Corolla / Matrix 2009-13 :: Click In Front Wheel?
May 27, 2015
There Is a click in my front wheels that is audible as I slow down. What is going on. nothing else is wrong with the car. I have a 2013 corolla le....
View 3 Replies
May 27, 2015
Advertisement
Corolla / Matrix 2009-13 :: Front Brakes Click / Clunk Noise When In Reverse?
I have a 2009 Corolla S and the symptoms are as follows:
1. Normal forward driving, brakes work fine (and as expected without sound).
2. In reverse, when I apply the brakes I hear a click (clunk) sound from the front brakes. It only makes the sound when I'm going from moving to stopping (IE: I cant just keep pressing the brake once stopped to generate the noise). But if I let myself continue in reverse and press pedal again, it will make the same sound (very repeatable). I don't need to go forward to replicate the sound, I can just stay in reverse, stop (CLICK), continue in reverse, stop (CLICK), etc.
3. The it's noticable in the pedal. I can feel it on the brake with my foot when the noise happens.
4. It happens when I depress the brake pedal about 1/4 down, a gentle stop. And usually happens every time when I back out of my driveway or parking spot.
5. GF's sister's 2009 corolla CE does NOT make this noise in reverse.
6. 20,000 miles, Orig tires/brakes, didn't happen 4ish months ago.
I plan on putting winter tires on next month. Perhaps I'll take a look at the pads to make sure they aren't moving around, but wouldn't I also hear the noise in forward motion? Or when I switch from forward to reverse?
Corolla / Matrix 2009-13 :: Front Wheel Hum At High Speed
I have a 2010 Corolla with 32K miles and I hear this humming or low groaning rotational noise that seems to get louder with faster speeds over 40 mph. If I turn to the right above 40MPH around a curve in the road, I hear it a lot louder and it oscillates in and out. What it is? I had it checked at the Toyota dealer and they said there was no issue with the wheel bearing but since the noise is still there today, I think I have to take it back. Is this something I could troubleshoot with the car parked?
View 14 RepliesCorolla / Matrix 2009-13 :: Clutch Click When Engage?
Have a click when the clutch engages? Manual transmission.
Everytime is release the clutch, I hear the clutch click when it grabs. It's not the pedal that clicks. It's inside the transmission.
It runs fine, and it's been doing it right off the lot. It's not that loud to actually bother me, I'm just wondering if its normal.
Corolla / Matrix 2009-13 :: Unusual Rumble Or Grinding Sound Coming From Driver Side Front Wheel Well
I noticed while driving my car there was a unusual rumble or grinding sound coming from my drivers side front wheel well. I get out and look I see a bunch of Fluid all over my wheel well. I look around turn my wheel around and see this fluids all on my rotors and suspension. Ive noticed couple weeks back the boots on the struts were ripped in two pieces from deteriorating or dry rotting (this was on both sides) and ive also been hearing some odd squeaking sound for over 15k miles every once in a while going over big bumps or train tracks. Struts go out at only 80k miles on their corolla? Yeah struts do usually lose their life around 60-80k miles but I've never seen them leak around that many miles. Is this a common issue?
View 5 RepliesCorolla / Matrix 2009-13 :: 2010 LE Making Click Noise While Steering
Our 2010 LE has been making a noise while steering. When you steer it left and right, it clicks. Regardless of whether the vehicle is moving or not, it still clicks. It sounds like its coming from under the upper steering column cover behind the steering wheel.
View 1 RepliesCorolla / Matrix 2009-13 :: 2012 Wiper Make A Click Sound Before / After It Moves
I bought a new 2012 corolla a month ago and when the wiper is on the intermittent mode, the wipers make a click sound before it moves and then another click sound after it moves. I still can hear it half of the time with music on (only when the music Is quieter.
I listened to my friend's 2010 corolla and his car had a very faint click. I drove many other cars before and never had this sound. Is this a known sound for corolla?
Corolla / Matrix 2009-13 :: Steering Wheel Shimmy From About 30 Mph Or Up
My wife's Corolla has 71k on it. She recently had tires put on, and now she has a shimmy from about 30mph on up. It seems worst at 60-65. In all of my years, this is a classic example of a tire(s) out of balance.
I've taken it back to the shop that replaced the tires twice to make sure they're balanced, and then took it to a second shop to be certain that the first shop was on the up and up and actually balanced the tires. Everything checks out as being balanced.
