I have a 2007 Chrysler T & C minivan. The engine cuts off while driving. Most frequently while turning (to the right!). My mechanic found a loose battery terminal. Nope. Next he suspected the ignition switch which has been a problem with other model years. Nope. Now he wants to try the cam shaft? What could cause it to just die during a right turn? and very frequently.
View 3 RepliesI don't know that much about cars, the fan that turns on to cool the engine when you're driving won't turn off when I turn off the van. Before I knew what was going on it was killing my battery over and over again and I kept getting jumps, finally took it to Sears and bought a new battery. Later that day I came back to the van, about a half hour after turning it off, and realized the fan was still on. There was nothing I could do to get it to stop, Finally it killed the battery once again and I called AAA. The triple A guy who came showed me how to pull out the fuse under the hood with needle nose pliers to stop it.
I had to drive it to Maine to visit my father and while there took it to his mechanics but of course when I pulled into their parking lot the engine fan turned off when I turned off the car. There were a few other repairs to be done, the air conditioner wasn't working and the interior lights weren't turning on, but during the week they had it the engine fan never did that weird thing for them. But when I picked it up two days ago, after driving it around town for a day and having it work fine, I took it on an hour and a half drive and once again the engine fan wouldn't turn off. Should I resign myself to driving around with a pair of needle nose pliers in my glove compartment for the rest of the life of this van??
BTW, I've only owned this van for a few months. The problem started after I had taken it to a garage in New Jersey where I now live to have the air conditioner worked on. The said it had no freon but couldn't find a leak so filled it with freon with a dye in it. They also said I needed to have my front wheels aligned and did that for me.
The wheel and brakes simply lock up while the engine is still running. That is the wheel can not, or with great difficulty and only a tiny bit, be moved and the brakes cannot be pushed down. I did try to pump the brakes four times when the engine was off and each time the pressure increases which I think was a test for brake boosters being OK? The way I got out of this situation was to get off the gas pedal, down shift, close the engine while on the road still and then quickly starting up again, and up shifting to Drive at which point all is normal. It happened before but I was not able to discern if the engine was running or not at that time ( initially when this happened I though the car had stopped actually) but this time there were no fans, no sounds, and a very empty road so I was able to tell that the engine indeed stays on the whole time this happens. I will take this car in but am trying to understand more about this kind of problem.
View 3 RepliesWe have had an engine light that comes on when it is wet out. (Usually from rain) Until recently, the codes were not stored in memory. The last time we tried this, there was a 420 code set. Our mechanic said it was the catalytic converter. This vehicle is a 2006 and only has a 100,000 miles on it. Neither of the oxygen sensors have been replaced. The car doesn't seem to run any differently when the engine light comes on.
View 10 RepliesThe oil light on my 2005 Chryler Town & Country comes on when started when it is cold outside. It stays on until I turn the key off and restart, then it goes out and does not come back on. My mechanic cannot find anything wrong. This only happens in cold weather, not in the summer.
View 10 Repliesmy 1997 town and country van with the 3.8 liter engine keeps stalling at unpredictable times. sometimes when it is cold first thing in the morning, other times when fully warmed up at a stop light and sometimes on the interstate at 70 mph. The tach drops to zero, the speedometer drops to zero, the check engine light blinks on and then back off, the computer doesn't record any error codes. it causes the cruise control to drop out while on the hiway. the engine always starts right back up, for how long, its unpredictable. Mechanics have replaced the three engine sensors twice, checked and cleaned wiring contacts at sensors and engine computer. And also the Knock sensor has already been disconnected per a chrysler bulletin. At highway speeds the engine usually bucks and then keeps running, but sometimes dies.
View 2 RepliesI had a mechanic replace my original engine 0f 120k with a 60k engine. Seems like I ran out of oil and warped my original engine and this was my only option. So as soon as I get the van back the transmission is dripping fluid and the mechanic said that some thing in the transmission went bad and must be replaced. This has nothing to do with replacing your engine. Can this be true?
