Chevrolet - S-10 :: 2000 - Getting Groaning Noise When Turning The Wheel?
Dec 9, 2014
I'm driving a 2000 Chevy S-10 pickup, 5 spd manual, with about 133k miles on. Truck has been great for the 11 years I've owned it. I've had this problem for a while, and for some reason am only getting around to it now, as I've never directly asked a mechanic to fix it or diagnose it. I think because it didn't seem urgent, and out of fear I'll get the runaround on what it actually is.
But now, what was once just a sort of "groaning sound" when I turned the wheel, has now actually turned into some tightness in the wheel itself -- especially if the car is cold or hasn't moved in a while. Here's a video clip of the sound: [URL]...
I suspect it's a problem with the power steering fluid system. I've been parallel parking for years, and don't know if that's what's had an impact.
View 6 Replies
Advertisement
105K miles, developing a groaning noise when turning steering wheel during low speeds and stopped. Can feel slightly through steering column. No other problems, no clunking or any grinding noises, just "groaning" sound on initial movement. Fluid is full. While searching fix, I found this article on the C70 model, sounds like I might have same thing on my XC90. [URL] ....
View 6 Replies
A few days ago my car started making a groaning noise when I turn the steering wheel. Sounds like it's coming from the middle of the car. Makes the noise whether the car is moving or not.
View 12 Replies
I have an 04Honda Civic manual transmission that suddenly started making an ugly groaning sound whenever i accelerate, apply the brakes, or turn. It sounds like a metal-on-metal noise like something is loose or cracked. It even happens if I turn the steering wheel when the car is stationary. I tried to listen to where it's coming from, but all I can tell is that it's somewhere in the front suspension.
Mechanic said he didn't see anything wrong on the front suspension, but recommended replacing rear control arms.
View 2 Replies
My truck makes a weird noise when I turn right.
View 2 Replies
What do I need to do about the high pitched noise I hear when turning the steering wheel right or left?
View 2 Replies
So one of two things is happening:
1. I'm paranoid because I just bought my 2011 3.5 Eco 4x4 a month ago and every little thing I hear go bump I stress over...
Or...
2. I've got a control arm/U-joint issue.
When I make turns beyond say 20 degree wheel turn (so almost 90% of turning distances) I hear a groaning type sound coming from the truck. Sounds like it's located in the front suspension area. Sounds like the sound is following the rotation of the wheels though if you can visualize what I mean.
I've had new tires put on since I bought it Oct. 5th but just noticed the noise about a week or two ago. No other work done since purchasing.
View 14 Replies
I drive a 2003 Chevy Cavalier with approximately 75,000 miles on it, and it has always run exceptionally well. However, during the last couple of months it has developed what I would consider a lower-pitched "whine" or "groan" emanating from the front of the car when making a turn. Here are a few specifics:
-The noise is more pronounced on tighter turns and/or when moving at a faster speed. For example, doing a U-turn causes the noise to be very pronounced; turning into a parking space at a very low speed barely creates any noticeable noise at all.-The noise seems to be worse when making a left turn than when making a right turn, however turning either direction can create the noise.-The noise seems to have gotten slightly more pronounced over time--that is, it doesn't seem to have been triggered by a single event such as running over a pothole.
I am not particularly well-versed in diagnosing car problems, particularly when it involves anything to do with the drive train (which is what I suspect here). Some rudimentary internet research seems to point towards a damaged or failing CV joint in one of the front wheels, although this has not been properly diagnosed. Thus, my questions are as follows:
-What is the likely source of the noise? Is a damaged CV joint the most likely explanation, or is this explainable in other ways?-How serious of a problem is this? If indeed it is the CV joint, my understanding is that this is an issue that needs to be addressed promptly as it could quickly become a dangerous situation (some reports indicate that the wheel(s) might come off while driving).
