So I just got my new 2015 Elantra SE - and of course, noticing every detail that is different. I feel as if it is 'skidding' when driving on uneven surfaces - and I don't mean off road, just regular I-95 and major roads with humps and bumps in the very old and used roads.
View 4 RepliesI took the R in for a passenger side seat issue (recliner not working), and while I was there I had them look into a light knocking noise I was experiencing.
The noise would happen most noticeably at low speeds, over uneven road surfaces...but not over things like speed bumps. I checked under the car, checked the hatch, made sure the spare/tools were secure, and nothing worked.
VW figured out that the noise was coming from the lower rubber rear spring plate, part (1K0-512-297-D). Not sure if it was one side or both, but they replaced both.
All better now, no more noise! Just wanted to make a thread for those of you who like to hunt down and fix noises.
I have coilovers on my R32 with adjustable control arms and have been noticing a "thud" type of noise when going over uneven surfaces which appears to be coming from the rear.
I actually periodically noticed this noise when I first got the PSS's put on my car when going over larger bumps/dips in the road but lately it is becoming much more pronounced - occurring over uneven surfaces like parking ramps or driving over crappy roads. Over smooth surfaces, no problem.
Thought it was my rear sway bar bushings since they were making a really bad creaking noise, got those replaced and still noticing this damn noise.
I have a 2009 Subaru Outback with 60K miles and this problem has been present since I purchased with 30K miles. When turning left or right over uneven surfaces (like washboard dirt road, potholes, or strips of Botts' dots in a parking garage) there is a loud, audible rattle coming from the front end. It sounds like to metal pipes hitting together. The noise does not happen when driving straight.
Subaru and another garage have inspected. Front struts and sway bar links have been replaced with no effect. CV joints, ball joints have all been inspected with no issues found.
I read on a forum that it may have something to do with the power steering fluid, that when turning there is uneven pressure on both sides and it results in the noise. Possible at the steering column universal joint.
I assume since it only happens to some Subarus that replacing the correct parts will resolve the issue.
I cannot figure out where the noise is coming from. I cannot duplicate the noise just by shaking the truck even with two guys on each side. It's not a squeak, but more of a clunk or a pop. I can feel it in the floor with my left foot if I press it against the fire wall where it meets the floorboard.
View 14 RepliesI love my Elantra Limited! Put almost 7k on her already. I did notice something about the sunroof recently though. Recently, I noticed it isn't flush with the roof. It sticks up a little in the rear.
Also, I was washing my car today, and noticed that the "drip tray" (I believe it's called, the plastic around the seam of the sunroof interior), had some water in it. It seems a little water got through the area where it's sticking up.
I have an RX 450H and noticed that there is a squeaking sound coming from the dashboard. I looked at other posts where people were experiencing similar issues and noticed one post where someone had a GS 450H and fixed this issue by adding felt between the dashboard and the windscreen.
I would like to know whether this method works 100% and whether I can apply this method to the RX 450H. The noise becomes worse when it is cold and especially when the car is being driven over rough road surfaces and speed bumps.
I'm getting a "thunk" or "clunk" noise when driving over bumps/patched/uneven roads in my Elantra GT.
It's a hollow noise, I don't hear it unless I hit a bump/patch in the road. Doesn't have to be a large bump.
25k miles, Automatic Transmission. it almost seems to be one side (right) more than the other.
Is this a common issue for this model/year? What was the cause?
At idle (car is parked, no load on the engine) the engine runs at about 650 RPM. When I tap the gas - it reacts OK. Engine quickly speeds up.
However, when I want to gently, slowly increase the engine speed - say I want to reach 1000 RPM - it will not respond until a moment when it jumps up to 2500 RPM. Then it might decrease a little, but it is almost impossible to set it at 1000 RPM. I even tried to move the gas pedal with my hand.
It is Elantra HD (2009) with stick shift.
I Locked Differentials and put DAC on, but still car was Skidding while going downhill . Do I have to select any other options that will work with this skidding issue?