View 7 RepliesI am the 2nd owner of a 2001 Chrysler Town and Country Minivan Limited. The vehicle is in very good shape and I service it every three months and have the tires rotated every six months.
Just recently I have been having a problem with it not wanting to start. I have had a bit of a squeal coming from the engine compartment and know it is the serpentine belt that needs to be changed out before it gets bad (I have only heard the squeal probably three times since December 2012.)
I would rather buy my parts and have the mechanic put them on instead of him buying them and charging me double.
My question is...do you think it is only my belt or should I think in the direction of the Starter or something else. After about threee or four tries it will finally start.
I have a 2003 Chrysler Town & Country and the check engine light is on. I brought the van to my mechanic and he told me there was a code that told him there was a misfire on cylinder #1. He started out with replacing the wire to cylinder #1, no change. He replaced the spark plug, no change. He installed a new fuel injector, no change. The van runs a little ruff at idle and when at a stop light.
View 9 Replies2007 Chrysler Town & Country with 74K. The check engine light comes on and the parts store diagnostic says P0404, a clogged EGR valve. On my model, replacing the EGR valve involves taking out the alternator, which involves removing the passenger wheel. That's beyond my skill set.
So, can I just replace the EGR tube and pour some Sea Foam motor treatment directly into the EGR? Would that hurt anything?
I have a 2003 T&C 3.6L with tow package, purchased used (privately) with 25K miles in 2006. Since I have owned it, it will occasionally not go into any gear when first started after sitting at least overnight- basically stays in neutral until engine is revved to about 2500 RPM. You can rev it in neutral or while it's in gear. This always works, and the transmission will then work fine until another overnight stay. I have had the transmission serviced 3-4 times (once when it first happened, and then at recommended intervals. The car now has 96K on it, and it has been happening less frequently (in fact, it hasn't occurred in about two weeks). I have discussed this with two Chrysler dealers, and have left it overnight twice, but of course it didn't repeat at the dealer. I haven't been able to correlate when it happens with anything except: it seems to occur more frequently when garaged in Pittsburgh than when sitting outside in Myrtle Beach (I spend time in both places).
View 3 RepliesYesterday afternoon the "Service Engine Soon" light turned on in our '97 Town & Country (3.8L engine). A few minutes later (while I headed to Autozone to get the code read) the light went out. They were still able to retrieve 2 codes: P0700 and P1775. Internet searches suggest a possible bad solenoid pack for the transmission.
More background: The van has 161,000 miles, and the original owners got the transmission replaced at 40,000 miles under warranty (4 speed automatic). The transmission fluid was replaced (pan drop method) at about 153,000 miles and at 112,000 miles, etc., with Chrysler ATF +4 fluid. The van got new plugs and wires about 15,000 miles ago. (It also got a new radiator and hoses yesterday morning which I think is unrelated.) Another possible clue: On long trips sometimes the 2nd transmission shift will become slightly rough but it still shifts and after it has rested everything returns to normal. This occasional shifting issue has been going on for over 5 years and again when it manifests itself it is very slight.
My Chysler Town and Country started fine on a morning when it was 9 degrees. (no garage, so it was out in the weather.) I let it run for a couple of minutes so things would begin to thaw and then I drove to work. It ran really rough. I figured that once it warmed up, it would smooth out, but it did not. Even after the weather warmed up into the 50's 5 days later, it still runs rough. Now, I am also getting a check engine light. What could be wrong?
View 3 RepliesI have a 2006 Town and Country with the 3.3L V6. The last four times I filled the gas tank the engine spits and sputters after running for 2 - 3 minutes. Sometimes it will even stall out. It will re-start after cranking for 4 - 5 seconds and then runs fine. It only does this right after I fill the tank and doesn't do it again until the next fill up. Thought that I might have water in the tank so I added a bottle of HEET to see if it would cure the problem, no effect at all..