View 7 Replies
I have a 2000 Mitsubishi Eclipse GT V6 FWD. about 138, xxx miles
My left rear tire/wheel has free - play (clicking movement) when grabbed at ONLY the 3 o'clock position and push/pulled back and forth (no free-play at 12-6 direction) in the air.
I had grinding noise from rear left side wheel when turning right couple weeks ago. After replacing wheel hub bearing assembly, the noise is gone. But still remains the movement ONLY at 3 o'clock. I replaced stabilizer bar links in both rear sides. This link doesn't look like the reason of free-play (clicking movement).
Also, I tested (push or pull) after switching the other side(right) wheel, it still had clicking movement at 3 pm. Therefore, it is not a wheel problem itself, I guess.
And I took off the wheel and fasten the lug nuts onto the rotor itself (so, without wheel in this case), then push/pull the rotor at 3 pm, but this time no movement in any directions. @@;; weird.. ONLY, I can feel the clicking movement at 3pm on the Wheel (or tire) even after rotating wheel, exactly in same spot (3 pm) movement~!!!! What's this case??
All 4 wheels aligned recently after got new tires.
I scrutinized inside wheel while pushing/pulling back and forth. But I cannot figure out which one is problem.
1. Knuckle.
2. Lower control arm ( or Rear rear control arm, not typo) which has a Ball joint and a cam bolt the other side.
3. Rear front control arm
4. trailing arm.
5. stabilizer bar link. (new)
6. Wheel hub bearing assembly (new, double-checked the nuts and torques)
7. Rotor and pads (new, if I push the rotor itself then no wobble or clicking at all directions as desribed above)
Where should I direct my attention and/or what component(s) should I look at given the indications above?
When I pull/push the wheel at 3 o'clock, it feels like wiggling the whole part of lower knuckle where is the connection part between the part of 4 bolt (backside) of hub assembly and lower side of knuckle.
I heard that 12 and 6 is usually an indication of ball joint, and play 9 and 3 is usually in indication of steering components ( tie rods , steering shaft or rack itself ), and all around play is an indication of wheel bearing (usually accompanied with a growling noise ).
View 5 Replies
2002 regal LS 3800 V6 . Steering makes a groaning sound in either direction, even when not moving.
View 7 Replies
Had my 2004 Phaeton in to take care of some smaller interior issues under warranty. One of them was that the steering column makes a groaning noise when it is being retracted. Service advisor told me that the Phaeton technician (who is also the shop foreman - Jim Ellis VW Marietta) told him that this is common with Phaetons and there isn't a realistic fix for it. I've read the post already about the felt strip wearing down, but I'm wondering how many of you have the steering column groaning noise when it's being retracted when the car is shut off? I'm trying to decide whether to push the issue with the dealer or just live with it.
View 12 Replies
I have a 1991 Toyota Corolla Wagon (150,000 miles) with noise coming from right front wheel well. My car is making groaning and creaking noises like the hinges of an old wooden door. CV joints serviced <5000 miles and the boots are clean and intact. There is no clicking noises during a turn Left or Right. Bouncing the right front corner does not replicate the sounds, tho' there is some slight squeaking noise not heard from the shocks/struts in the other corners. The sound is NOT heard in the morning going to work, but is very noticeable driving home at 5pm. I notice the sound going downhill at 35 mph, but goes away with light braking, Going over railroad tracks does not affect the noises. I'm thinking this could be worn bushings, strut mounts or who knows what?
View 1 Replies
My friend with an 07 with about 109k miles on it now has started getting a "groaning" noise whenever the wheel is cut hard to the right or left, either sitting still or rolling. A local repair shop (not the dealer) checked it out and said there was some "stuff that needed to be lubricated". Not trusting this opinion he went to a Toyota dealer where he was getting new brake pads installed on all 4 corners (no Lexus dealer in the city where he lives), they diagnosed the car as needing 4 new struts and a new balljoint.
If in fact he does need the struts and balljoint, I am thinking chances are there will be a bunch more suspension stuff that should really be done at the same time when everything is apart anyway - perhaps bushings, endlinks, etc?
