Corolla :: 1996 DX Stay Stuck At High RPMs Without Changing Gears
Sep 7, 2015
I own a 1996 Corolla DX with an auto transmission which has a few issues I would like to fix. The biggest issue is that sometimes it stays stuck at high RPMs (somewhere near 3,100) without changing gears which makes me have to give it some extra torque momentarily to change gear and drive at normal RPMs. But sometimes it does the opposite, when slowing down it sometimes stays at a higher gear and won't change to a lower gear until I've slowed down almost to a stop.
Another issue is that it is very slow to accelerate, it just feels real heavy and I regularly have to give it a lot of torque just to be at equal speed with the rest of the cars on the road, does this have a fix? Other than that there isn't any major issue that I actually know about, for this reason I'd like to know what place you would recommend me taking my car to get a full checkup to find any issues I don't know about.
View 2 Replies
Advertisement
RPMs fluctuate from very high to very low without me doing anything. It doesn't do it all the time, so far its happened 4-5 times in the past 3 days. I first noticed it when driving, I took my foot off the gas to break and it started doing it and once I hit the gas it stopped. It seems to be getting worse because today I put it in the park and when it should have jumped into idle it started and even when I hit the gas it didn't stop. Like I said the RPMs fluctuate from very high to very low in a few seconds regular intervals.
View 2 Replies
I drive a 1998 B5 1.8T passat. This happens when i go up a hill, i mean i can go up the hill fine but then when I go straight my rpms go crazy before changing gears, idk if this is normal but I doubt it.
View 9 Replies
I have a squeak when I change gears, especially from 1st to 2nd. I have a twm short shifter with bronze cable bushings. My first thought was that the bronze bushings were causing the squeak, but I eventually narrowed it down to the shaft that comes out of the back of the transmission with the weight bolted on it (not sure what it's called). I took out the intake filter box so I could get at it and confirm that it was where the squeaking was coming from. That's definitely where it was coming from so I pulled back the boot seal and greased the shaft with some white lithium grease. That has worked a bit, but the squeak is still there.
View 8 Replies
I took my car to a shop today to have some engine stuff checked out. One of the mechanics noticed the vacuum levels would drop to 28-30 hg when changing gears or going into neutral. Is this normal?
View 2 Replies
2002 Ford Escape. My car was sitting for a week in cold weather. I started it yesterday with no problem, but only waited for a minute or two before driving. I was driving at city speeds, and heard a knock. I was accelerating up a hill and it hesitated/ jerked once or twice. The check engine light came on, and now it knocks every few seconds when I am stopped at a light. It also doesn't seem to catch the highest gear (5?) when it shifts, making a constant knocking sound and vibrating. Letting go of the gas or accelerating so it shifts back down makes the noise go away. In other gears it seems fine, with an occasional jump... It is an Automatic V6. I am taking the car in Monday, but I would like to know possible causes.
This morning I let my car warm up for 40 minutes (15 minutes in park and 25 idling at the bus stop). The problem was no better. By knock I meant it feels like someone bumped the engine. My foot vibrates on the brake for a second. And when it changes into the highest gear, it shudders ( until I release or further press the gas pedal. The revs don't change while it is shuddering or knocking.
View 3 Replies
I have a 1994 Toyota Camry. Took it to a shop to repair an oil leak. They had to dismount the transmission to get to the gasket. I got the car back and the transmission was messed up. Took it to a transmission shop and they told me that the transmission "cable" wasn't positioned correctly by whoever had done the work and they could fix it. They told me it was safe to drive it until my appointment. The engine was revving too high before changing gears and while driving home, I heard a loud rattling noise in the engine and my car stopped in the middle of the road. I'm told that a rod has broken inside the engine. My question is: can this in any way be related to the transmission cable not having been set/positioned correctly?
View 5 Replies
I have a 96 Rav4. When I am driving on the freeway it will get stuck at 3000 RPMs for a good 20 miles. It doesn't do it all the time, but it does it a lot. The car will only be going 50 mph, but its stuck at high RPMs. The mechanic has no idea what is going on.
View 5 Replies
I have a golf mk4 1.8T AGU, about one week after i had my k04-023 turbo on and all the Stuff that comes along it started "stall" (don't know if its the right word??) in the High gears, most 5th gear but it first start doing it when i hit boost (3000rpm)
I runs on Stock n75 valve.. I though i could be a boost problem, maybe the Stock system cant handle it? I did install a boost gauge to see if it was the was the problem, and it dont Seem like it. In first it runs from 1.4 bar and drops to 1.2. Same in second and third. But in 4 and 5th it goes to 1.7 bar and drops to 1.4.. I did wonder it maybe the n75 valve cant handle 1.7 bar??
View 5 Replies
1999 ranger, 2.55 speed. truck idles with very high rpm's when driving and shifting gears. have changed the AIC, mass air sensor. Throttle position sensor and still does it. the AIC has been changed 5-6 times in 6-8 months as parts store kept telling me it was that. What can i look at, check, etc...