View 4 RepliesI have a Chrysler Sebring 2005Engine cuts out at 2500 spurts stutters can't go above 35 mph...But still runs... No cruise available will not come on.. Engine light on... Which I guess from what I read is normal In "limp mode" Got it home.. Shut it off.. Starts back up.. I'm thinking cam/crank shaft sensor? Both of those are new.. And an ECM all from a prior problem.. Or fuel pump.?? Not enough pressure to keep up with demand..
View 4 RepliesMy Town & Country 07 shudders (best word I can use to describe the sensation) between 40-42 MPH. First repair place convinced me I need tie rods, did not resolve problem. Next place said I need struts and new tires but the problem is not solved. Why the van would do this shudder, rumble, whatever - but only at 40? If I rapidly accelerate, like getting on the highway, it doesn't happen.
View 3 RepliesWhen I had 67 miles on my 2013 Chrysler T&C Van it stalled and would not immediately restart. The Electronic Vehicle Information Center revealed both the coolant and engine oil temp was in excess of 300 degrees. After 15 minutes the temps were between 280 and 285. The engine started and I drove slowly the3 miles to my house and had it towed to the dealership the next day. Mechanic found the quick connect coolant line to 3rd seat heater was improperly installed at factory allowing 1 gallon plus of coolant to escape.
A mechanical engineer and a Chrysler mech ( not one from the dealership) advises it is just a matter of time until I have internal engine damage. Chrysler Owner Assistance Dept assigned a case mgr. She reported the van was repaired and operating properly because the coolant line was repaired. Their first offer was 1 months loan payment, which I refused.
I have a 2001 Chrysler Town and Country w/ 3.8L engine and 196,000 miles. Several years ago the transmission was rebuilt. Since then the speedometer was off 1-2 mph at 65 mph. I recently bought new tires and now the speedometer is off 2-3 mph at 65 mph. My question is: How do you calibrate the speedometer? I know all about the reset for a bouncing/stuck needle. That does not calibrate the scale. I've read about gear replacement and found the Hyper-Tech calibration programmer (which is not available for the 2001 T&C).
View 5 RepliesMy 2008 Chrysler Town & Country has, since it was 2 mos. old, had a "no-start" problem. This is not a stalling problem. It happens when the car is off and I try to turn it on. The problem is very sporadic (sometimes several times a day - I do lots of short drives - sometimes several times over the course of a few weeks, then no problems for months). When I turn the key in the ignition, all electrical components come on (dashboard lights, air, radio, etc.) but nothing happens with the engine (it does not make a sound). The dealer has replaced a computer component, the battery, the starter, the electronic keys but the problem always happens again (within a few days of it the "repair"). I usually have to turn the key 3-12 times (sometimes I take it out of the ignition, sometimes I pray!) and eventually the engine starts. Because the problem is sporadic, the dealer has not been able to replicate the problem (though they have, at times, had it for a week or more and even driven it as if it were their own, home at night, to work, to run errands). Although the car eventually starts, it is very problematic when I have to be somewhere and it takes 10 minutes (not to mention a lot of worrying) to get it started.
View 3 Repliesmy daughter has a 2005 Chrysler minivan -- v 6 automatic -- the transmission will not lock in park -- it free wheels -- only stops moving when emergency break is applied --the wheels will move separately -- will not move the other wheel when in park -- if picked up one wheel -- and in park -- it still moves -- there is a gear that is rubbing the cover in back of transmission -- the upper gear iseems loose -- and wobbly -- is there a simple repair there
View 1 RepliesThis car has 145K and transmission was replaced 3 years ago with used one that had 75K at 105K. Since replacement 3 yrs ago it runs great in the winter, when cold and no humidity, and runs extremely bad when it is warm and humid. This summer was hot with no humidity (in Kansas) and ran great. Now with fall and humidity back it is acting up again. The rpm's will show a jump up and down (300-500 rpm) while driving at 55mph or slower and do the same while at a stop light. At 70-75 the rpm's do not change but you can sure feel it at 55mph not looking at the rpm's move. The dealership has put it on the computer and it shows nothing. It clunks and thuds when driving slowly and sounds hard on the vehicle.
View 5 Replies