We have with our 2007 Elantra popping out of gear under load. The car started doing this at about 110000 ks and its getting worse. It looks like it will cost about 2 to 3k to fix or replace with a second hand one.
View 1 RepliesMy 2007 elantra is starting to pop out of 4th gear whilst accelerating. Is there a fix for this?
View 4 RepliesI purchased a 2010 Hyundai Blue 6 months ago. After one month of driving the rear suspension area would pop when placed in a bind. The sound will happen when going over a bump, through a dip in the road, when turning sharply..... The pop is more of a large loud twinging sound. I have taken it to the dealership three separate times with no fix.
First time, they stated my license plate was loose and creating the noise. I pulled out at the dealership, and the sound happened again. Took it back and then they stated they heard it, but did not know what it was. Took it a 3rd time, and they informed me they changed the shock on the driver side. The sound is still there. My husband states they lower the exhaust system but did not change the shock.
What this is caused by. I notified the dealer that it was still happening, and they asked me to bring it back and drive around with the tech in the car so they can observe it. Bad part is, it doesn't happen all the time. I can't make it happen. I want my car fixed. I do like it.
2008 Hyunda Accent, 5 speed, with high mileage. She claims it slips out of 5th gear when she's driving. They're on vacation, the car is in the shop, the shop is saying that it can't find the problem...
Apparently it slips out under load (in constant motion).
It seems that it only occurs when the transmission is hot, meaning the oil has less viscosity. The dealership apparently is saying they can't find anything wrong and she isn't making it up since she said she drove from Michigan last week with her hand on the shifter the entire time to keep it in gear. Dealer is saying they aren't going to just drive it around and around until it happens.
How modern cars are built these days. I know older cars had some synchro things that would wear and allow the shifter to pop out of gear, but I read that some Hyundais have cable driven shifters....at a loss.
It happens in 4th sometimes, too, and will also pop out even when leaning on the shifter.
I did see this thread, but was wondering if there was any additional information: [URL] .....
2007 accent GS 5 speed manual. car has 142,000 miles. Trans popping out of 5th gear under load. interstate driving 65 MPH going up hill. Pops out but goes back into 5th. Car does not pop out of the other forward gears at this time. Car has very good clutch, no slipping. Short shifter, alu. trans/shifter bushing. shifter cables are adjusted correctly. Are my sliders and dog gears for 5th worn out??? Or is my fork bent?? Or both. Do I need to pull trans?
View 2 RepliesI got a new clutch & shift cables & fluid professionally done one year ago. I have only put 5k miles on it since. In the last two months the... gate/slot for 1st & 2nd have been getting worse n worse. All gears show sporadic rough shifting (read rough as a clunk or one tooth grind), but 1st/2nd are consistently rough & the gate seems to be getting narrower...
Environmental & operating temp, do not noticeably affect these symptoms.
I bought a 2010 Elantra Blue in November. It has 1200 miles on it now, but as early as the 2nd week or so I became aware that there is occasionally resistance shifting into 2nd gear despite the clutch being fully depressed. It can also make a slight "crunching" noise after passing through the neutral position and fully into 2nd (though this sound is distinct from grinding, it's not the same as if you were grinding the gears). I've tried a million times to narrow down the cause (i.e. cold weather, low RPM shifting, high RPM shifting, slow shifting, fast shifting, gentle shifting, strong shifting) but every time I think I got it, and have corrected it, it happens again anyways.
View 13 RepliesMy auto transmission in my 2007 Elantra with 125,000 miles went into default mode, stuck in 3rd gear. No codes went off. I drove it home this way, but after sitting for 90 minutes, now it works fine. I've heard about the input and output sensors. What should I replace? I went to HMA service to get info on both sensors, but it wasn't detailed enough.
