Corolla :: 1994 Toyota Won't Start?
Sep 18, 2015
I have a 1994 Toyota Corolla, automatic transmission. I went to start it this afternoon and it made a clicking sound a few times then went completely dead. When I jumped it, the dashboard panels, radio, lights, doors, etc. began to work, but it still would not start. I have replaced the alternator about 1.5 yrs ago and had the battery checked then too (it was fine then). I have had this problem before about a year ago, but it did start when jumped. I didn't leave my lights on or any doors open, so I don't think I drained the battery.
View 2 Replies
Advertisement
I have recently been having a problem with my Toyota Corolla. It starts up fine in the morning, but after a couple of hours of driving with the A/C on and the running lights (which are always on), and the radio, when I shut the car off, it will not start without a jump. With my heavy duty cables it starts instantly with the jump but then I am afraid to turn it off again. It has a genuine Toyota battery that has the dots removed saying it was installed Dec. 2012 although it looks older. After driving for a couple of hours the battery should be fully charged right? Or, does having the A/C and lights on suck up to much juice?
View 1 Replies
My 1994 Toyota Corolla wagon has a problem. I drove to work, all seemed fine. I jumped in it in the afternoon, and my key won't go in the ignition - it gets half way in, and that's it. It feels like the key is bumping into something into the ignition lock cylinder. In the interest of full disclosure, I've sprayed some WD-40 into the lock cylinder, thinking maybe the pins were jammed. If that is the case, it hasn't worked. Zero improvement. This originally happened when it was really cold out, so I've waited and tried it again on a warm (40 degree) day - no change (though my door lock and ignition have been more stubborn in the cold in the past, but only marginally so). So, what are my options? I guess you can't (easily) replace the lock cylinder without the key in the "on" or "acc" position (which I obviously cannot do). I'm not opposed to using a screwdriver as the key, or hot-wiring the car, but don't want to take drastic (or stupid) steps before being sure I don't have other choices..
View 6 Replies
After a new distributor, check engine light coming on, getting a code 52, they (Toyota Dealership) replaced knock sensor. Unfortunately it seems to improve a little bit, but same issues happen; engine not running smooth at times. 94 Corolla. In the 223,000 mile club. 1.6
View 7 Replies
Periodically my 1994 Toyota Corolla 5-speed manual will not start. Other times it seems to hesitate before starting. The rest of the time it starts fine.
When it does not start: I turn the key, and hear the fuel pump relay click, and hear the fuel pump on the gas tank energize, but the car does not try to crank. I do not know if the starter solenoid is engaging at this time, as I could not listen for it while in the car. When I did try to listen for it while under the hood with someone else starting the car, it actually started (did not exhibit the issue)
When it hesitates before starting: However, sometimes, when I turn the key I hear the fuel pump relay click and the fuel pump energize, after about 1-1/2 seconds of holding the key, it does start.
When it does start it sounds normal, not like a low battery. The battery is new. I had the charging system checked at Advance Auto and they said the battery was good as was the alternator and starter. Plenty of cranking amps.
I disconnected the main wire on the starter motor and cleaned it with a wire brush. I also cleaned up the battery terminals.
I did find that the switch on the clutch pedal that allows the car to start when pressed has some fluid leaking on it (clutch fluid I think). Could that be causing the intermittent starting issue? If so, can I just clean it with WD-40 or something like that?
View 1 Replies
This car was running fine until my daughter brought it to a reputable tire shop to have new tires put on and an alignment done. The day after this was done, she started having issues with the car not wanting to move when it is in drive. It would eventually take off, but very reluctantly, and once she got going down the road it would be fine. After a couple days like this, it just wouldn't go at all in drive unless someone was pushing it. It goes fine in reverse.
The transmission fluid level had been recently checked, and was fine. Now when this problem cropped up and it was checked, the fluid was gone! We don't notice anything on the ground where it has been parked.
View 4 Replies
My 94 Toyota Corolla has about 190,000 miles on it and lately it has had a hard time shifting between 20-30mph. It finally does reach it and does not have trouble shifting at any other speeds. This only happens in the heat of the afternoon (Never have this problem in the morning). Also, my O/D light has been flashing when this happens, or at least around the time it happens. Could these two problems be linked? I took it to my mechanic in the morning and he checked the transmission fluid and it seemed fine, he also had no problems driving around when he tested the car. He said my transmission is going and that I should make "long term" plans. Is there any hope?
View 1 Replies
I have a 220k 1994 Corolla with I have come across a couple problems recently. It all started about a week ago when I decided to change my rear brake shoes. The old ones turned out to be all cracked and everything but were generally in pretty good shape in terms of wear. Anyways I put the new shoes in (my first brake job) and tightened up the e brake cable and went for a test drive. I walked away extremely satisfied, the e brake worked perfect which was my main reason for changing the shoes in the first place.
