I've been catching up on some minor things with my car and have gotten to this one issue I've been having. When I take off from a stop I get a very slight click. Not every time but most of the time. It's a 2005 Elantra GT 5 speed. I replaced both axles due to torn boots. There is no play in the front end whatsoever, so I have ruled out ball joints and tie rod ends. Anything else I should look at?
View 15 RepliesI just purchased a 2005 elantra with 133k on it and she runs fine other than a slight erratic idle. And by slight I mean it will jump about 50-100 rpm idling and every blue moon it will jump up to 250 rpm sitting there. After idling for a while my CEL came on with the following codes.
P0507 idle air control rpm high
P0506 idle air control rpm low
P0170 fuel trim malfunction bank 1
P0121 throttle position sensor
What could be causing this? I took the iac off and cleaned it with maf cleaner but it didn't work.
I bought my car from the dealership new in 2006. 2005 Elantra GLS 5 Door. I did not know that there was an alarm nor has it ever gone off before in the 7 years that I've owed it. Three years ago I had an autostart put in. No longer have original remotes.
Today I used my remote to unlock my car doors. When I opened the back door an alarm started to go off on my car and the headlights were flashing (no horn honking). I tried using the key to unlock in the door and in the ignition to make the alarm stop.
I unhooked the battery and as soon as I hook it back up the alarm continues. Called the autostart company and they told me the autostart didn't come with an alarm. I called the dealership and they said if it was a factory alarm that it would honk and not make alarm noises.
Found my original window sticker says "keyless remote entry w/ alarm" .. Other than having my car towed to the dealership, how can I make this alarm stop?
I have a 2001 Subaru outback. Recently I've noticed a rattle when I accelerate, especially when I take off from a dead stop. I sounds like it's coming from the front wheel area. It also occurs sometimes when making a turn and then accelerate. It almost sounds like an object in a box and someone is shaking the box-very noticeable.
View 3 RepliesI know its a normal function of the car, but has noticed when you come to a stop at a light or what not, you hear a click, like a servo or something in or near the shifter (automatic). Not worried, just would like to know what it is that clicks and why?
View 8 RepliesMy wife and I are new Elantra owners, car is just about to hit 9000 miles on it. I don't know when the noise started happening, but wasn't too long ago. My wife is okay with it, but as for me I find it rather annoying that the car is so new and already making noises. I call it a click but she describes it as a thunk.
Here's the details. The car is an automatic for starters. The noise mainly happens when accelerating from a dead stop. I'll be at a red light and when it turns green, I let the brake go and gently step on the gas and click...there is the noise. Its just a single click, loud enough to annoy me and loud enough that I could hear it when the radio volume is set to 12 or so.
It has also happened mid driving when I release the gas pedal to slow down without using the brakes. Right when I release it, I hear the click...once again a single click.
Now I have taken it to the dealer as a concern because that click wasn't there when I bought the car. They told me it was normal and after waiting 2 hours for a simple oil change to be completed I wasn't ready to argue with them. But I am getting to that point that I'm ready to argue with them, considering the car is so new and still under the warranty.
I think something is wrong with my brake. I only have less than 3k miles on my 2012 Elantra GLS. But now, when I apply brake to stop from either a very low speed or high speed, I always hear a clear click (only one) sound which probably comes from under the car or brake pad (front driver's side). It sounds like metals collision. When idling, applying brake does not make any sound.
View 12 RepliesWhen we first bought our white 2013 GT used (21K kms) it made a slight moaning sound when you would start off from a stop while engaging the clutch. Dealer was able to replicate and diagnosed it as a bad clutch release bearing. Replaced it and moaning sound was gone. Free under warranty. Been fine ever since and car is now at 75k kms.
I just drove our other GT (black 69k kms) for the first time in ages as normally another family member drives it. I immediately noticed the same moaning sound when starting from a stop and releasing the clutch. I'm betting it's the same bearing. Is this a common issue?
Noticed A Slight Hesitation On Take off?
View 23 RepliesI am trying to fix the pesky hard start that I have. My car doesn't start right up anymore unless it is frozen cold. Other than that it takes 2-3 cranks sometimes 4 to turn over. That's annoying and embarrassing and I am trying to remedy it ASAP.
I have a check valve and Purge valve on hand right now. In my research it seems this is where I need to focus. I do have an engine code it was P0456 this time. I also have a gas cap.
I have a check valve because of the all too familiar cutting off early at fuel pump problem. I wanted to start there first since I am sure something needs repairing down by the fuel tank and since the problem is common. And hopefully the valve will work with the fill up and MAYBE with the start, if not that is where the purge valve comes in.
