having problem with my car (2001 Elantra GT) - over the last month or so it's been occasionally making a very loud (not but consistent) grinding noise coming from the front of the car when decelerating at low speeds. The noise sounds like gears slipping over each other but cuts in and out. It's pretty loud and not a nice noise to hear! Sometimes it makes the noise when I brake firmy but not until I reach lower speeds... mostly it's just when coming to a stop, but it did it once last week when I was pulling very slowly out of a parking spot and not even braking.

As it's become more frequent (going form maybe once a week to several times every car journey) I have started to feel something in the brake pedal also, like there's something kicking it from behind. I took it to a mechanic and had to pay a ton of money to get a broken front left ABS ring replaced (it also had the front right ring replaced in May), and within 2 minutes of driving away from the place the noise was back. Before I spend even more money that I don't have on taking it back for extra diagnosis.

I'm told that this is almost certainly the ABS system that has a fault even though the ABS light never shows except when I start the car, and I've taken the fuses out of the ABS in order to confirm that it is. I haven't heard the noise after a few days of driving with ABS unplugged so I think we can be reasonably sure here. Is there anything that I can check myself or test (I'm not very handy when it comes to cars) or can you tell from this information what it's likely to be? Other things that I've noticed with the car which may or may not be relevant are:

- the warning lights for brakes, ABS and TCS are all lit with the fuses for ABS1 and ABS2 taken out. I take it this is normal for all 3 to illuminate with the fuses out?

- since unplugging the ABS I've noticed a slight metallic squeal from the brakes as if the brakes are worn down. Didn't notice this before I unplugged ABS though it may have been there, not sure.

- sometimes when going over a speed bump or just a minor imperfection in the road I hear a clunk in the front of the car and feel something move in the underside of the car. Happens mostly at lower speeds also, but not if I go over the bump really slowly.

- in the fuse box when I took out the ABS fuses I noticed there was a bit of minor melting/brown burn marks on the top of the connections marked (iirc) ECO3 and ECO4 on the diagram (large white connectors). Is this anything to be concerned about?

- sometimes when I have air coming into the car through the air vents it will become significantly warmer for a few minutes, then slowly go back to normal. Can't think of any circumstance that links the times when this happens (eg. speed, weather etc).

- the oil pan has a leak which is on the list of things to fix when the car works properly.

View 2 Replies

Elantra XD (2001-06) :: Belt Squeaks And Sometimes Sounds Like Grinding And Lose Power For 4 - 5 Seconds

I have a 2005 Elantra GLS. I've noticed that anytime it rains or I hit a puddle, my belt squeaks and sometimes it almost sounds like it's grinding and I lose power for 4-5 seconds. From the front passenger wheel well, I can clearly see the belt. I noticed there are holes drilled into the frame, and I was wondering if there is suppose to be a guard there to prevent water from getting on the belt?

View 2 Replies

Elantra XD (2001-06) :: 2004 - Transmission Making Slight Grinding Noise When Putting Into Reverse Only

No codes, transmission makes a slight grinding noise when putting it into reverse only. Has a slight bump from 1st to 2nd. I flushed 16 quarts of the sp3 through it. Been researching and see a lot of talk about the output and input sensors. Not my car but my sisters. Needs axles, timing belt water pump, ps return hose, plus have champions in there and old ass hyundai wires.... thing does idle rough, motor mounts are new.

View 1 Replies





Copyrights 2005-15 www.bigresource.org, All rights reserved