Corolla / Matrix 2009-13 :: Vibration / Buzzing Noise From Passenger Front Door
Feb 20, 2015
So my passenger front door is vibrating inside somewhere ... tho' it could be the door panel itself possibly !?
I've removed the door panel hoping to find something loose inside that is causing this buzzing. All the door panel's locating pins are intact and secure the panel as they should. In other words... The door panel secures as it should and nothing looks broken at it's attachment points.
The noise does not occur on a smooth road surface...and only occurs on rougher road. So I realize the vibration is being transmitted by road vibrations.
I can hear/feel a lite jolt from the tire's contact with the road's surface irregularities and if the road surface remains consistently rough ... that jolt turns into a buzzing drone type noise. Well ... at least until I hit a smooth road surface again. Then the buzzing subsides. No, it is not an electrical buzz/noise.
Sounds more like plastic vibrating against the door's inner surface... But I don't see a scuff mark or anything giving me a clue as to what it could be !?
I've thought of removing the door panel...then take a test drive without it installed. Just to be sure it is not the the window glass support/channels... door lock/lever mech. rod or loose wiring. But haven't done that as of yet. With the door panel removed... I don't see anything that looks loose or could be causing this rattle/buzzing noise ?
It's difficult to say exactly where this noise is transmitted from... but if I were to guess... I have to think it's possibly near center... around the arm rest area. I see behind that is only some wires coming from the window control unit. But I don't see how those could be culprit of this buzzing noise ?
My '10 is still under the 36K warranty...
View 8 Replies
Advertisement
Last Thursday Nov 22nd, I took my 2010 Corolla for a regular oil change service by an Toyota agent. The service representative recommended to have the brake fluid replace since it had already 39000 km since new. I agreed.
The same evening, I start hearing a strange high pitch noise from the front while braking light at low speed. It does not occur all the time. I did a search in this forum about the brake noise.
That strange high pitch noise could come from the ABS actuator when it activates or modulates at that light braking.
I did a visual check on the bleeding nipples of the brakes today. It seems that the two nipples for rear brake were untouched and this would mean they did not bleed the rear brakes and air could be trapped in the rear brake lines.
Will take the car back the Toyota service. As search from our forum, the cause for the abnormal modulating of the ABS actuator could be :
(a) a bad speed sensor or
(b) air trapped in the brake line.
Since it starts at the same day of replacing the brake fluid, the most likely cause is air trapped in the brake line.
View 2 Replies
Recently purchased my first Toyota, a 2012 Corolla S with 76,000 miles on the ODO. I have a concern about a front end rumbling.
First, the problem...
This "rumble" (the best way I can describe it) starts becoming noticeable around 20-25 mph, depending on the condition of the road I'm on (it could be lower, but I'm in Michigan, all the roads are bad here). This rumble isn't a noise, but more of a low frequency sensation that can be felt in the car and through the steering wheel, and vibrates the rear view mirror. The rumble comes and goes, it isn't constant. Sort of like driving over a rumble strips put on roads before stop signs/intersections, it seems to have an oscillation to it. The rumble intensifies very little with speed. It doesn't seem to oscillate any faster or rumble much harder, it's just there.
Things I've ruled out...
Brakes. When I bought the car, the first thing I noticed was that the front brake rotors were slightly warped, so I installed new rotors and good pads. That didn't get rid of the problem, though I didn't really expect it to.
Tires. The previous owner had seriously over-inflated these tires. Once taken down to their proper pressure, they were noticeably cupped down the middle. These tires were also horribly noisy would not balance, so brand new tires went on (Michelins). The new tires greatly improved the ride, reduced noise, and got rid of a lot of other shakes and vibrations, but the "rumble" remains.
Wheel Bearings. I'm not 100% on this one, but as far as I can tell, it's not the wheel bearings. I've taken the car out on twisty roads and there is no change in the rumble through hard turns, nor any additional vibrations of any kind. Usually bad wheel bearings will exhibit some noise or vibration when being loaded in a turn, but not in this case, so I've ruled them out.
Things I'm not sure about...
CV Joints. I've never had a CV joint go bad or fail on me, so I am unfamiliar with the common signs and symptoms. I have inspected the boots, and they appear to be in good condition and crack free, though that doesn't mean a joint isn't failing. There's no clicking during slow sharp turns, but I think that would only present itself if an outer joint was failing. I'm going to get the car in the air this weekend to do a drain and fill on the tranny (the fluid is getting pretty dark, so I want to get some new in there).