I got as far as get the 2 12mm bolts off and then couldn't make it any further.
I've recently been hearing a grinding/vibration noise on takeoff. I only hear it pretty much as soon as my foot comes off the brake, when the car is in drive, and the car gets its first bit of forward engagement/movement. It seems to only happen when the DSG engages in drive, before I put my foot on the gas pedal.
The closest thing I can say it sounds like is an exhaust rattle, but way less violent/not metal on metal sounding.
I've noticed that on cold starts after work, or in the mornings in start up my Santa fe's really rough at idle.. I'd like to say even slight hesitation when I take off.. I notice a drop in RPM and lately harder shifts out of first..
My sf is the 3.5 AWD w/ nav it's a month old with 2900 Kms on it..
Just read the comsumer report "Annual auto issue", it reminded me the hesitation issue with the 2.0T (... page 70: We found the Passat hesitates slightly on takeoff from a rolling start..."). Is it a common problem with the turbo engines? it could be deadly when you change lanes on a busy highway.
View 7 RepliesI am having trouble with my car bottoming out, scrubbing with slight bumps, and if I have 3 or 4 people in my car the back left tire scrubs 100%. I think the shocks are stock OEM and car has 130k Miles on it. Tires are also wearing REALLY fast and on one side. I need tires, alignment. I will not do this until I get the suspension fixed. I can NOT find Quik Struts (with the springs already compressed and in the strut housing. I can't even find the springs themselves anywhere. All my local parts places state they do not carry them. I can find Strut assemblies all day, but struts are a no go.
I am a bigger guy, and would like slightly stiffer suspension, and some that keep the car a tiny bit higher than normal. 2006 Elantra GLS....
I am having a slight hesitation problem on my 2002 gls. When the car is cold and I am shifting with low rpm there is a slight hesitation untill higher rpms then it seems to clear. I wouldn't say a "stutter" or enough to "buck" the car but definitely noticeable. The strange thing is when the car gets up to temp it seems to stop. Almost like a carb on an older engine.
View 3 RepliesI have just purchased a 2005 elantra fx and noticed a vibration all the time in the steering and you can feel it in the seat on the floor and peddles, not severe but enough to be annoying. I had the same vibration in my last car a 2001 elantra. Is this normal with these cars, or could it be something like engine mounts as there is a very very slight clunk on acceleration ?
View 2 Replies2003 Hyundai GLS
Starts fine, loud motorboat like noise ... then car hesitates when put in any gear for a few seconds before moving ... then drives fine. Slight shutter at low speeds 30 and under....hit the expressway and its all good. Is that the fuel pump, a relay, what? It has a brand new radiator, gasket, thermostat and cover...so its not the cooling system.
Also...the check engine light is on, the pcm code says its only issue is the cat con...I don't think this issue is related cuz it was already on when the radiator killed in the middle of the highway....the noise is new. The hesitating isn't....that's been going on since before the check engine light came on....but its getting worse.
I have an 03 Elantra with a slight hum coming from the front left wheel area. It starts after 35 mph, does not seem to get louder as speed increases. I have about 3500 miles on Pirelli P6 plus 195 60 15 tires all at 35 psi, front brakes are new, cv boots are not cracked or torn and I do not notice any abnormal heat coming from front left hub(wheel) bearing area.
View 1 RepliesI have a 2005 hyundia elantra, i just recently noticed mainly while I was driving on the freeway or at higher speeds when I let my foot off the pedal my vehicle would slightly jerk and quickly decrease speed for a second, I then noticed my engine light was on. I stopped at a free computer test auto shop (o' reiley's ) and the test stated trouble code p1505 code definition - idle charge actuator signal - low of coil 1.
View 5 RepliesNo codes, transmission makes a slight grinding noise when putting it into reverse only. Has a slight bump from 1st to 2nd. I flushed 16 quarts of the sp3 through it. Been researching and see a lot of talk about the output and input sensors. Not my car but my sisters. Needs axles, timing belt water pump, ps return hose, plus have champions in there and old ass hyundai wires.... thing does idle rough, motor mounts are new.
View 1 RepliesI have a 2005 F150 5.4 and I recently got a p0175 code. I've replaced the M.A.F. sensor, fuel injectors, fuel filter, new plugs, coils and checked the vac lines but I'm still getting a p0175 code. Ive reset my P.C.M. and the code stopped for 2 weeks but returned later. The truck runs fine when I erase the code but when it returns it hesitates on take off and has a slight shake like a misfire and it makes a bubbly popping sound from the exhaust. Im at a loss of what to do next! Could this be a code stuck in the P.C.M.? My mechanic thinks it may be the cam phasers!
View 5 Replies