View 14 RepliesI am after a annoying dash noise that I get when driving over any rough surfaces. I have removed all centre console and glove box and everything else around that area and I still have the noise, its like the dash is loose some where else, I have looked around for a complete dash removal instruction thread, but can not find anything??
It looks like I will have to remove the whole dash but really could do with some instructions on how to do this as I don't want to break anything!
I own a 2009 Santa Fe Limited AWD with 56,000 miles on it. I purchased it new in July of 2009. I have started to hear a severe clunk in the front end when driving over rough surfaces/potholes. Not when turning the steering wheel. I have read about issues with front stabilizer link bushing. The Santa Fe is at the dealers and they said it is the front control arm bushings. $1000 to repair!
View 41 RepliesI have owned my 2011 CPO rx for a bit over two months now. It has 19 inch rims and Michelin tires. I find the suspension to be much harder than I would have expected on rough surfaces. For example, when I drive over even medium expansion joints the suspension is somewhat jarring. The fact that the suspension doesn't absorb more of the road surprises me. My wife drives a 2011 MDX and that is much better over similar roads. I always thought that Lexus had more of a reputation for a plusher ride. Could it be the shocks already? The car only has 33,000 miles.
View 11 RepliesJust noticed a rattle above my head when temp drops below 60, only on certain rough, washboard surfaces. I am running 44/42 PSI, so I know what I am getting into. I have no intention to fix the rattle other than cranking up the radio. I know when cars age, they eventually develop more rattles. Question is, when left alone, do rattles do any long term harm? As in loosing something else and create a new rattle, or get worse.
View 2 RepliesMy 2014 Elantra Gt bought in May 2014 and 18000km on it now, the rear tires on both side are worn out pretty bad on the outter side of the tire. I took it to one of the dealer. The mechanic said that's not about the alignment, it's because I drove too hard in the corner..... So, I made an appointment with the other dealership which I bought the GT. I was told that it need the alignment and it's not covered by the warranty. I don't mind to pay for it but just want to make sure they will fix it.
I have the KYB on it right now. should I swap it back to the oem before I go to the dealer??
Myself and ZAC1 have an identical issue regarding ride height on our GT's. The rear driver side is lower than the rest of the car (or the passenger side is higher).
In my case you can notice it just by looking at the car from a distance, mainly from the rear. Using a tape measure to check the height of the wheel well to the ground, the driver side is 26", the passenger side is 26.5". I have measured it on a variety of surfaces just in case my garage was on a slope.
My MIL is on!!!! I went to Autozone, they told me the error code is P0121. The car is running funny, with uneven idle, and bucking/not shifting.
View 6 RepliesThis morning i've been to toyota to do the regular service and to try to find that what is creating this noise on my front end ,they removed brackets etc and lube anti roll bar bushes and top mounts as best possible. Still the noise is there. We recreated the noise this morning by circling around at full lock multiple times . They said that if the lube would not solve the problem it could be the struts mount.
View 5 RepliesI'm having a problem with a rattle that's in the front end of the car. I only hear it when I'm driving over "off roads" (uneven terrain) and not streets. The sound is not entirely Metallic but sometimes I get to hear rubber against rubber. I already changed motor mounts and stuts mounts but the rattle is still there. Is there anything else I should look for? I've had this rattle for over 5 months now!
View 5 RepliesSo, I have a clunk that sounds like it's coming from the rear end, almost more of a knocking sound. It sounds to me like the driver's rear, but only hearing it in the driver's seat probably distorts my perception. The sound only occurs over bumps or uneven areas in the road. I've played with the end-links and they seem fine. I can't find anything visually obvious.
View 4 RepliesLast night I was driving to work and had the vent on...I noticed that there wasn't a lot coming out of the left (driver side) vent but a lot coming out of the middle two vents. Thought I would throw this out there in case I may have a blend door issue or something.
View 5 Replies