My car is 2012 Elantra. I want to remove the fan control knob. It was easy to pull Mode and Dual buttons straight out. But I don't know how to get the fan control knob off.
View 3 RepliesI have a 2008 Elantra GLS with approx 60,000 miles. Recently, without fail, a buzzing sound occurs when changing the vent control knob from floor to vent and vice versa. The sound lasts for about 2 seconds and sounds like it may be coming from the area behind the steering column. All the climate control systems work fine and the buzzing noise only occurs when changing the vent setting. At this point it is just a nuisance as everything seems to be working fine, but in my searching of the forums can not seem to pinpoint what the issue may be.
View 1 RepliesI have a 2010 Prius and I noticed for the first time today that the volume control knob stopped responding when I twisted it. I turned off the radio off then back on and it appeared to be working again.
My car has about 41,000 miles on it so I'm not sure if the warranty is still applicable.
This car is an Australian 2014 Elantra SE
The existing manuals do not work, they show a knob previous to this one and don't apply.
Hyundai Elantra: Console. Repair procedures - Interior - Body (Interior and Exterior) - Hyundai Elantra MD 2010-2016 Service manual
Shows an earlier one and I can't find any other info.
I have a 2011 elantra a 6 speed manual and im trying to take off the shift knob and can't seem to do it....
View 33 RepliesHow do you remove the shift knob in a 2013 Elantra GLS? I didn't see a pin or anything.
View 3 RepliesIs there a possibility of the radio itself overheating causing this issue. I experienced this the other day, was driving around and the volume control on the radio no longer worked. Could turn it off and all other functions worked but the volume could only be changed from the tracer buttons on the steering wheel. Shutting the car off and back on worked but for how long? Seems that this should be a recall since several owners have experienced this issue with the jbl stereo.
View 7 RepliesI am trying to remove the shift knob and the steps are entirely different than the DSG knobs from the GTI; You take just the boot off (not the assembly) then underneath is a hose clamp which needs to be removed. (this is not on the GTI version); I cannot figure out how to get this clamp off; I guess you need hose clamp pliers? And then do you need a new hose clamp? Won't it ruin the clamp?
View 24 RepliesTurn on car and radio does not come on nor CD. The fan speed control does not work. Basically the main turning knob appears to be in-opt? Everything else appears ok. Says CD not available? There are the following symbols: -- -- on the screen where the radio station would display.
Is there a radio re-set ?
Main control knob ?
How to remove the window control panel on your door panel on a 2010 prius? I'm not looking to remove the whole door panel I just want to take the little panel that has the 4 window controls off.
View 3 RepliesI was looking through the DIY and I couldn't find one that just removes the knob it self. I know its all the same steps to remove everything but everyone just swapped the boot and everything. I want to keep my boot and just change the knob to a solid glass ball.
View 1 RepliesI recently purchased my R32 and the previous owner installed a short throw shifter. The knob and aluminum ring look like they are installed correctly but the boot won't stay up next to the aluminum ring. I originally thought that it would just either snap into place or it would need to twist to lock it into place. I've looked at and I can't figure it out. How it is supposed to attach to the aluminum ring?
View 4 RepliesThis just showed up after I washed my car this morning.
What it means and how to remove it from my dash?
I've tolerated having to release my key with the manual push button for years. Now the interior is disassembled (after replacing evap core) so I'm looking into fixing the BTSI.
I've never been clear on whether the problem is in the console by the gear shift or in the steering column. The thing is in the steering and has a solenoid that will mechanically allow the key to turn to the LOCK position when energized. The manual release is at the bottom.
I connected the leads of that white thing to battery voltage and sure enough, the post retracts. So that seems to work. However, when connected to the car wiring, there is not enough voltage to retract. It retract, it will hold. I concluded the problem is near the gear shift. Probing the lead (with the white thing disconnected) indicate battery voltage, but that's without any current.
Battery voltage is getting to the wiring harness in the console. Probing the leads to the Park switch indicates 90 ohms resistance. I suspect this is too high and causing a big voltage drop so there's not enough to energize the solenoid in the column.
What can be replaced in the console to remedy this? Is it only the park switch?
How is the gear shift knob removed? I see a slit in the back of the knob, but don't know how the mechanism works.
I've read a few posts of people trying and they say the cant be removed but I just don't believe it! I cut off some of the rubber on the with a knife and its all white plastic underneath.. I just don't believe that its actually impossible to remove this.
View 3 RepliesHow the black trim on the bottom of the front bumper of a 2011 Elantra GLS is removed . I am talking about the black lip or air dam in the center. Does it just pull off or are there clips or something.
View 1 RepliesI tried searching and googling but came to no results, unless its like similar trucks. How do the 4x4 shift remove? I have an 04 F250 and someone decided to put the shift on sideways so the 4HI and etc read upside down before I purchased the truck. Do I just rip the thing off?
View 1 RepliesOk, today on my way to work, I got up to speed and turned on the cruise control. It worked fine. I then stopped on my way to work to get a bottle of water. I got up to speed and went to hit Set. Nothing would happen. I ended up getting off at the next exit and turn off the car completely. Restarted the car and got back on the interstate. Got up to speed, turned on the cruise and hit Set. It worked. On my way home, no problems. It was just strange.
View 21 RepliesThe knob that controls the sunroof has broken or sheared off. Still in place, but spins freely. Can still operate roof by pulling down on knob prior to turning.
View 6 RepliesWon't turn on and if and when it does turn on it won't set.
View 16 RepliesI got one of those iPod cables off eBay and hooked it up to my iPod nano today. It played music immediately, but I was not able to control the iPod through the dash or the steering wheel. Then I noticed that the eBay ad instructs you to connect the cable to the car first, turn the car on, then connect the iPod. I didn't do that the first time. An hour later, I tried it the right way. Same result. I just want to be able to control the iPod using the car stereo controls without having to handle the iPod itself.
View 4 Replies