Chevrolet - Equinox :: Burning Smell Inside More Intense On Driver Side Under Steering Column
Feb 6, 2012
Just like the title states, there is an intense burning smell (like plastic or electronic) inside my 2007 chevrolet equinox. I first noticed it this morning; last night there was no smell. The smell is most intense on the driver's side under the steering column. I checked the fuses and none of them are blown and everything seems to be working on the interior of the car. I am having electrical issues with the back windshield wiper not working and the passenger airbag seat indicator not working, but both of those issues have been going on for a while now. The only other issue I know of is that sometimes (but not every time) my key won't come out of the ignition when I turn the egine off. To get it out, I push the little release button on the interior of the steering column. I have been doing this for about a year now, but I wouldn't think that that would have anything to do with a burning smell....
View 5 Replies
Advertisement
So yesterday I was on my way home from work, and I had smelled a little burning and then I saw smoke from the steering column???? i pulled over and it had stopped no lights came up? the car is fine now..? I don't know whats going on?
View 4 Replies
So i am going to drive to school and going up the hill on my street to turn on the road and i give the car some power as i usually flore it up the hill but suddenly the check engine light pops up and the car doesn't want to go. My foot was all the way down on the gas and i was getting like 3-4 rpm and the car wouldn't even get up to 30mph. so i go around the block trying new things turn off the car and restart it and the same happens so i go back home and park it in my driveway and i turn the car off and get out. I smell something burning from the car so i pop the hood and check underneath the car but no smoke just and intense burning smell. I don't know what is wrong the car just had the recalls done a week ago and this is the first thing that ever happened like this to the car. Has this ever happened to you? What do you think is wrong with the car?
View 4 Replies
We've noticed that when we have the inside air circulation on, we're still getting exhaust fumes from outside the vehicle and other "smells", too. I've never had this problem before and the dealership (and manufacturer) say that it isn't air tight and we would still get outside odors coming in. I don't accept this answer. We've never had this problem on any other vehicle we've driven. My husband has heart issues and when exhaust fumes still enter the car, it effects his heart. The only way to stop odors from entering the vehicle is to turn off the fan - but that creates other issues (especially with fogging up windows, etc). So, how do we remedy this? We've taken it in for maintenance, and they say everything is "shutting/securing" as it's supposed to be. There's no leak anywhere else. We don't accept this answer (and even one of the service techs say it shouldn't do that, but when they're told by the manufacturer that's what we have to tell the customer, that's what we have to do). My husband hates to ride in the Equinox now due to this problem. We've read up on the "Lemon Law" and may have to enforce it.
View 11 Replies
I am getting a burning smell from the drivers side rear wheel. It does not seem to occur all of the time but when it does, when I get out of the truck I can smell it. We found its location just by smelling around the truck.
The brakes are not noticeably grinding and I don't recall ever getting a smell like this from brakes.
View 14 Replies
After smelling burning for a few days randomly, I've narrowed it down to the rear driver side wheel. After about on the highway, I stopped, and it is HOT! I pulled the wheel but the hub spins easily 1/16th of a turn or so, as it's in park, so the brakes are not dragging. What else this could be? Or are they dragging at random? The rotor is perfect, no rust and no groves, so hte pads are doing their job. 1/16th of a turn is way exaderation, but it can move. Also there's no sounds at all.
View 13 Replies
My car smells like some plastic part is burning inside. The heat works just fine but for some reason i am getting this horrible smell. How to get to air filter of the fan.
View 5 Replies
Sometimes my steering wheel squeaks. It sounds like plastic rubbing against plastic. The first dealership said the compartment under the steering wheel was rubbing against the column or something inside and that they made an adjustment and the sound stopped. It didn't. The second dealership told me they couldn't figure it out unless they heard the sound. Since it's not every time I drive, sure enough it made no noise at the dealership that day. The head of the shop looked into it and couldn't figure it out. He dry-lubed behind the steering wheel to get to a spring back there. He did the same for where the steering column comes into the car at the bottom of the car. Good for a few days. Squeaking back today.
View 9 Replies
117,000 miles, 1 previous corporate car owner, 30 day warrant. Bought 1 week ago, odor of burnt electrical. Seems to be stronger in the back inside.
View 8 Replies
After battling the general nitwit public earlier. I was on my way home and as I neared my house, a party bus was blocking the road. Well, I got angry, shifted to reverse, revved the engine while letting out the clutch to back up and take a different route. Then this horrible burning electric/plastic smell inundated the inside of my R. I knew I rode that clutch while backing up. My question is did I do noticeable damage my clutch, or is it one of those: it'll be fine just don't do it again thing?
View 4 Replies
We have a 2003 Explorer Sportrac and the fuel cap light came on. Then ck engine light came on. took it to a dealer to check it out. Said it has a fuel pressur issue. could be the cap or something in the fuel tank. it needs a pressure check they said. cleared codes and put new factory fuel cap on. 2 weeks later it happened again.
XLT model 108,000 miles on it and we are the original owners...
