I just got an oil change, and my maintenance light is flashing when I start up. It has about 36 thousand miles on it. I don't know when the previous oil change was before the one I got two weeks ago.I have read about resetting the maintenance light, but this is my first car and I have only had it for about 8 months, so I don't want to ignore a potential issue here.
View 4 RepliesMy daughter has a 2011 corolla and when she first cranks the car the maintenance required light flashes a couple of times and goes out. I think last time I changed her oil, it was steady on. What is causing it to flash?
View 6 Replies2010 Corolla LE ... This started today, on the ride home from work. Mid 50 degrees, light rain, driving down straight road it started. Engine light also on. No mods in car. is this something the dealer has to se, or can I bring it to my own mechanic?
View 1 RepliesI have a 2010 Corolla. The car is flashing the infamous VSC Off, trac, engine light! The car is still has the powertrain warranty. I was wondering if I should take it to a Toyota dealership.
But I read just getting the diagnostic itself is around $100. I don't want to end up paying for that if the repairs end up being something that's not even covered under the warranty.
I am trying to change the color of the light on my dash board and center console from the standard orange to a light blue color. I've tried searching the internet looking for any advice but I haven't come across anything for a 2009 Toyota corolla. I understand that some cars need to have the light bulbs soldered and some can you can change out a colored film. Which of these options applies to my car? If it's the light bulb change then what size and how many. Also, how to take out the instrumental cluster.
View 6 RepliesAfter taking my 2009 Corolla S to the dealer on 4/07 for an oil change, about 4 or 5 days later the check engine light, the traction control light, and the VSC light come on (VSC off blinks). The first day it came on, I took it to autozone to look the code up and they said it was P0353 (issue with ignition coil c I think). I immediately afterwards drove to the dealer to see what they would say. But after parking in their garage speaking with the greeters, they said the light wasnt on, and asked if I wanted to wait the 2 hours to see a tech. So I took it home.
The code came back about 3 days later, and this time there was a slight stall/jolt for about 4 or 5 seconds. This occured on startup and not during driving. After the 4 or 5 seconds of the mild jolting it felt like it was running smooth. I took it home and after leaving it off for about 20 minutes, the light went out again. A couple days later it came back and stayed on over night and was still present when I started it the next day. It went off again later that day.
My question is what could be causing this that might be a simple fix. Do toyota techs check anything with the spark plugs during normal Oil Changes? I know they checked my brakes but Im not a car guy and am not really sure all that they do. Could it be a loose spark plug? Code P0353 coming up sporadically after dealer Oil change. Is there any steps they normally do during the oil change that could be causing this, like leaving a spark plug loose after checking them or something? Would the coil / wiring harness fall under an engine warranty?
Driving home yesterday and my dashboard battery light started flashing intermittently. This morning it came on and won't go off.
So far I have...
1. Tested alternator and battery with a multimeter and the results appear to be within normal ranges.
2. Pulled out the alternator and had it tested. It went through 7 test cycles on the bench and passed all of them.
3. Swapped out the battery with a new one.
4. Checked the charging system fuse.
5. Thoroughly cleaned the battery cables.
6. Cleaned the battery to chassis and engine to chassis ground cables.
The battery light stays on no matter what I do. What am I missing?
I have a 2011 Corolla LE, about 58k miles. The latest work I did was replace the brake pads, rotate the tires and changed the oil a little over 2 weeks ago. Everything was normal so far. Yesterday I drove for about an hour, again everything was fine, but after stopping at a gas station and starting I have several indicator lights come on.
- Slip indicator, flashing
- TRAC OFF, constant
- ABS, flashing
- Electric power steering warning light, flashes but turns off after about 30 seconds.
I tried my OBD scanner with no luck, but figures since there was no Check Engine light.
So basically I woke up one morning, was gonna go to work when I tried to start my corolla nothing happened...tried that couple of times and still nothing ....then couple tries later, you could hear the car try to start but then nothing happens. The check Engine light is on when I try to turn on car
The battery and such seems fine. And I don't recall having any problems before, now even the remote control for the key wont work for the car...
I have a 2013 Corolla with full synthetic (0W-20). The dealer states this type of oil is only changed every 10k miles. I'm used to changing my oil every 3500-5000 mi. I'm not too keen on their recommendations but $70 for an oil change outside of the Toyota Care package is a little steep.
View 14 RepliesI am going to change the coolant in my 2009 corolla 1.8L. The service manual instructions tell me to open the "cylinder block drain cock plug" and I can't find it. The picture in the manual is not very clear, but it points to a spot on the engine just above the throttle body.
View 9 RepliesI have an '09 with 138k miles on it, I was wondering where the PCV Valve is on the 10th gen, and how to remove it to either replace or clean it?
View 11 RepliesSo driving home today cel came on and vsc started flashing.
The codes I got were pretty out there
P0420 - cat converter (this one I did expect)
B0cc0 ???
C3a32 ???
U0a8e ???
B3e1f ???
I'm wondering if this was poor communications between the unichip and ecu? As for the vsc flashing, people complained about this during rain. It is currently raining. But not certain this is the issue.
Speaker brackets and bracket preparation.
View 2 RepliesIs it possible on my new 2012 to change the mileage read out to mpg instead of L/100km?
View 5 RepliesI bought a 2012 Corolla S and I feel that the rear brakes are a little cheap. Has swapping brakes but how?
View 3 RepliesI changed the battery this morning in my 2009 Pontiac Vibe GT with the 2.4 and ended up with a rough idle. I was not having any of these issues before the change. How to adapt the throttle body?
View 2 RepliesMy Abs traction control vsc off (keeps flashing) and brake light went on in my 2010 corolla....
View 2 RepliesI replaced my tail lights tonight once finished I clean up my mess and decide to go grab dinner.
Started the car, VSC flashing along with ABS light on... Did I blow a fuse when I turned the car on from the new tails?
After starting my 09 Camry, the Maintenance light flashes a good 15 times before it turns off. I just started noticing this. I understand all the lights on the dash will flash upon starting the car, a few times, but this is longer than it has done it in the past.
View 10 RepliesMy engine light just went on and the fault codes are:
P0138 -PowerTrain (O2 Sensor Circuit High Voltage Bank 1 Sensor 2)
P0607 - PowerTrain Control Module Performance
I have just bought Denso 234-4305 Rear Sensor but I was wondering if there are any guides to show where it's located?
The only guides I found is for the 9th Gen Corolla.
The Car has 88k miles on it so I guess it's outside the emissions warranty. Thus what is the price of a new ECU just in case that's the problem?