Another possible cause could be a bad/worn out axle. The whole front suspension was rebuilt 9,000 miles ago. Everything checks out and there are no leaks anywhere. So that rules that this as well.
What else could it be? Is it possible that one (or more) of the new tires are out of round? Maybe a bent rim? But is seems awfully coincidental that this only started happening after the tires were replaced. What might be the cause of this mystery shimmy?
Corolla / Matrix 2009-13 :: Steering Wheel Vibrating Over 70mph?
So what is the deal with this whole steering wheel vibrating over 70mph? I have new balanced tires and the alignment has been done already. The steering wheel has a very annoying mild shake over 70mph on the highway. When I went back to the tire shop I saw the guy rebalance all 4 tires correctly. They told me to look into getting all alignment done. The car has 123,000 miles and had the 2 front struts replaced at 83,000 miles.
View 6 RepliesCorolla / Matrix 2009-13 :: How To Remove Trim On Steering Wheel
How do you remove the trim on the steering wheel ? I want to wrap it with carbon fiber ...
View 2 RepliesCorolla / Matrix 2009-13 :: MPG Calculator On Top Of Steering Wheel Column
I saw some pics of MPG calculator right on top of the steering wheel column. It was black and believe it displayed 2 sets of numbers.
View 5 RepliesCorolla / Matrix 2009-13 :: Rear Wheel Stud Broken - How To Replace
I broke one of my rear studs off today when I was putting my wheel back on. The rest seem okay, but I'm wondering how difficult it is to replace them? Is it as simple as hammering the broken one out and replacing it with a new one? I don't have to take the drum off, right?
View 2 RepliesCorolla / Matrix 2009-13 :: Beep Coming From Dash Near The Steering Wheel
I've got a 2009 Corolla LE. Everything is factory, no remote start, alarm or rust module.. It is equipped with smart start and has about 73000km on the vehicle.
The beep is rather loud, louder than seatbelt and seems to be coming from dash near the steering wheel. I have disconnected the battery hoping to reset something but the darn thing keeps beeping every 30 seconds even while it's disconnected!
Strangely enough I haven't found much on this it must be a very uncommon problem.
Corolla / Matrix 2009-13 :: Wheel Spacer Installed - When Accelerate Car Pulls To Right
I just installed some 20mm wheel spacers. When I accelerate the car pulls to right!! Experienced this after installing spacers?? Could i have done something wrong??
View 4 RepliesCorolla / Matrix 2009-13 :: While Shifting Vibrations Through Steering Wheel And Vehicle?
I have a 2009 Corolla LE. I've had these issues since buying the car last year. Issue #1 : when initially accelerating from a stop through 1st and 2nd gears, there's a slight vibration felt through the steering wheel and vehicle. If it's just a gentle acceleration it typically doesn't aggravate the issue as much as a quicker acceleration. Issue #2 : This car is very sensitive to varying types of road conditions. One patch of road can seem smooth as silk. Then another patch will feel rough and bumpy. The road appears to have no bumps or imperfections. I just put brand new tires on the other day, and its still doing this. And I feel all of the road imperfections the most through the steering wheel. I'll briefly take my hands off the steering wheel to see if I feel it in the cabin, and its not as bad as it is through the steering wheel.
View 9 RepliesCorolla / Matrix 2009-13 :: Front End Rumbling / Vibration Around 20 - 25 Mph
Recently purchased my first Toyota, a 2012 Corolla S with 76,000 miles on the ODO. I have a concern about a front end rumbling.
First, the problem...
This "rumble" (the best way I can describe it) starts becoming noticeable around 20-25 mph, depending on the condition of the road I'm on (it could be lower, but I'm in Michigan, all the roads are bad here). This rumble isn't a noise, but more of a low frequency sensation that can be felt in the car and through the steering wheel, and vibrates the rear view mirror. The rumble comes and goes, it isn't constant. Sort of like driving over a rumble strips put on roads before stop signs/intersections, it seems to have an oscillation to it. The rumble intensifies very little with speed. It doesn't seem to oscillate any faster or rumble much harder, it's just there.
Things I've ruled out...
Brakes. When I bought the car, the first thing I noticed was that the front brake rotors were slightly warped, so I installed new rotors and good pads. That didn't get rid of the problem, though I didn't really expect it to.
Tires. The previous owner had seriously over-inflated these tires. Once taken down to their proper pressure, they were noticeably cupped down the middle. These tires were also horribly noisy would not balance, so brand new tires went on (Michelins). The new tires greatly improved the ride, reduced noise, and got rid of a lot of other shakes and vibrations, but the "rumble" remains.