View 3 RepliesI have a 2008 Elantra GLS. I am getting a code of P0750. Seloniod A fault. I have checked wiring harness for critter bites all looks good. If I clear the code the transmission shifts normal until it is shut off like overnight. I also have been noticing that it idles around 1100RPM to 1300RPM and it does drop into gear harder (reverse or drive). This high idle started before the P0750 code.
View 4 RepliesI have a 07 Elantra with 68,000 miles. I am having a cold start issue. When the car sits overnight and I attempt to start/place the car into gear (auto), the car will stall. This occurs whether the car is placed in forward/reverse and with the a/c on/off. The vehicle will start fine the rest of the day with no issues.
View 8 RepliesSo, in the last month or so I have been having trouble getting the car to go into second gear when mashing the go pedal. I have to try several times and seems to be that the car has to unload and then it will shift.
I am using the DG shifter and have been for 30k+ miles and I have the red HPA dogbone insert. The shift has not been a problem up until the last month or two.
Is it time for motor mounts?
Brand new 2015 1.8l. Under load (up steep hill) engine making a rattling noise. Sounded a little like a bad bearing. Lifted hood and listened in driveway immediately after and noise seems to be coming from valve train (not ideal test as it doesn't emulate load). This is a noise that's developed in the last few miles, not from get go. It only occurs when engine is fully warmed up and under load.
View 5 RepliesThe sound is only there when the engine is under any load. If I am very careful I can raise through the RPM without the noise, but give it a little bit more gas and there it is. It sounds kind of like an exhaust leak, but I'm not sure.
[URL] ....
Listen closely right at 0:12-0:15. That is me accelerating for 3 seconds, and that sound like a rain stick is my engine.
2013 Elantra GT ...
The glove box on my wife's '13 elantra keeps popping open. I guess the little plastic latch that keeps it up is not going into the hole far enough when it's closed, so after a while it slides out.
Would rather avoid a trip to the dealer (not even sure if it would be covered under warranty anymore, the car is over 3 years old).
My zf6 in a 2004 ford f250 6.0 powerstroke has been popping out of 4th gear (4th according to fords labeling on the shifter). It will then usually not go back into gear. At least for a little while. It does not grind when you try to put it in gear. Seems this truck likes to show its problems right before I need it for a longer trip.....go figure.
View 2 RepliesSo I washed my car today.. was wiping it a little and noticed that the right side of front bumper was loose.. then a closer inspection showed that I can lift it! I didn't collide into anything whatsoever, maybe from speed bumps or potholes?
Image Uploaded .....
Ok so lately I noticed a horrific rattling coming from the rear of my car. It happens mostly when I'm in a high gear going slow with a load on the gear. It's sort of like the rattle that comes from the exhaust with the same gear load but it's much looser and rattley sounding, and it doesn't always do it. It almost sounds like a piece of sheet metal in my spare tire well rattling when there's a gear load and the exhaust rattles. But I checked in there and it seems tight.
View 5 RepliesInstalled the wastegate actuator rod rattle clip on their R? I've been getting a buzzing sound under light load in first gear- very audible when it echos off a wall, etc.
[URL] ....
I have a 2000 hyundai accent 5 speed with 76k and a 1.5. the spark plug boots arc on all 4 plugs and can see a light blue line down the center of the wires also. But while idling you see nothing till u snap the throttle. Also driving while its under load you can really feel the miss in 3rd gear. Ok here"s what I've done I cleaned up all my grounds on motor and body ,also cleaned spark plug threads. i replaced wires with 5 different brands including factory wires and same thing. I've tried all kinds of different plugs from regular coppers to iridium and changing plug gaps with no change. the coil was replaced,crank sensor changed and does same thing.
View 11 RepliesHow to install load resistors in the front turn signals to fix fast blinking after led changing? I have two 6 ohms 50 watts resistors but I don't know how to install in the front turn signals.
View 7 Replies1991 Toyota Tercel 197,000 miles 5 speed is popping out of 5th gear, if I don"t hold my hand on the shifter it pops out.
View 16 Replies