Elantra GD (2013+) :: Both Low Beams Went Out At The Same Time
Mar 28, 2015
Is there a fuse for the low beam headlights of the 2013 Hyundai Elantra. The manual diagram doesn't list one, and the multi fuse seems okay. Both headlights, only a few months old, went out at the exact same time. This leads me to believe it is an electrical problem. Is there a fuse for the bulbs, or other electrical reason the low beams might be out? I have been driving around with high beams.
View 4 Replies
Advertisement
I used to think when I flash it'll turn on the high beam only but that's wrong.
Today I changed the high bulbs 9005 to a brighter pair trying to get a better DRLs, but when I tested the high beam by flashing I realized it turns both low & high beams on at the same time.
I have HID for low beam so that's not a good thing for me to flash. And I think I did it only one time in the past but now I won't do it again. Is it normal?
View 1 Replies
I love this car- i just bought it , but it has one problem i cant figure out .The high beams didn't work at all -till my mechanic figured the prior owner took out the two fuses - now they stay on all the time - even when the car is turned off . My guess is the light switch - my mechanic said it is probably more than that...
View 3 Replies
A good while back I seen a thread to do this , but can't locate it now. I have a 2012 F250 and looking to make my night time driving better ....... I want to run both low and high beams at the same time and getting the fog lamps to stay on when going from low to high beam.
View 14 Replies
I tried cycling my Hi Beams this morning and noticed they are not operational. When cycling them, my fogs turn off, the indicator on the dash goes on(blue) but the Highs Don't come on. I've tried with fogs off, fogs off and reg. lights on, both off, etc. I can't find the fuse relay by referencing the label on the driver's or engine fuse boxes.
View 4 Replies
Is there a way to have the low beams turn on when the automatic wipers are turned on? It is a requirement in some states to do this, and would be nice if the car would do it automatically. Maybe a setting or a dealer change?
View 4 Replies
I am new to the world of maintaining my own car. I had an issue this morning when I drove my 2011 Elantra. The car started jerking from time to time while i was driving. So I ended up going back home and swapping cars. Other than a coming up oil change, what could the issue with my car be? I am at about 43k miles.
View 7 Replies
I have a 2011 Elantra Sedan and my low-beams quit working. The high-beams work fine. I assumed the obvious and went to replace the bulbs but they appear to be intact and not burnt out. This led me to believe that it is related to a fuse or a relay. That being said, I cannot locate the fuse/relay in the fuse box under the hood that relates to this. What the fuse/relay is labeled as? I assumed it was under the hood but is it located in the fuse box in the cab?
View 4 Replies
I have a 2016. I'm waiting on some aftermarket headlights and they will look great with LED drl/high beam. Have you installed them in this location ? I'm worried about fitment with the led being too big to fit in there.
View 23 Replies
My limited has lost it's low beams when the switch is set to head lights but not when set to marker lamps. They still shine at a reduced output then. I've read this may be an issue with the BCM?
View 1 Replies
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 Replies
I have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
View 5 Replies
I want to replace my headlight bulbs; I want to install 8000K in my low beams, and maybe 3000K in my hi beams. But all of the bulbs that I ever installed either; A the burnt out within few weeks (lost color), or B they stopped working.
Now, regular WHITE bulbs seem to work forever; but the color ones, burn out/break. Low quality?? I need a pair of very good 9006 8000K, and 9005 3000K. Again, but I don't want to change them in a week or two. I want them to last!!
P.S. 2005 Toyota Camry
View 7 Replies
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 Replies
I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
View 2 Replies
After spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
View 6 Replies
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
View 13 Replies
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 Replies
I recently got a CEL with a P2096 error code on my 1.8L 2013 Elantra GT auto with 18K miles. This indicates some kind of oxygen sensor discrepancy between the pre- and post-catlyst O2 sensors which could be caused by a bunch of things. I cleared the code and it hasn't returned in a day of driving.
I did a quick internet search and there appears there might be a TSB out for revising the ECU software for this problem, possibly filed under TSB-13-FL-006 or Hyundai bulletin 356015.
View 12 Replies
Is there to keep the car on an particular mode all the time? I prefer driving on Sport mode but everytime I restart the car; it defaults to normal mode.
View 2 Replies
I have a GLS 2011 and since wednesday my car alarm seems to be working one out of five time. The doors locks but no horn chime and no corner lights flashing.
Checked all the doors and the hood and everything's closed. Also checked with my backup remote and nothing.
View 6 Replies