We have a 2009 Matrix, 68000 miles. automatic transmission has a loud clunk when down shifting on a hill. Has only happened a few times and cant seem to make it happen. Am really concerned what this might be.
View 5 RepliesI have 2009 Corolla XRS 5 speed automatic. I have 10,500 miles on it and I have had this transmission issue since I got the car. At times, while accelerating onto highways the car does not downshift. The car stays in 3rd gear up until 4,000 RPM. I can shift it by putting it in sport mode and shifting manually. It only does it sometimes but it does not seem normal.
Took it for my 1st service visit dealer said no codes came up on the computer and maybe it needed to be broken in. Went for 2nd service dealer told me no codes and no problems. I then wrote a letter to Toyota under the lemon law since it had 2 failed attempts at fixing it. They contacted me and said this may be normal. I do not see how it is normal.
Is it because it is a four cylinder that it has these problems? Usually it shifts correctly but I feel there is a defect but they said the computer would have codes stating problems and it does not.
I have a 2010 LE with auto trans. This happens when I start the car first time in the day. I shift it to drive And it takes maybe 1.5 seconds to catch before I can drive it. Is this normal. Would a fluid change fix it?
View 11 RepliesI have a 2010 corolla le with approx 54k miles. Should I have the trans serviced/flushed? Can I just do a drain and refill? Is it true that replacing the fluid will cause the trans to fail later on?
View 1 RepliesCar - 2011 Corolla S - Auto Transmission
My transmission seems to slip when it is shifting from 3rd into 4th. The second that it shifts into 3rd gear the rpm drops and shifts into 4th (This is when i have light to medium pressure on the pedal). If i push the pedal down 3/4 of the way once the transmission shifts into third then the rpm rise for at least 4-5 seconds (which seems more normal). In addition the shifts are a bit rough when the transmission is shifting up or down.I am looking for some insight before having a dealership jerk me around.
I just bought a 2013 Barcelona Red Corolla S in Manual transmission. Already, I've noticed how rough the transmission is when I shift. But it's only roughy when I first step on the clutch. But if I keep the clutch pedal down, all the gears shift smoothly, until I release the clutch and press it down again, then the first shift is really rough. Especially REVERSE, when I shift into reverse, it's so rough that it shakes the car. There's no grind, just very rough. It sounds like someone cocked a shotgun. Everything is smooth when driving tho, only happens at full stop.
View 14 RepliesHow to disable the auto door locks but I have the opposite problem. Mine were not enabled and I would like them to be. Looking for instructions for enabling the auto door locks? 2010 s, no smart key, manual transmission.
View 14 RepliesOn older cars I've owned, this has never happened. But ever since day 1, my car has been jolting everytime I shift from P to R. (Yes I'm backing out). Is this normal? If not, what should I do?
View 1 RepliesWhy does the automatic transmission stay in 3rd gear and not shift into overdrive until it gets warmed up? It is so annoying. This is the only car that has ever done this. Even the camry I don't think does this. Especially the fact that the rpms stay above 1k rpm until the engine is warmed up.
View 7 RepliesThe transmission is shifting extremely hard when it downshifts to make a pass.
Any other time it shifts fine, this is the only scenario it happens in.
It is pretty violent, shifting with a bang.
It is a 2010 corolla, auto, with 70k miles, I have never changed the fluid, and I don't think it has anything to do with it.
The tech said it might be the battery, as it was going bad. I put a new battery in, and it didn't seem to do it for two weeks or so, but is now back doing it again.
My Mother just purchased a 2012 Corolla LE and this thing doesn't have the auto on/off for the headlights on the switch..
How to install the auto switch from a 2010 or if it will even fit and function?
just got my new 2012 Corolla S AUTOMATIC and want to see if this knob will fit my shifter. Any tips on removing the OEM auto shift knob? URL...
View 5 RepliesI have a toyota corolla 2011 and I dont remember when window auto down stopped working or if it worked at all. I never disconnected the battery, not sure about if the dealer has done it after I took it for service before. Or maybe the auto down is fake?
View 5 RepliesIs it possible to reset or shut off the auto door locks?
When I use my use my factory remote to unlock the doors it usually locks itself within one second. If it don't time it right I'm pressing that button repeatedly trying to open the door. This is such a pain and it's annoying. Sometimes when I go to open the door so that I can exit the vehicle it locks itself midway me opening the door so that I'm stuck.
