My car just started doing this. It doesn't seem to matter if I'm at around town driving speeds or if I'm on the highway. The car does it in both recirc (max A/C) or in normal. I want to try changing my fliter first but I don't knwo where it's located or how to do it.
The car is a 2008 Elantra with 64K miles on it.
The ambient temp gauge on my '07 Santa Fe stopped working, all I was getting was flashing bars across thee bottom. Someone in a thread said there was a TBS about that. I went to my Hyundai dlr and got a copy of the TSB. It was actually pretty easy to take everything apart. The problem was that there were no wires the color I was looking for, also, there were no wires connected to the terminal as shown in the TSB. I went back to my dealer, and after a little research, found that the TSB did not pertain to my car because it was a late model year production. I was told that to fix the problem on my car, all for the fuse blocks would have to be replaced. Shortly after that, I started getting erroneous readings, eg:126 degrees. Now it is reading correctly, but who knows for how long.
View 1 RepliesI have a 2008 Elantra GLS, about 110,000 miles. Just got a timing belt and water pump change about 3,000 miles ago. Over the course of the last six months or so, she's started squealing a bit on cold starts. Originally it was only for a few seconds or so about once a month. However, since I returned from a 1500 mile road trip, the squealing has started happening on every cold start. Turning the wheel full tilt to either side does not seem to have any bearing on the noise, only when I rev the engine gently up past 2500rpms. What this could be?
View 6 RepliesPush A/C button is always on green. The (air speed) 01234 button is also always on green. the Push button turns on and off orange whenever I click it.
Anyways, the AC doesn't blow any hot air... always just cold. I've adjusted the dial to red and have left it there for a long time... no hot air. Any trouble shooting I can do?
So I'm at a momentary loss for what's wrong. My wife's '02 Passat GLX is not getting a signal from the outdoor ambient temp sensor. Both her cluster and climate control display show "--" and I've replaced the sensor, cleaned the connector and done a brief outside inspection of the wiring from their to the engine bay harness which all looks fine... In the cars defense, were the second owners, it's been dealer maintained and is in immaculate condition so there is no oil soaked or ghetto hacked wiring, period..
View 3 RepliesWhere the ambient temp sensor is located on my 02 Golf 2.0.
View 5 RepliesThe ambient (outside) temperature sensor on my 04 jeep grand cherokee is now stuck in the open position (it reads -40 constantly) after having body work done to it. Could this be a fuse, loose wires, or is the senor broken? Also could this have been damaged by the body shop?
View 8 Replies2003 Pontiac grand am 3.4 car cranks has great fuel pressure and spark will not start when ambient temp under 75 deg without hot shot then fine the rest of day..have replaced fuel pump map sensor cam sensor air temp sensor.
View 1 RepliesI have a 2001 Honda CR-V SE, and I'm having a little trouble with it ... About a week ago I noticed that as I was driving around the city, my temp gauge was going up and down. I had the heat on, and when I was pressing the gas, the gauge would go down. When I coasted, the gauge would go back up to the middle. The gauge never went higher than the halfway point. I thought it was possible that my fluids were low, so I checked the coolant reservoir. It was empty, so I added some. The radiator itself was full to the lip (like the manual says it should be, if I interpreted it correctly). The first day or two, didn't notice anything, but then the gauge seemed to start falling again.
Anyhow, I decided to drive back to the big city to get it fixed, a 3 hr drive, last night. The car seemed to be operating fine. I did not have the heat on, but there was air flowing through the vents. The gauge started to creep downward, so I thought "Hey, let me hit that button that closes the vents" I did that, and the gauge creeped back up! Problem solved right? Negative! It was raining, so when that button was on too long, my windows got foggy. So that's how I spent the next two hours, button on, button off, then I finally just opened the windows to allow the air to circulate. In the meantime, I stopped for gas, allowed the car to idle for a while (no air/heat blowing at all) and the guage didn't move. It stayed in the middle.
Closer to the end of my trip the gauge started to creep upward, over the midpoint (The first time it's done that since this whole thing has started). Once off the highway, I turned the heat on that first notch, and the gauge went back down to normal.
At any rate, so it's Wednesday. I'm planning on getting the car to a shop on Friday, but in the meantime, I just wanted to get some info out there from the community. I'm pretty nervous about whats going to happen. I just had my car at an oil change place 5 days ago, and the guy didn't put the oil cap back on the engine, so I literally was driving for 3 days with oil spewing onto my hood (Checked the levels by the way and they were fine). The only way I would've known is that I opened the hood to check the coolant levels. I noticed the gauge issue last Wed, took it in for the oil change Friday (In which they said all my fluids were fine), checked the coolant Monday, and drove it 3hrs last night.
Are there any specific keywords I should mention to the mechanic for him/her to check?
Took the Ex in today because the front AC is blowing ambient temp air. I had them re-charge the system and they tell me no leaks were found but the air never blew cool. Took it in today and they just suggested the following.
AC Manifold P&A LAB 3.0 5C72 190850 DA
68oz R134 P&A LAB 1.0
AC Oil/Dye Kit P&A
Have you ever had to do this kind of work? Is this an easy task to do?
New 2015 King Ranch. Has the navigation screen where it displays the outside temp. Just watched a youtube video where another 6.7 truck had their ambient temp displayed on the dash screen between the speedo and RPM gauges.