I drove a Ford Focus for the past 10 years and a Ford Contour for 10 years before that, putting over 200,000 miles on both, and never experienced any sort of problem like this.
View 8 Replies
Speaker brackets and bracket preparation.
View 2 Replies
I have a buzzy, vibrating speaker in my right front door. Is the speaker itself shot or is it just loose? Or does the plastic door panel vibrate against the steel door. Placing my hand on the door doesn't seem to reduce noise ( 2010 Corolla )
View 2 Replies
I checked my pads today and noticed that the drivers pad is worn about 50% more than the passenger in the front. What could be the problem??
View 5 Replies
I have a 2009 toyota matrix that as over 140,00 miles when I drive down the road the front passenger side bounces up and down. There is no difference in speed from 25 all the way up to 60 plus.
View 2 Replies
My wife's 2010 Corolla has an issue where the key fob will open the truck and all the doors except the front driver door. Is this a common issue with the Corolla? What are the potential fixes?
View 2 Replies
Background: I brought my R in for service last week because the AC stopped working. I ended up needing the compressor and the fans replaced. I picked my car up and drove it home with no problems. The next day I drove it I started to hear a rather loud buzzing noise that sounded like something was rattling loose from the front passenger side of the car behind the dashboard. It was loud enough to hear over the stereo while driving on the freeway.
Thinking something was wrong with the newly installed fans I brought the car back to the dealership and now they're telling me the fuel pump needs to be replaced. From what I understand, the fuel pump is in the back of the car under the rear seats and attached to the gas tank. I explained to them that I'm a bit confused because the sound is clearly coming from the front of the car but the mechanic there insists what I'm hearing is the fuel pump. Am I crazy or does what they're saying sound reasonable?
I tried looking at a couple YouTube videos that had sound of a VR6 fuel pump gone bad but the sound was nothing like what I was hearing.
View 2 Replies
I had two 12" subs running in my 09 corolla. The front right door speaker and little tweeter speaker stopped working so I took the subs out. I figured the speaker was blown so I ordered new ones. When I installed the new door speakers, they didn't work.
I know for a fact it is not the speaker that's faulty because I tried them on the driver- side door and they worked. So my passenger side door and tweeter speakers aren't working. Do I need to order a new tweeter speaker as well? Like does the tweeter need to be working for the door speaker to work? And vice-versa?
View 1 Replies
ok so i noticed recently that there was this humming noise coming the rear right passenger side everytime i accelerated up to 30mph. the noise would get louder the faster i go. i got it checked by a shop and they told me that it had something to do with my wheel bearing. my car is lowered on coil covers and I have negative camber on my wheels. Why its making this humming noise or if its because i never got my alignments. I am thinking of throwing my stock suspension back in and letting the dealership deal with it since my car is still under warranty.
View 14 Replies
Occasionally, when I play songs, I hear my speakers kind of buzzing, where they sound like they are going bad.
Its super annoying, but I can't think how to replicate it. Any way to show them or what should I do?
My warranty would cover this, right?
Also, if I have installed footwell LEDs, might they argue about that effecting my warranty or anything?
View 5 Replies
I have a 2009 Corolla S and the symptoms are as follows:
1. Normal forward driving, brakes work fine (and as expected without sound).
2. In reverse, when I apply the brakes I hear a click (clunk) sound from the front brakes. It only makes the sound when I'm going from moving to stopping (IE: I cant just keep pressing the brake once stopped to generate the noise). But if I let myself continue in reverse and press pedal again, it will make the same sound (very repeatable). I don't need to go forward to replicate the sound, I can just stay in reverse, stop (CLICK), continue in reverse, stop (CLICK), etc.
3. The it's noticable in the pedal. I can feel it on the brake with my foot when the noise happens.
4. It happens when I depress the brake pedal about 1/4 down, a gentle stop. And usually happens every time when I back out of my driveway or parking spot.
5. GF's sister's 2009 corolla CE does NOT make this noise in reverse.
6. 20,000 miles, Orig tires/brakes, didn't happen 4ish months ago.
I plan on putting winter tires on next month. Perhaps I'll take a look at the pads to make sure they aren't moving around, but wouldn't I also hear the noise in forward motion? Or when I switch from forward to reverse?
View 13 Replies
We added a 2011 Cor LE auto tranny to our 2005 LE.....like it a lot but for one issue. I didn't notice it test driving it (I was far more worried about the pedal locations and the electronic steering) but now I feel it a lot more.