I called the dealer and shocker they want me to come in so that I can get screwed. There must be a way to just reset or reprogram this.
I have searched I have seen threads concerning the locking when you shift out of park. I am asking about just locking and unlocking the car.
Is there a way to disable to auto lock on these cars? When I put my car in park it unlocks it for me. Locking it is kinda cool, but not unlocking it. I had a situation a few days ago where I was sitting in a parking lot waiting for my girlfriend to get out of the store when a guy opened my door and tried to get in. He realized that he opened the wrong car door. I really do not want this type of situation to happen again due to the fact that I carry every single day. So, is there a way to disable the auto-lock "safety feature".
View 3 Replies2011 Corolla S 1.8L 4 speed a/t
I have noticed that when my car shifts from second into third gear at around 50 km/hr that the rpm drops twice. It shifts (almost seemingly to a 2.5 gear) and the rpm drops and then a second later it's like it shifts again and the rpm drops again, is this torque converter lock up I am experiencing?
This also usually happens when I give it light throttle and not when I am heavily accelerating.
I have a 2010 S with an auto trans and 68,000 miles. I've never replaced the fluid or filter. Over the last 10,000 miles or so, I've noticed the following in regards to shifting.
I will being on a merge ramp to the highway rolling along and waiting to pull out into the flow of traffic. I'll be traveling along at a constant speed, say 30 mph, with constant pressure on the throttle waiting for my opening in traffic. I will see my opening and floor it. That's when (sometimes) the car seems to get very confused. It doesn't shift back right away, it lingers in 3rd (or OD) and picks up a tiny bit of speed. Then, it hesitates with no acceleration, and then roughly shifts to 2nd or 1st. It feels more like it forces itself into gear and, once in gear, it accelerates like it should.
The biggest issue for me is that this whole process takes about 3 or 4 seconds. That's not very long, but when you're trying to merge onto the highway or cut into traffic, 3 seconds is the difference between being safe and a close call.
Transmission fluid appears to be full, is a nice red color, and doesn't smell burnt.
My 2010 Corolla S used to always lock itself after I parked my car and left it idle for a moment or so. For instance, when I walk away from my car after parking it would auto-lock the doors. Now when I leave it, the doors remained unlock and I have to lock it myself each time. How to change it back somehow? I want to set it back in-case I ever do forget to lock it manually, it could save a lot of hassles.
View 14 RepliesI have a 2009 Corolla S and the symptoms are as follows:
1. Normal forward driving, brakes work fine (and as expected without sound).
2. In reverse, when I apply the brakes I hear a click (clunk) sound from the front brakes. It only makes the sound when I'm going from moving to stopping (IE: I cant just keep pressing the brake once stopped to generate the noise). But if I let myself continue in reverse and press pedal again, it will make the same sound (very repeatable). I don't need to go forward to replicate the sound, I can just stay in reverse, stop (CLICK), continue in reverse, stop (CLICK), etc.
3. The it's noticable in the pedal. I can feel it on the brake with my foot when the noise happens.
4. It happens when I depress the brake pedal about 1/4 down, a gentle stop. And usually happens every time when I back out of my driveway or parking spot.
5. GF's sister's 2009 corolla CE does NOT make this noise in reverse.
6. 20,000 miles, Orig tires/brakes, didn't happen 4ish months ago.
I plan on putting winter tires on next month. Perhaps I'll take a look at the pads to make sure they aren't moving around, but wouldn't I also hear the noise in forward motion? Or when I switch from forward to reverse?
I have a 2011 Corolla S Automatic with approx. 22,000 miles. This winter it is not wanting to shift from 3rd to 4th gear when it's cold (35 degrees F or lower). After I've driven about 1/2 to 3/4 mile it will finally upshift. It did not do this last winter.
View 7 RepliesI currently own a Toyota Corolla VVTI 1.8 2009 GLI. I have been racing this car here at our auto drome for over a year. Last race it starting giving me real bad issues with shifting on the track. I can be a 5,900 RPM and shift to a higher gear and the car will choke and drown and it takes forever to recognize I'm accelerating. I know this is because of the computer and the electronic accelerator it comes with ( I can't remember it's name in English). My gas pedal is Denso and I understand there is an adaption that can be done to the cable to trick the computer.
View 14 Replies