Basically the whole thing worked perfectly until 2 days later. I was driving for about 8 miles when my brake pedal suddenly fell through to the floor (or pretty close) at first I even thought I hit the clutch pedal! anyways after pumping the pedal a few times my pedal feel returned about 70% and after another maybe 10 seconds braking power was lost again until I pumped the pedal. So lucky for me my destination was a 1/4 mile away so I parked and checked the fluid level; it was at the max mark, then I check the wheels/drums and they were REALLY hot.
Also the driver's side drum had a faint smell of brake fluid. Anyways about an hour later I went for a short drive and the brakes worked fine so an hour after that I drove the 8 miles home and about 1/8 of a mile from home same thing happened; brake pedal basically goes almost down to the floor until pumped. My thoughts were that the new shoes were constantly rubbing and the old fluid overheated and caused failure so I flushed the system and put new fluid in and adjusted the shoes "in" with the click adjuster bolt. I had a really hard time getting the drums of to begin with. That and I loosened the e brake cable just in case.
So the next morning I drive about 5 miles without using the brakes pulled over to check that the drums were not heating up anymore (they weren't) so I thought I had fixed it. Well 3 days later (last night) I was experiencing the rear brake stickiness again. Basically when I was just moving from a stop where I had used the e brake to secure the car, I could literally feel that the rear brakes were stopping the car pretty aggressively and sure enough after a few more miles my brake pedal fell through so I poured water on the drums and they started to let off lots of steam, even after like 10 bottles!
So I limped to my friends house at 12:00 AM and jacked my car for a look. Again the drums really didn't want to come off and once we did get them off my friends dad inspected them and could find anything wrong with my installation. The conclusion that we came to was that the auto adjustor for the shoes makes the shoes too tight and they rub. So I am thinking maybe this is cause for the fluid to overheat and boil, causing the pedal to fall through. The pedal fell has gotten much worse since I bled the system 3 days ago so that may be an indicator. Did a test this morning for 5 miles and the drums were just below lukewarm.
View 1 Replies
My 1994 Toyota Corolla's speedometer just stopped working while I was driving this morning. Does this mean that there could be something worse going on than just my speedometer?
View 4 Replies
My 1994 Toyota Corolla idles at around 1500 and 2000 RPM just about anytime I drive it.
It is worst when I first start the car, and it gets better the longer I drive, however, it is still well above a normal idling range!!
I add oil regularly and do check the levels on most of my fluids on a weekly basis!
View 4 Replies
In Jan my 94 Toyota Camry started having issues with starting- for instance, I would run an errand for 10 minutes get back in the car and it wouldn't start. However, this tended to be random. When this problem happened more often I took it in and they said I needed a new starter so I got one (Feb) and didn't have any issues for a month, but then began to have the same issue on and off again. I took my car back in for the second time and they said it must have been a bad starter. They gave me ANOTHER new starter (Apr) and my issues continued soon after. I took it back in and they didn't have an answer for me other than the starter was good. Took it to another mechanic and he had the car for two days and could not find ANY ISSUE with the car. I let it brush over during the summer months because I never had this issue (June-Aug) and now that it's gotten cold again I'm having this problem.
Few things to note: -Anytime I have this issue I'll hit the starter with a hammer and it will ALWAYS start. This has been the case since January.-It ALWAYS starts in the morning and when I get back in my car after working all day. However, if I were to run errands in the morning or at night it would not start with the stop and go. -This only happens in the cold months -They tested the newest starter and they say there's nothing wrong with it.-Within the past two years I've had MANY things replaced on this car and any shops I've taken it to say it's a great car with no issues they can find.
View 10 Replies
My 94 truck (Toyota 6 cylinder 3VZ engine) is currently idling at ~2000 when I first start the engine. After warming up or driving for a substantial amount of time, this eventually drops to ~1000-1100. I had the throttle body removed and cleaned (twice). This stopped some up-and-down revving which was happening, but not the high idling. This is a relatively recent development, and I've gone to 3 mechanics AND the dealer, all of whom say, 'it's fine'. They say it should run 'a little higher when it's cold'.
I think some of these assessments were based on the simple lack of engine error messages (no codes from the computer = no problem). I admit that I'm no expert, but I've had the truck for a decade; I know what's 'fine' and what's not. The usual idle was ~800 (in agreement with specs) and I've driven this truck in temps down to -30F. It has never idled this high before. Since it gets close to normal RPMs after warming up, I don't want to turn the idle adjustment down. I moved from a very cold, very dry climate at 6000 ft to a very wet, moderately cold climate at sea level - is there some other adjustment I need to make? Or is it normal for this engine to run so differently in these two climates? I'm at the end of my rope since no one thinks it's a problem except me.
View 1 Replies
I drove home to get something and when I come back out my car won't start, my power windows are down and will not function, no dash lights when key is turned to on position and it will not turn over, no radio, nothing seems to be working, only light I see is the door open indicator light and the security light is blinking but go's out when I insert my key into the ignition
View 1 Replies
I have 2006 Toyota Corolla XRS, and I can't get it to start. Last week I tried to start my car, it just turned over and wouldn't fire. I left it for a couple days, and didn't try anything. I thought the fuel line might of been frozen, because I do live in Canada. This afternoon it warmed up, so I decided to try it out. It started the first try, no problem. I drove straight to the gas station, and bought some methyl hydrate to put in the tank. I drove around a bunch that day to mix it in. After leaving it for a few hours I went and tried to start my car, and it's doing the exact same thing again. Not sure what to do here.