View 1 Replies
I have a 2005 Chevy Equinox that has developed an odd issue. For about a month, after a good rain, I have a puddle of water in the floor carpet of the front passenger side - while parked. It develops from the center of the car to about the middle of the floor below the seat. So since that is the case I don't think the side window is leaking but I have looked for signs of water coming in. Nothing. The windshield was replaced about 5 years ago but again, no signs that water is coming in from there either. It can't be from the bottom of the car, right? I mean it happens while it is parked, so that doesn't make sense.
View 6 Replies
My father in-law gave us a 1996 explorer AWD with a 5.0 for my son who is 16. A couple of weeks later he's out learning with my wife and a very strong electrical smell took over the cabin. They came right home and when I got in I found all of the gauges not working. The instrument lights work, blinkers work, but all gauges do nothing. Pulled cluster and wires look O.K. behind it from what I can see. They saw no smoke, just smell, fuses look O.K.. What could cook on this vehicle that would wipe out just the gauges?
View 5 Replies
I have a Chevy Prizm 1998 and I drive about 250 miles a week. Recently I started going through a quart of oil in 2 weeks. My engine sounds good. I am religious about changing my oil and filter every 3,000 miles and I check my oil every time I fill up my gas tank. There is no blue smoke and no oil spots on the garage. Could it possibly be a small leak that only occurs while I am driving or a am I dreaming?
View 4 Replies
Recently I revived my '98 S10 Blazer after it had been hibernating in my backyard for about a year. After getting it started I proceeded to reverse out of my driveway and as soon as I hit the brakes and tried to shift into drive I heard a pop/snap sound from the steering column and it would not shift out of reverse. In fact, the gear selection indicator light is no longer present but the rest of the gear display is lit up.
Also the shift lever feels different... not quite floppy, but it doesn't have the same resistance like it used to. I then proceeded to restart the car, but of course it won't fire up again because it is now stuck in reverse despite what position the shift lever is in. I've removed the steering column cover, but everything appears to be ok there, and the shift linkage looks OK at least until it goes into the firewall (haven't traced it all the way to the tranny).
View 2 Replies
My 2004 Chevrolet Siverado's steering box seems to leak. It was adressed at one point but then just seemed to leak all over my driveway, it sits alot. It also make a loud winding sound when it first starts in cold weather then goes away when warmed up? Finally the oil pressure gauge is pinned passed 80 psi. just gauge?
View 3 Replies
I felt a sudden heavy vibration in steering wheel on my gen 7 Celica. At first, I thought it was wheel balancing or uneven road surface (which is very bad in my area); but discovered later, burning smell from nearside (left) front wheel, all 5 lug nuts loose, whole wheel very hot, break binding. I had driven about 15 miles on 2 occasions when I experienced the vibration. But the vibration wasn't there all the time - only at certain speeds and road surface, which made me think it was just wheel balancing; (checked other wheels everything ok). Don’t know how long brake was binding for.
It seems the piston is not retracting under normal operation so causing the binding. As to the nuts coming loose; I think it is because of the heat from the wheel; as if you apply heat to tight nuts and bolts they would normally come loose - that is what mechanics seems to do when they find nuts and bolts are difficult to undo.
Piston hard to push back into cylinder when bleed nut is locked, but easy to go back (all the way) without any resistance when bleed nut is released. But when applied brake again and again pads stays on; but when I tap caliper with a piece of wood the pads releases. I’m puzzled...as caliper is free and slides as it should when checked against opposite wheel. The opposite wheel is ok - pads on that still 6mm thick; while pads on problem brake are only 3mm thick. I noticed there’s a block under the bonnet where brake pipes are connected to. What is it, and its purpose? Could it be that something is wrong with that hence the problem? The disc/rotor is not warped.
View 5 Replies
Okay so I changed my rear brakes, disc and pads on March 18th. The change went okay. Now I'm getting a burning smell from the front pad, specifically the passenger side.
View 1 Replies
I have an 04 2.8 v6 5spd. I have recently began smelling oil burning as in leaking on exhaust or something. There is no visible oil under the car, on the engine and no oil at all on ground even with car parked for days. It seems to be from the backside of the engine on passenger side. I am thinking a leaky valve cover gasket. I know a drop of oil will burn and smell strongly. I still want to fix it though. Should I just get a valve cover gasket kit and replace them. Its very hard to see back there.
View 7 Replies
My area has been hammered by rain for the past several weeks and I've noticed water leaking in around my driver's side headliner and down my column. I suspect it is the moonroof drain hole that is causing the problem, but when I pour water into the hole it drains out of the bottom of the car like it should be.
I want to check the drain nipple under the column trim to see if the hose is damaged there and leaking, but I'm not sure how to remove it. I've read about the Sante Fe trim removal and it sounds like you should just be able to pull on it from the top and work your way down, but I want to check as I don't want to start breaking clips to "test" out if it works.
Is the column held in by friction clips that should come loose if I pull with enough pressure toward the rear-view mirror?
View 1 Replies
We had what seemed like a normal situation with the driver's side burning pink for a minute then going out. I thought it was the bulb, purchased the bulb and the light burned bright, though more yellow than the typical light blue, and then went out.
I replaced the Ballast with a different one, and got the same effect. The HID lights, burns OK for about 20 seconds, starts to pulse a little then shuts off.
View 4 Replies