View 6 Replies
Baffled that my well-maintained 05 Corolla couldn't smog today. Smog checker said rpms were too high and it got kicked off the machine six times; said he had replaced his cable today. Manual transmission, 96,000 miles and had oil change last week; 93,000 major service included flush of something.
View 3 Replies
I'm new to owning a Toyota. I just financed a 2010 black Toyota corolla S with 36 miles on it from a local dealership after i decided my last car was pretty much a money pit (2001 expedition)...blew the head gaskets, then after that was fixed developed a bad knock...anyhow i just decided i was overdue for a new car. Its a 5 speed manual and at highway speeds (65-70mph) I've noticed the rpms are bit high...like around 3grand. Is that normal? Just seemed really high to me, I really think this car would do great with a 6 speed. Also is the corolla governed? I was on a long stretch of road and i quickly got to 110ish with no sign of a governor kicking in...?
View 14 Replies
Noticed this morning I was idling at 1000 rpms and was wondering if that's normal or a little high?
View 5 Replies
1996 Ranger 2.3 140 CID XLT 126,000 Miles. When coming to a stoplight or stopping the engine idle is low and causing engine to almost die. Engine has been stuck at high idle a couple of times. It started with the engine idle slowly coming down and now it its too low. I suspect the Idle air control valve.
View 1 Replies
I have an early model year 2004 Touareg which has lately developed what appears to be a slipping problem when changing gears from 5th to 4th when decelerating or the same when accelerating strongly and downshifting. When switching over to tiptronic mode, its not clear if that apparent slipping goes away or changes. It definitely isn't as severe but that could be due to perception or the RPMs where the shifting is occurring.
The only real interesting characteristic of this clunk and lurch that is experienced is that it only happens when the car is warm -- I've been watching the transmission oil temperature, and it appears to start happening as it passes through 200 degrees. When it starts, the lurch/clunk is small and not too bad. As the car reaches temperature, it reaches if full lurch/clunk potential.
I have taken it to the dealer once and they have "upgraded software" that was supposed to clear up the problem, but did not.
View 7 Replies
About twice a year I am noting a too soon change of gears on automatic mode. This may be the fourth time it happens is just coming and going by itself.
I notice that when driving on constant traffic and going about 40mph I'm doing 5th gear so when traffic clears up I have to really step on the gas so car downgrades to catch up with traffic. What may be happening?
View 7 Replies
My wife always chastises me for not coming to a complete stop from backing up before I shift the car into drive. I do not shift when the car is still moving more than 1-2 MPH, in fact it is barely moving when I change gears. My wife insists that I come to a complete stop and wait 1-2 seconds before shifting from reverse to drive. She is convinced that I am doing damage to the transmission the way I shift. I insist that no damage is being done and point out that with over 100,000 miles there have been no transmission problems with the car. Am I damaging the transmission by shifting before I come to a complete stop in reverse?
View 9 Replies
I have a 2002 Impreza Outback Sport. Since moving to Tucson, AZ, from Flagstaff, AZ, the car jumps when changing gears (I have a manual) as if I was back in the day of learning how to drive a stick shift. This only happens in the summer, when temperatures get up to 110. Also, the idle is very rough and the car almost stalls when stopping quickly (this is infrequent). What's happening with my car?
View 2 Replies
My 2002 Dodge Grand Caravan transmission suddenly does not changing in gear This happened when I was driving. The engine light came one and transmission seems to stuck in a gear. Acceleration is fine but the van slows down quickly if I let go the gas pedal. Seems like it stuck in a gear. How to I troubleshoot and is there anything I can do at home?
View 19 Replies
Bought a 2009 Chevy HHR with 35,000 miles in July, 2010. In the summer of 2011 the ignition was replaced, as the key would not turn. (The engine was running at the time. It was necessary to disconnect the battery to turn off the engine.) At 55,000 miles the transmission suffered "catastrophic failure" and the entire transmission assembly was replaced. (The engine light never came on, although the transmission was slipping frequently.) After driving the car with the new transmission between 100 and 200 miles, the engine light came on. The error code indicated a faulty transmission fluid pressure switch. The transmission changed gears harshly at times and the automatic door locks stopped working properly. Sometimes they would lock when the car was taken out of "park" and sometimes not. Likewise, they would not always unlock when the transmission was put in "park." After replacing the switch, the technician said that for no reason the security light came on briefly as did the passenger airbag "on" indicator light. Once again, after having driven between 100 and 200 miles, the engine light is on again, and gears are sometimes changing harshly. No diagnosis yet. Do I need an exorcist?
View 7 Replies
I own a 2000 Jetta auto with 200k on it. I have the same problem. It wouldn't change gears till 4000 rpm i scanned it. And got the cods g38 and g68. So I changed both. It was working fine then again same thing it works then stop works. So scanned it again and got same codes changed them again worked fine then stopped working so I took it to vw and they told me same thing same sensors and the wire harness so I changed them again got the parts from VW this time. It was working then stopped. And when I turn on the car and drive my gear box display goes all black for at least 10 min driving then goes back to normal. But sill doesn't change gears. Now not even after 4000 rpm. Ps. When I do it manual 1st gear 2 and changes fine once I put it on drive doesn't not change gears.
View 7 Replies