View 1 Replies
I own a 2005 corolla. Has 112k on it. Having issue with car not starting after driven to store and parked. Happened 4 times. Let car sit and it starts. Puzzled to what issue can be.
View 18 Replies
My 1981 Toyota Corolla wagon began to intermittently fail to start when warmed up about five years ago, and by fail to start I mean all lights come on but zero crank and no clicking sounds either. The amount of time I must wait for it to cool down and start again has varied between 20 minutes and today's record, 3 hours. This problem is common with older Toyotas and usually means the starter motor needs to be replaced, believe me I've looked into it, but here's the puzzler. I've replaced the starter motor two times and it has failed to solve the problem. I've replaced the ignition switch four times, same thing. I replaced the battery thinking maybe my old battery was losing mojo, but tears came to my eyes when it happened again.
I've studied how a hot starter head close to the exhaust manifold sees it's resistance go up, that the initial crank requires big voltage throughput. But an aluminum heat shield is built in and wrapping the starter in a heat blocking blanket is not physically possible with my configuration. What I haven't looked into yet is the clutch safety switch. I did receive the following bullet from a previous CarTalk query which read: "If a manual transmission, the clutch safety switch must be working and have low enough "on" resistance. Likewise with an automatic transmission, the neutral safety switch." I would love more detail about the clutch safety switch. I can add this interesting caveat to today's 3 hour record wait. I've gotten good a bump starting the car by myself. Today I bump started it in rolling reverse, re-parked it, and tried restarting again. Started right up when it wouldn't start moments before.
View 4 Replies
Friday of last week my wife's Corolla refused to start. It cranked strongly but refused to catch. Fearing the worst my mechanic father-in-law assumed the timing belt had gone and we spent the weekend replacing that. The tensioner bearing had seized leaving the timing belt glazed but intact and, as far as we could tell, the timing was still correct. We replaced the belt and closed her back. Tired turning it over, nothing. Father-in-law noticed he didn't hear the fuel pump turn on when the key was placed in the ON position so he replaced that and the fuel filter. Turns out that the fuel pump only comes on when it's cranking? Who knew? We didn't. So that's been replaced.
At this point we have it towed to the shop where my father-in-law works(After this point all my information is second hand). We were going to let Big Al, their resident diagnostician, hook up his magic boxes and tell us what's wrong. Big Al suggests it's the distributor so that's changed but it still doesn't run. Big Al suggests that we set the timing incorrectly. That is torn apart again and, remember this is second hand information, "it was right but it was wrong". Whatever, they get it back together and it cranks and runs! Hooray!...but not so fast.
Next morning father-in-law arrives at work and gets bubkis. Cranks, sounds like it wants to start but won't. Somehow Big Al determines it's the PCM and that the car is getting "too much of a fuel pulse from the injectors" I ask if they are able to pull any codes from the computer and I'm told that they can't get any codes from ODBII scanner because it can't communicate with the car's computer. Also it's found that the catalytic converter is completely shot.
View 19 Replies
My wife's '01 Corolla is having trouble starting. It doesn't turn over. At first I thought it might be the alternator, but when I prime it by pushing the gas, it starts right up. I'm thinking fuel pump or fuel line. It was also having some catalytic converter / 02 sensor issues, so wondering if that could be it too.
View 10 Replies
I have a 2010 Toyota Corolla with 25k miles on it.
Yesterday something strange happened for the first time. I unlocked the car (double-clicking the button to unlock all 4 doors, out of habit), got in, turned the key in the ignition, and the dash and console flickered repeatedly while I held down the ignition but the engine wouldn't turn and it wasn't make any noise suggesting it was trying to after an initial sound. I found that if I got out, locked the car, and unlocked it once, that the car would then start (although it had to turn for a couple seconds longer than usual).
Then, a couple hours later when I came back to the car, the same thing happened again.
Note that I could turn the radio on and lights on even though the car wouldn't start - so its not the battery - and the tank is full.
The car drove normally once it was running.
Today it seems to be behaving normally, but I'm wondering if I should be concerned - if I should take it to get checked out while I'm still able to drive it.
What might be going on? Could it have to do with the computer? The security system? Some sensor?
View 1 Replies
My 98 corolla has set for a year plus and the serpentine belt is stuck and will not let the motor turn over fast enough to start. The battery is fully charged, the gas tank is full, the belt is in good shape. The car ran just fine the one year I owned it before sitting so long. I sprayed the belt with belt dressing. Could the alternator or something else be stuck? Should I remove the belt and then reinstall it?
View 8 Replies
I own a Toyota corolla 2005 . I had 4 occasions where the car would not start after I turned it off. If I let it sit and come back car starts. The electrical system was checked out but pep boys with no issue.
View 4 Replies