Around 2900-3100rpm there is a buzzing feeling through the pedals/steering wheel. You notice it a lot more going up hills. The dealer noticed it too and is contacting "TAS" to see what they think.
What I'm wondering is if this is just a normal engine harmonic deal and it is what it is? I test drove other models (Civic,Focus,Elantra) and I didn't notice them having it.
View 4 Replies
I have a 2009 Toyota Corolla and it's making a loud grinding metallic noise on the front left side. It does it while I drive the faster I go the louder it gets. When I turn to the left it makes it louder, when I turn right the noise decreases. PG&E have been breaking the roads by where I live and there's a lot of little rocks I drive thru. I'm wondering if that's the problem?? What do I do?
View 4 Replies
My wife's 2009 Corolla S has 107,000 miles. Early on it developed a low idle and vibration while stopped at a light. It was idling about 600 rpm after it warmed up. It never stalled but occasionally vibrated. After doing some research I found some were having success cleaning the throttle body and throttle plate. I did that along with changing the spark plugs. At that time I disconnected the battery to reset the computer. She has put about 2,000 miles on it since then and it never idles below 800 rpm. The vibration hasn't been back either.
I believe it was the throttle body/ plate cleaning and disconnecting the battery that resets the computer that fixed it. The plugs still looked good at 105 K miles, but I had new ones so I put them in. I bought a can of Berryman b12 choke & carb cleaner and sprayed a little on the throttle body and plate and then sprayed some on a rag and wiped down the body and plate. It was quite dirty.
View 14 Replies
Basically when the car is in D and when i am stopped with the brakes pressed on at a stop sign or a red light, the car starts vibrating and i can see the the rpm going down and then receiving back up and going down again something when the car is in R. its a 2009 toyota corolla le 90k miles. when the headlights are on, the rpm stays high so the car does not vibrate or anything. other than this the car runs perfectly fine.
View 1 Replies
Recently, my 09 corolla S starts shaking during slow moving . As I accelerate more, it start vibrating at high frequency. And I can hear the sound "kin kin kni.." I checked the tires, they all look fine. It has 60k miles on.
View 2 Replies
year: 2009
miles: 80160
This usually happens when im on the highway i guess because im usually going over 50mph I hear like a loud humming and vibration and if I turn the steering wheel left or right it becomes unbearable, like deafening. What may cause this, im thinking maybe i need an alignment or wheel balancing or just new suspension.
View 2 Replies
2010 Corolla 1.8 automatic. Accelerating at highway speed (2800-3200) rpm a low frequency shudder/vibration is felt in the floorboards. Goes away of you let up off of gas pedal. No vibration at idle, runs fine all other times. Most noticeable when accelerating under load (ie going uphill) and at highway speed. Trans mount visually intact. Ditto engine mounts. Cv axles less than 1 year old no rattle upon shaking.
View 5 Replies
I think I resolved the idle issue on my 2009 Corolla S with 82,500 miles and Automatic Transmission.
Symptoms:
Idled at between 600 and 800 rpms
Annoying vibration in drive and reverse, no vibration in park or neutral
On hard stops, the engine felt like it was going to die
Turning on the a/c would cause the idle to increase to 1000 rpms and the vibration would go away.
At 82,500 miles, I cleaned the throttle body which was extremely dirty.
Process:
Disconnect the positive battery cable
Remove the top of the air box and flex duct going to the throttle body
Disconnect the two coolant lines going to the throttle body, make sure and have a few old bolts to plug the lines so you do not lose too much coolant
Remove the electrical connector to the throttle body
Remove the vacumn line to the valve cover
Remove 2 bolts and 2 nuts (10mm) securing the throttle body to the intake.
The throttle body does not have a gasket, it is an o-ring which should be fine.
Once you have the throttle body off of the engine, clean it thoroughly with Chemtool throttle body cleaner.
The inside of the throttle body and throttle plate should look like shiny milled aluminum. when done.
Spray chemtool into the two ports where the antifreeze lines were connected. If possible use compressed air to blow out these ports.
Clean the inside of the intake and the mesh screen where the throttle body bolts to the intake.
Reassemble, connect the battery, crank the engine and just let it idle for a good 10 minutes
The 2009 Corolla S DOES NOT have a serviceable IAC. It is riveted on to the throttle body. This is why it is important to spray the cleaner in the antifreeze ports in order to clean it. These ports are the antifreeze bypass ports.
View 2 Replies