Also going under "gauge mode", it shows tranny and engine oil temp, move over one position it shows compass, and move over third, it shows nothing. What this third position is supposed to be for?
I have the 2012 XL F-250 6.2 v8 , I have an ambient (outside air) temperature sensor that needs replacing, I ordered it and was told it is located in the passenger side mirror from the parts guy, there is a tap in the bottom of the mirror to access it, looking for a replacement type video link of how to do this, as I am not finding one via youtube, pulling the tab off on the bottom of the mirror I am not really seeing the part I have as a replacement in the mirror.. This is the XL version/work truck so ALL manual mirrors....
View 1 RepliesSo I noticed a few days ago when driving the turbo around that the temperature gauge fluctuates... ALOT. it will warm up to full operating temp, then when driving will go way down, almost to the cold line again and SLOWLY rise up, and when I mean slowly, I mean it takes about an hour or so to get there.
Well today, I changed the oil, there were about 2 qts in there but the car was about 2k overdue. MY BAD! So upon driving around seattle/bellevue/redmond today, noticed the gauge doing the same thing, and I am stumped, IDK why it would be doing this, the car doesn't overheat or anything.
Also, the girlfriend said that when she was driving the car, in the warmer weather, even while moving the temp gauge read almost hot, and the car was telling her to shut it off etc... I seriously am at a lose here.
The other night we noticed the TAIL light was out, but the brake light still worked. Last night we were out with some friends, they said that the TAIL AND BRAKE lights were not working, but ONLY on the drivers side, the passenger side worked as it should, we also noticed that when we hit the brakes, the front drivers corner light comes on and stays on until we take our foot off the brake.
I'm excited to be a Powerstroke owner again! I had a 2000 with the 7.3L and since bought and now sold a Chevy 1500. Last week I bought a new 2015 6.7L. I am MORE than impressed and love the truck. Today I brought it to get the windows tinted. I have not had one issue with the truck since I have had it. When they finished with the windows, my check engine light was on. The shop I had it done it EXTREMELY reputable. They brought out their snap on scanner and pulled the code. p0073 for the ambient air temp sensor circuit high. Is this a coincidence that this came on after they got done, or could something they did while tinting the windows tripped this?
As I drove off down the road after determining I wasn't going to hurt the truck, the air temp sensor went from showing -40 to the actual temperature. What would cause this? I deleted the code when I got home with my actron, and the MIL has stayed off since, however, it shows P0073 Permanent ...
I do have an issue with a 2010 Toyota Corolla A/C. It is not blowing any cold air, just ambient air.
Try troubleshooting it by checking the freon on the low port. Reading was very high so it seems like the compressor clutch is not engaged. However, in reading up about 2010 version, I found there is actual no physical compressor clutch. There is also no "relay" to bypass such that you can engage the clutch. Reading further seems to indicate that it's a solenoid system, which I'm not familiar with.
I've been driving my 2012 elantra for 3 years now, and the average mpg (on the screen) fluctuates anywhere from 18 to 25 during any given trip (I don't take long trips - after 3 years I only have 14,000 miles on the car). I rarely drive on highways, so I'd expect the average mpg to be in the lower range -- but my lease is up and I'm trying to figure out if this is just a gas guzzler or if there's some malfunction of this tool, or if it's something inherent in the way I'm driving.
View 4 Replies2015 Outlook 2.5 CVT - Regardless of engine temp/or oil temp, transmission will stay in low gears (relative - its a CVT) such that the car is always doing approx. 2100 RPMs. When it occurs, 35mph is 2100 RPMs; when problem is not present, same speed would be approx 1200 RPMs. Same for higher speed. 45mph would be 2100 verses approx 1400rpm. Gear indicator does indicate a '4' or '5' when it would normally be '6'.
Outside temps in excess of 30 degress - no evidence of problem. Below 30, may or may not happen. No check engine light and it does affect MPG significantly.
I have had my 2011 Elantra limited since April. I always have the ECO mode turned on. The light fluctuates when driving as I excepted to. I know the actual mode/light doesn't really do anything, but in the last months or so, it will light up shortly after starting the car and work normal but then decide to not light and never come back on until the car is restarted. I have checked numerous times and the ECO mode is ON.
View 10 Replies2006 F150 King Ranch. My Air Conditioning no longer blows cold air. Additionally, the Temp Guage is pegged dead left. No movement at all even at normal operating temp. I've had the dealer replace 2 sensors and a wiring asy (XL3Z-14A411-AA). I still have the same problem. No cold air and the gauge is still pegged dead left.
View 3 RepliesAbout 4500 miles ago, I had the timing belt, water pump, thermostat, and all the accessory belts replaced and now, the water temp gauge sometimes rises rapidly from "normal" all the way to the "red" and back within about 15 seconds! This is on a 2006 Elantra GT
Should I replace the "coolant temp sensor" or do I have a real problem that needs repair?
AC used for the first time since purchasing the truck last Oct. I notice and passengers in truck with me as well notice that the AC is not strong at all and it fluctuates from cold to warm with a heavy damp smell almost like its letting fresh air in mixing with the cold AC. It seems to be doing this more so when driving but will also do it at at idle after driving. Of course dealership states perfect temp blowing @34 and Freon at perfect levels. Max AC will not blow you out of the truck and reg ac at lowest setting feels like its on a vent setting. When AC first comes out it smells very damp mildew smell. 2013 F-150 Limited 3.5.....
View 3 Replies