Corolla / Matrix 2009-13 :: OEM Base Model Head Unit Front Speakers Stopped Working?
Mar 31, 2016
I have a OEM base model head unit and today both front speakers stopped working out of nowhere I pulled the head unit out to see if everything was plugged in and it all was snug.. I checked all the fuses too. Is there any other way to check to see if its my head unit thats bad or the speakers? And I guess my second question is if I replace my head unit with a aftermarket one do I still need to retain the stock unit? My sunfire had that problem I needed to put my oem radio in the trunk and hook it into my new aftermarket one. I did try adjusting the fade and all the setting too with no luck.
View 3 Replies
Advertisement
So figured out how to put my head unit on my base model PiP into diagnostic mode. I can't disable the reverse beep from this window... is there anything else worthwhile I can do in this mode? Beside accidentally deleting all my destinations that is.
View 12 Replies
A friend of mine is giving away its head unit (it has video) from a toyota tundra 2008, can it be installed without too much trouble on my corolla 2013 L?
View 1 Replies
I had two 12" subs running in my 09 corolla. The front right door speaker and little tweeter speaker stopped working so I took the subs out. I figured the speaker was blown so I ordered new ones. When I installed the new door speakers, they didn't work.
I know for a fact it is not the speaker that's faulty because I tried them on the driver- side door and they worked. So my passenger side door and tweeter speakers aren't working. Do I need to order a new tweeter speaker as well? Like does the tweeter need to be working for the door speaker to work? And vice-versa?
View 1 Replies
I have an '09 Corolla S with the non-JBL sound system, 6 disk in-dash changer and 6 speakers. I am getting no sound from the speakers except a small burst of static when I turn the ignition on and once in a while sporadic static. The Radio is still playing CD's, FM, Etc, but no sound. All fuses are good and the clock works. I disconnected the factory iPod interface and still nothing. I also tried a different aftermarket HU, but still no sound... I'm on the road all the time so I'm over 50,000k and there is no warranty left on the radio. I've also torn the dash out checking wires and connections and can't seem to find anything abnormal.
View 12 Replies
My 2013 corrolla s speakers seem to be malfunctioning.
Symptoms:
50% of the time there is static coming from the front right speaker and all other speakers are mute.
40% of the time there is no sound.
10% of the time the speakers are fine.
Steps taken this far:
Cleaned the ground underneath the battery.
My dad who is a mechanic says possibly a stereo issue while I think it's a connectivity issue. How to diagnose the problem and salvage my speakers.
View 3 Replies
I just purchased a new to me 05.
PO, had a pioneer H/U installed, however the 4 rear speakers have no sound.
The rear of the radio seems to have everything plugged into it correctly.
My steering wheel controls work fine.
I'm guessing the rear volume/controller is canceling out the rear speakers???
If so what can I do to make the speakers play? I don't need the rear control to work.
View 11 Replies
Managed to break loose a corner of the plastic air shield under head lights bracket is broken. Does epoxy repair kits will work ok on this.
View 1 Replies
I remove the radio from my Matrix. When reinstalling the trim, I damaged the left have heater control (the one which controls where the air comes out). I put that back in, now the fan doesn't work. All the push butting on the AC controls light up when I want them to, but the fan doesn't work.
I don't have a repair manual or wiring diagram, but I figure it has to be something really simple. I have looked at the fuses (I think).
View 6 Replies
Was driving the other day then suddenly fog lights stopped working, I changed the bulbs still wont work, so I checked the fuses to make sure all was ok, and everything was perfect. And now I am completely lost, have no clue what to check to make them working..
View 3 Replies
I, like many, have had issues with my aux jack and decided to have it replaced with an aftermarket device. My aftermarket device plugs into the rear of the radio in place of the OEM aux harness. After removed the old OEM aux harness and installed the new one and put everything back together i had a problem.
The new AUX also comes with a USB slot as well and it all works properly, thats not the issue.
The issue is that my keyless remote has intermittently stopped working. I got out to lock the doors with the remote and nothing happened. I had no time to fiddle with it so i locked the doors via the keyhole and left it. The next time to went to my car, i tried to use the keyless and voila it worked! it locked AND unlocked. I was releived that it worked. Unfortunately once i drove and parked and tried to lock again - it didnt work . Needless to say it doesn't always work, ususally if i lock the doors with the key and come back more then 30 minutes, it unlocks keylessly.