Is he better off sticking with the OEM strut replacements or should he go aftermarket? He's not looking to slam the car or anything, and is more of a ride comfort guy than handling enthusiast.
View 1 Replies
What is causing the noise coming from the front end of my 2000 VW Passat B5 1.8T (73000 miles). When I'm going slowly and turn the wheel all the way to the left, I get a loud, low pitched groaning/moaning sound coming from the drivers side of the front end of the car. This occurs especially when turning at low speeds, such as entering or exiting a parking space, and it also seems like it happens a lot when I'm backing out of a parking space (although it may just be that I notice it more then). It also seems worse when the car has been sitting still for a while. I do not hear such a noise when I am going faster (like turning left). I also don't believe I've ever heard a "knocking" sound in conjunction with this problem.
Could you describe the differences between control arms, tie-rod ends, and maybe explain how the sounds might vary between these two problems? What else could it be?
How could I diagnose this myself? What should I look for? I took it in to my local dealership and they said that they could not reproduce the noise. This is total BS, because it makes the noises ALL THE TIME! They refilled my power steering fluid, but this made absolutely no difference.
View 5 Replies
I just recently replaced the inner and outer tie rods an got a 4 wheel alignment on my 2005 camry le and now whenever you turn the steering wheel all the way lleft or right, it makes a loud groaning noise, and it sounds like something is scraping kinda? What this could be an how to solve this problem? It is not low on power steering fluid...!
View 3 Replies
You can hear the clunky, groaning noise around 8 and 11 seconds when I turn the steering wheel, making a tight u-turn in an alley way.
What can it be..? I hope it has something to do with my tires since I'm getting new ones today. The current ones are pretty bald.
Quick video clip of noise...
View 7 Replies
I have a 2001 Chevy Malibu ,I have noticed a whirling sound coming from my steering wheel whenever I am turning. I am wondering what could be the cause and should I get it checked out.
View 6 Replies
I was driving home the other day when i heard a groaning when turning. i stopped to check the power steering fluid at O'PepZone and it was really low. i bought some fluid poured it in while the car was running. it foamed a bit from all the air but then the PSF started emptying out of the reservoir underneath the car.
By the time i got home it was groaning and basically empty of PSF again. when i crawled under the car, i saw a lot of fluid on the passenger (right ) side of the car by the subframe and a little bit by the driver (left) side of the car. the leaks seem to be from the ends of the rack and pinion. no detectable leaks by the hose/hard line connections.
Other than the leak(s), the steering has felt very good. no play to speak of and no weird sounds either.
This makes me wonder if i somehow damaged the seals when i installed my PSS9 coilovers....
View 24 Replies
2007 honda crv fwd ... My car does an intermittent groan/rub thing when its been running for a bit and I am making turns. No rhyme or reason as to when it randomly happens. The repair was for my ac compressor...so its not that. It's also fed so its not the common rear dif issue Honda has.
View 16 Replies
I just noticed the 4 wheel drive on my 2000 Chevy S10 doesn't seem to be engaging. The traction doesn't get any better turning it on and the other day I got stuck on a hill and the back wheels weren't spinning. What I can check or look at to fix it?
View 1 Replies
Windstar 2000, 260K, ABS not functioning, previously ABS light on all the time now of even with Key on Engine Stopped. While a long drive after 1600 KM failed to apply the Cruis. Horn not blowing. Retried cruise engaged but resume, horn, deceleration did not not function. Stopped, disconnected battery for half hour cruise and horn started functioning. Again after 400 KM stopped functioning. Now it is intermittent. Tail lights normally working. Cruise deactivating switch (switch unser the master brake cylinder) was changed by ford 5 years back, it is dry no signs of brake oil on it. Fuse no 10 is OK. Rapid repeated turning steering wheel has no effect. CEL On since 4 years code is for bank 2 CTM.
View 7 Replies
