I tried cycling my Hi Beams this morning and noticed they are not operational. When cycling them, my fogs turn off, the indicator on the dash goes on(blue) but the Highs Don't come on. I've tried with fogs off, fogs off and reg. lights on, both off, etc. I can't find the fuse relay by referencing the label on the driver's or engine fuse boxes.
View 4 RepliesI have a 2011 Elantra Sedan and my low-beams quit working. The high-beams work fine. I assumed the obvious and went to replace the bulbs but they appear to be intact and not burnt out. This led me to believe that it is related to a fuse or a relay. That being said, I cannot locate the fuse/relay in the fuse box under the hood that relates to this. What the fuse/relay is labeled as? I assumed it was under the hood but is it located in the fuse box in the cab?
View 4 RepliesI have a 2016. I'm waiting on some aftermarket headlights and they will look great with LED drl/high beam. Have you installed them in this location ? I'm worried about fitment with the led being too big to fit in there.
View 23 RepliesMy limited has lost it's low beams when the switch is set to head lights but not when set to marker lamps. They still shine at a reduced output then. I've read this may be an issue with the BCM?
View 1 RepliesI have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
Is there a fuse for the low beam headlights of the 2013 Hyundai Elantra. The manual diagram doesn't list one, and the multi fuse seems okay. Both headlights, only a few months old, went out at the exact same time. This leads me to believe it is an electrical problem. Is there a fuse for the bulbs, or other electrical reason the low beams might be out? I have been driving around with high beams.
View 4 RepliesI will be pulling apart the back of my crew cab to replace the broken old speakers and run some new wires, thought while I'm in there I should look at the power sliding rear window. The switch has power and the fuse is good, however when pressed, the window won't move. I can move it by hand though.
View 4 RepliesMy truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 RepliesI have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
I want to replace my headlight bulbs; I want to install 8000K in my low beams, and maybe 3000K in my hi beams. But all of the bulbs that I ever installed either; A the burnt out within few weeks (lost color), or B they stopped working.
Now, regular WHITE bulbs seem to work forever; but the color ones, burn out/break. Low quality?? I need a pair of very good 9006 8000K, and 9005 3000K. Again, but I don't want to change them in a week or two. I want them to last!!
P.S. 2005 Toyota Camry
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 RepliesAfter spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 RepliesI have a 2010 Prius IV that constantly burns out the low beam bulbs. I have replaced these at least 8 times in the past few years. Sometimes they will both fail at the same time, sometimes individually. These bulbs should last for a year or more, not months! And I do not use cheap aftermarket bulbs, they have all been OEM quality bulbs.
View 6 RepliesI noticed tonight that my low beams are both out, and they were both working yesterday. Fuse #19, a 40A in a cluster of two 30A fuses appears fine when I look at it AND my horn and backup lights work just fine too. In the owner's manual it say that fuse position #19 controls the low beams and the horn (which is working) and the backup lights. SO, that says to me the fuse is ok because the other items are working.
FWIW, I can use the high beams, but recognize they're on a different fuse anyway. Also, I replaced BOTH headlamps with new Sylvania bulbs about 6 months ago when one of them went out. Could both low beam headlamps have burned out at the same time???? Is there some other fuse that controls them both other than the #19 fuse inside the engine compartment? Could this also be a problem in the control stalk switch on the steering console?
I know this mod can be done on other models of Toyota, but for 6th gen Camry? And no, I won't leave the high-beams on when oncoming traffic approaches.
View 1 RepliesStarted my car this morning (2010) and both low beams aren't working. When set to on, only the daytime running lights come on (and yes I made sure the light switch was turned all the way). High beams work fine. Turned car off/on but still no good.
View 10 RepliesSo it looks like I need 9011 HIRs for my 9005 high beams, but which HIR do I use for the 11F low beams? same?
View 14 Replies2010 Prius owner here. Both low beams stopped working unexpectedly last night. High beams still work, but when I switch to low beams, I just get the park lights.
View 3 RepliesI recently noticed that the high beams on my car are actually pretty dim (38k miles with them.) I've looked online and it seems fairly easy to change out the bulb but I wanted to know if there any specific bulb brand recommended and also I wanted to know how to add fog lights since I live in a part of the country where it snow alot and its foggy in the summer.
View 14 Replies