My cruise control wouldn't engage this afternoon and once I got home I noticed that the brake lights including the third light are on. Headlight switch is rotated to off position, checked brake fluid and its normal, backed car up and hit pedal thinking something might have been locked up but to no avail.
View 4 RepliesI have this weird problem with the cruise control of my 2002 elantra gt: I cannot set the cruise control at 30 or 40 mph, but I can do it somewhere above that (just went to the highway and set it around 60 mph). What could be the problem? Do cruise control systems need calibration or would I have to replace it?
View 2 RepliesOur 2002 Elantra (automatic, 57000k) seems to have a blown transmission. A few days ago, it sounded like the car was "whining" and then it was having difficult time engaging next gear and eventually check engine came on and the car stalled. Firestone said it's a transmission problem.
We've had the car for less than 10 years so technically this should be covered under their powertrain warranty but I have a strong suspicion that the dealership will find a reason to not honor the warranty. It's still below 60k miles so we really didn't have to replace transmission oil.
On my commute home today I tried to engage cruise only to find that would not engage. I cycled the switch a few times but that didn't work. I told a friend of mine about it and he mentioned that he experienced problems with his cruise on his GTI after he had switched the units on the MFD. Even though I didn't switch my units, when I got home I put the car in park and changed the units from U.S. MPH to KM/H and then back again to U.S. MPH. Lo and behold, cruise worked again afterward. Strange.
View 15 RepliesI searched here, but could not find anything. My cruise control would not engage this morning. Worked fine yesterday on the way home. Of course the car just passed 30K Miles (now at 30,800) and will be out of warranty. I looked in the owners manual and could not find the number for the fuse and if it is in the right or left panel on the dash.
I will also check tonight when driving home if I can shift into gear w/o pushing the brake and if the green "push break pedal" indicator comes on or not when I try to shift into gear w/o pushing the break pedal. I read on this forum that this could indicate a fault in one of the switches at the brake pedal.
BTW, it's a 2010 Touareg with the 3.6L V6 and 30,800 Miles on it. So, what fuse to check??
I have a 2.4 camry with 1 big mystery. I can't get the cruise control to engage. I've tried everything, took it to toyota who put it on the computer, but nothing is showing, no faults anywhere, and i mean none, every switch for the cruise comes up as working fully and the light also comes on for it.
View 6 RepliesI have a 2006 Prius and was just on vacation for two weeks and my Prius was stored in my garage. My wife just drove the Prius about 6 miles and all the dash lights came on. The car still drives, but the cruise control won't engage. A few months back I replaced the aux 12 V battery as it somehow died, so I don't think that is the problem. When the car is off, the aux battery voltage is 12.5 volts. When it is running the voltage is 13.9 volts.
I disconnected the aux battery and then reconnected it and all the problems went away for a while. Cruise control worked again, too. I just drove it a few more miles and it happened again and just as I got home to go up my steep driveway it would only go about 3 mph. Is that the "limp mode" I have heard about? What this might be? All the dash light are lit - red triangle, check engine, VSC, Brake System, etc. I am a newbie to this site, but I did a search and didn't find much that sounded like this problem. All the lights came on previously when my aux battery died, but the car wouldn't start, so this is somewhat different.
Bought a Sonata Limited with 5500 miles on it from local dealership. Soon after I noticed that the cruise did not always engage. Problem is that when I brought it in for service, no one was able to duplicate the problem. What to do?
View 4 RepliesMy cruise fails to engage, sometimes first thing in the mornings, sometimes in the afternoon, cold engine or warm, fresh start or on resume. After the car is turned off for a few, something is resetting it and it then works fine. Wondering if this has something to do with a faulty switch, fuse, or whatever. I've tried the cruise switch on the stalk in turning it off for a while, keeping it pressed in, turning it back on, everything.
View 6 RepliesQuestion regarding a 2002 Dodge Dakota, 2wheel drive ext cab 100,000 miles 6 cylinder engine. Cruise control stopped working, get the indicator light on dash, but no cruise.