Wheel Bearings. I'm not 100% on this one, but as far as I can tell, it's not the wheel bearings. I've taken the car out on twisty roads and there is no change in the rumble through hard turns, nor any additional vibrations of any kind. Usually bad wheel bearings will exhibit some noise or vibration when being loaded in a turn, but not in this case, so I've ruled them out.
Things I'm not sure about...
CV Joints. I've never had a CV joint go bad or fail on me, so I am unfamiliar with the common signs and symptoms. I have inspected the boots, and they appear to be in good condition and crack free, though that doesn't mean a joint isn't failing. There's no clicking during slow sharp turns, but I think that would only present itself if an outer joint was failing. I'm going to get the car in the air this weekend to do a drain and fill on the tranny (the fluid is getting pretty dark, so I want to get some new in there).
I drove a Ford Focus for the past 10 years and a Ford Contour for 10 years before that, putting over 200,000 miles on both, and never experienced any sort of problem like this.
Corolla / Matrix 2009-13 :: Replacing Both Front CV Axles
My Axles started to make noises couple months ago While making Sharp turns. I bought some new axles for the front, but this will be my first time replacing CV Axles.
Any tips and or recommendations on what to do and not do, and tools to use? I watched a couple Youtube videos already. I plan on changing them out this weekend.
Corolla / Matrix 2009-13 :: 2010 S - Leather On Steering Wheel Flaking And Peeling
As the title says, the leather on my 2010 S steering wheel is flaking and peeling. There was a bad spot in the leather of the original wheel at the 12 o'clock position when I took delivery. The dealership replaced it and now the new wheel is doing the exact same thing in a different spot. It is from the 7 to 9 o'clock position. Nothing rubs in this area, I do not put my hand in this area, I don't wear anything sharp on my hands like rings and there is no way my skin is rough enough to shred leather so I am assuming it is some sort of defect in the material.
View 11 RepliesCorolla / Matrix 2009-13 :: Keep Steering Wheel Centered Car Just Bounces Around Lane From Left To Right
I have 2010 Corolla S with manual transmission and ever since I bought this car I've been having issues with it's steering especially on the highway between 60-70 mph when the behavior is the worst.
The car is really hard to keep inline and even though I try to keep the steering wheel centered the car just bounces around the lane from left to right. I'm sure most of you know what I'm referring to.Now, I involved my dealer into this problem few months ago and the service manager (when I pressed him during the test drive) kind of admitted that he knows what I mean but he can't do anything about it until Toyota Corporate issues an official fix to it.
Surprise surprise, I just found TSB-014010 (URL...) last week online which seems to be the fix I'm looking for and based on the comments on this forum and edmunds.com it seems to either fix completely or mostly fix the issue for the people who had it done already.
However when trying to show this TSB to my dealer's service (the same service manager as before) and schedule the appoitment I notice that they are very defensive about it and try to dismiss my claims with statements like: "they all drive like that" or "it may be tire preasure" or "based on the description that you gave us and the TSB it's not the same issue" .
Corolla / Matrix 2009-13 :: Airbag Removal To Change Steering Wheel Lights
I'm trying to remove the airbag so I can get to the steering wheel lights to change them. I took the covers off of each side of the steering wheel, expecting to find T30 torx screws to take off so that I can remove the airbag, but there seem to be no screws at all holding it in! Am I missing something here? Will have pictures in a couple minutes.
Not sure why my pictures aren't working, here are the links :
[URL] ....
[URL] ....
Corolla / Matrix 2009-13 :: 2011 - ASWC Steering Wheel Control Unit?
The song/radio station will automatically switch on its own randomly without my intervention.
I emailed the company, and they said to have me ground the unit to the chassis (had it grounded to same ground as aftermarket Kenwood radio), which I grounded it to the factory radio bracket screw (didn't change anything). I am using the 8011 Metra harness, which they said works for 2011 Corollas.
They suggested using the harness that comes with the unit (which you would need to splice into factory wires to do, messy, undesirable, did not do).
So far, what I've done was replace JUST the control unit with a new one, and now it is less frequently switching (1-3times every other 45min car ride, as opposed to 1-3times each car ride). So the frequency is much, much less, but still occurring.
The company suggests trying to replace the harness with another 70-8114 harness (have not done).
What else could be the cause? I was thinking about putting aluminum foil over the unit to stop interference. .