The remote LED light turns on when i press any of the buttons so i know the battery is fine. I already opened the remote and confirmed the contacts are working properly. The only thing i haven't tried to do is reprogram the keyless remote (which i dont think is necessary).
Random symptoms - there are 3 circular dials (fan control, fan speed, temperature control) in the centre console. Originally ONLY the center dials LED lights would turn on. Now randomly the 3rd dials LED lights turn on again. I wanna start checking fuses but would like to know where to start.
View 8 Replies
I have a 2009 Matrix. The AC just stopped working as we were going down the road. The voltage at the compressor was 2.6 volts. the same voltage at the HVAC module I don't hear the compressor kick on at all, engine speed doesn't change when the AC button is toggled on and off.
The AC light stays on steady not blinking. I am pretty sure that there is enough refrigerant in the system.
View 4 Replies
I have cd radio and aux all working on my 2010 corolla, the sound do not come from speakers. I tried another radio it works. I tried another stereo with tape in it it doesn't work. I tried my stereo on another car it works. What I don't understand is why only stereo with radio only works but if i have cd or tape player with it don't.
View 9 Replies
What Model Number Automatic Transmission does the 2012 LE have?
When was the first year they used this transmission?
Has this transmission been used in any other cars?
Does it have the reliability record Toyota is known for, or is it too early to tell?
View 4 Replies
I have a 2009 corolla XRS with the JBL speaker package and recently received a new stereo GPS unit from eonon, the GM5169.[URL] Their website says its suppose to work with the model car and year, but did not say anything about not working with the JBL speakers.
When I went to install it yesterday the wiring harness did not match up with the set up that was already in the original stereo. The only one that did connect was the controls for the steering wheel.
View 5 Replies
know where the Oil Pressure Sending Unit is located on a 2011 Corolla. I am planning on taping into that so that I can attach a bypass oil filter that will slow filter the oil down to 2 microns. Although in doing that, I will not ever have to change the oil again, but only change out the filters and top the oil off. I will occasionally need to send in an oil sample to make sure that there is no degradation in the oil.
View 5 Replies
Occasionally, when I play songs, I hear my speakers kind of buzzing, where they sound like they are going bad.
Its super annoying, but I can't think how to replicate it. Any way to show them or what should I do?
My warranty would cover this, right?
Also, if I have installed footwell LEDs, might they argue about that effecting my warranty or anything?
View 5 Replies
Whenever I use the pandora app on the nav system my speakers always make a popping/cracking sound. It's not too loud but it can get a little annoying after a while. I do listen to my music loud but I don't think it's the speakers because when I switch to satellite radio or listen to my iPod, the popping stops.
View 3 Replies
What harnesses or adapters do I need to get my some aftermarket speakers plus my aftermarket subwoofer hooked up. I have a 4 channel for the speakers and a mono for the subwoofer.
Trying to figure out whether to go this route or buy the wiring harnesses and dash kit needed for my old pioneer d3 double din HU and hooking up RCA's that way.
View 2 Replies
The song/radio station will automatically switch on its own randomly without my intervention.
I emailed the company, and they said to have me ground the unit to the chassis (had it grounded to same ground as aftermarket Kenwood radio), which I grounded it to the factory radio bracket screw (didn't change anything). I am using the 8011 Metra harness, which they said works for 2011 Corollas.
They suggested using the harness that comes with the unit (which you would need to splice into factory wires to do, messy, undesirable, did not do).
So far, what I've done was replace JUST the control unit with a new one, and now it is less frequently switching (1-3times every other 45min car ride, as opposed to 1-3times each car ride). So the frequency is much, much less, but still occurring.
The company suggests trying to replace the harness with another 70-8114 harness (have not done).
What else could be the cause? I was thinking about putting aluminum foil over the unit to stop interference. .
View 2 Replies
I have a 2010 Corolla (purchased December of '09) and just recently the radio has started acting up. Since it got cold last year, it seems after long periods with the heater on, the radio unit display will go haywire. Today, the display did the same thing after my car sat in the sun for a couple of hours (and it was pretty warm inside). Obviously it doesn't make any sense to me, but I thought the display was trying to tell me that it's "too hot" Buttons on the unit will intermittently malfunction as well.
For example, hitting "2" will turn the unit off, pressing another preset number will switch the radio from FM to AM. Keeping the unit off while driving doesn't seem to fix the issue - but it does correct itself after a while.
View 4 Replies