Would I start with the Clock Spring? Will Durango parts interchange? ABS Light, was told the problem is the main unit that mounts on the driver side fender. Have tried replacing with other units from the local scrap yard, but still get warning lights/sounds.
I have a 1999 VW Passat that has a problem with its cruise control that two dealers have not been able to solve. Most of the time I cannot engage the cruise control. Other times it will work properly for 30 minutes. On a rare occasion, it will work properly for several hours. It does not seem to matter what type of road I am driving on. On the rare occasions when it works properly, it does not seem to matter if I stop the care and shut off the engine.
It appears is is there are times when it stops working that stopping the care and shutting off the engine is useful when I begin driving again. However, there is nothing consistent about when it fails, and when it again functions. The dealers have said little more than the cruise control is not working. One dealer installed a new break pedal sensor which did not resolve the problem.
I had a nice level straight stretch in front of me and engaged the cruise control. No go! I tried a few more times and it still did not engage, even with various button sequences. My thought was that this truck is a computer on wheels. So at the next opportunity I stopped and shutdown the engine, turned the ignition switch OFF and then restarted started the engine (and rebooted the computer). The cruise control works fine!
View 14 Replies2000 F 150, 4.2 v6, M5OD-2 Manual Transmission, LX, reg cab .. Cruise Control passed all static and dynamic self test. All fuses inside and under hood checked good and still cruse control will not engage. All other functions work: brake lights, turn signals, etc. Green cruise light is operational, checked pin #10 on wiring harness at servo,amplifier unit under hood and have good ground. The Cruise ON button will not turn on cruise control system and will not light green cruse light.
View 4 RepliesThe green light comes on but the cruise control does not engage. It did work one time the other day but usually doesn't. What should I check?
View 2 RepliesI recently purchased the 2006 Mazda Tribute and the previous owner has confirmed the cruise was not working. What I have looked at:
Checked fuses
checked cable and connections
check connections at unit
What I have is the cruise will power on (light on dash comes on) but it does not appear to engage. I tried to use the diagnostics built into the car, where you hold the off button and turn the key on. I get a flash for off, and on, but do not get a flash when I push the resume button.
I have an 02 f150 5.4 and since I got it it hasn't had cruse control. I went to a local ford dealership and they ran the vin and didn't find any recall on it. Under the hood on the master cylinder there is brake fluid coming out of the brake control switch. Would I have to do something with the harness too?
View 9 RepliesI have a 2000 f250, 5.4l triton v8 that cranks like crazy, but won't start. When I spray a little starter fluid in it it will run until the spray wears off. Brand new battery and full gas tank. it does have check engine light on dash, probably from the o2 sensor as the exhaust has almost completely rusted out. Also on a side note the cruise control will not engage.
View 6 RepliesOk, today on my way to work, I got up to speed and turned on the cruise control. It worked fine. I then stopped on my way to work to get a bottle of water. I got up to speed and went to hit Set. Nothing would happen. I ended up getting off at the next exit and turn off the car completely. Restarted the car and got back on the interstate. Got up to speed, turned on the cruise and hit Set. It worked. On my way home, no problems. It was just strange.
View 21 RepliesI have a 4 cylinder manual transmission that the cruise control won't set. The light will come on it just won't set. I don't see any vacuum hoses and can't find any blown fuses. All the lights brakes, parking, and flashers seem to be working fine.
View 4 RepliesWon't turn on and if and when it does turn on it won't set.
View 16 RepliesFor the 4th time now my cruise control doesn't come on (had the car almost 4 months, with 6500 miles). The main "cruise" light comes on, but when I hit the "set" button nothing happens.
All except one time I had to remove the key before it would work again. One time I kept trying the "set" button and it finally worked. It's so infrequent, they'll never be able to recreate at the dealership. Not sure if I should just try to report it for documentation purposes, so if it happens to be permanent after warrantee expires hopefully it will be covered.
Back in the day, cruise was controlled by vacuum pressure but I don't know if that's the case any longer.