Chevrolet - Beretta :: Brakes Don't Work While Sharply Turning
Aug 13, 2014
My brakes work well enough while going straight. However, when I am sharply turning the car and braking at the same time (like when I'm pulling into a parking space), the brakes don't work.
This is potentially dangerous for the pedestrians/other cars near me when I'm parking (but no accidents yet). A quick brake check by my mechanic while the car was in for something else showed nothing out of the ordinary in there. It's a 1995 Chevy Beretta.
Questions: What is causing it? How is it fixed? Is this something that a tinkering amateur can do, or should I go to a professional.
View 6 Replies
Advertisement
I continue to have problems with my Chevy Beretta. The original problem was that -- after my neice's husband ran the car out of gas -- we had to replace the fuel filter. That was last spring. Afterward the car seemed to run fine until the weather got hot. Now it seems to stall generally in high heat and humidity.
I only paid $800 for the car, and my idea was to get everything fixed on it and drive it a while to get my money out of it. I don't want to go into debt for a car, and I don't want to buy another one (unless I have to). I travel a lot, but I don't need my car for work -- just for personal travel.
A local mechanic has changed the crankshaft position sensor and now the ignition module. I got the car out of the shop again yesterday, but the problem remains. I could barely drive it around the block this evening. The temperature is 73F, humidity is 84%, and dewpoint is 68.
Is this problem definitely weather related? What could be the cause? Vapor lock? An intermittent problem with the fuel pump, filters, or fuel injector? Is it possible to get this fixed for good?
View 6 Replies
I own a 2002 Pontiac Montana van with 36,000 original miles. The past year it started making a loud whining noise that seems to come from the rear of the vehicle. It seems to be worse in summer than in winter. It iis really loud when turning into a parking lot or when turning sharply to go thru a drive thru at a restaurant. I have taken it to several mechanics and also to a dealership, and no one seems to be able to find the problem.
View 4 Replies
2007 G6 Problem occurs at slow speed with sharp turning, such as coming out or into the driveway. As the steering rack moves slowly it tends to stick and release 3 or 4 times when turning sharply at very slow speed. It makes a sound so loud even the passenger cam hear it and the driver can feel it in the steering wheel. Does occur while driving normally. The dealer says its a GM problem with no real correction. They greased the rack and said the problem would return soon, but it is not a safety problem. So far they have been right on both counts. Are there any real cures?
View 5 Replies
2005 Malibu LS 3.5L (Epsilon Body) with rear disk brakes. Do the rear disk brake pads have the wear indicators just like the front pads?
Car started making an intermittent low pitch whistle noise (sounds like an old steam locomotive whistle, just really low muffled) but it only does it while turning sharply on right turns. It doesn't come on while turning left or driving straight.
At first I suspected the fuel pump but I'm not sure. I've owned the car since 2008 and never replaced the rear brakes, so it might be time!
View 7 Replies
My 2008 camry se is pulling hard to the left, even just taking my hands off the steering wheel for less then a second it will pull sharply to the left. why is that?
I have 20x8.5 wheels with 245/35 tires. I recently changed the front tires with a brand new pair and also got an alignment after lowering my car on H&R springs and it seemed like it pulled even harder after doing the new tires and alignment and my steering wheel seemed like it would shake from time to time when applying the brake (car always pulled even before lowering it). I took it back to the tire shop and they did another alignment and put the new tires in the back and the older tires in the front. It then kinda stopped shaking the steering wheel and the pull to the left wasnt bad but it still pulls hard to the left.
I got the front rotors resurfaced with new pads about 3-4 months ago when my steering wheel would shake very drastic, but it was gone right after the repair."no more shaking"
so what could the problem be if its not the alignment?
View 14 Replies
My 2003 with 150K miles has had the blinking A/C light problem for the past year or so. I ran the diagnosis, got the 22 code, so it seems the clutch needs to be adjusted or replaced. If I leave the A/C on Max with the fan on at Max, the A/C works fine (for at least as long as my daily commute, about 40 mins). Once I turn the fan down or turn Max off, the lights start blinking within 5-10 minutes and the A/C doesn't work. Is this consistent with the clutch problem?
View 5 Replies
My daughter owns a 2002 Accent GL with auto trans. Over the weekend I worked on the cars front end. It needed new CV shafts,front bearings,a tie rod end, ball joints and front brake pads. I drained the trans fluid to prevent leaks when the shafts were removed and in the process of doing the brakes, I also had to use a tool to compress the puck on the disc brakes to get the new pads in. After everything was put back together and the trans fluid was added to the car, I started it up and went to back it out to test drive. To my dismay, the brakes would not work. I tried using the parking brake to stop ( didn't check it, foolish me) it was pretty loose. It backed into my Baja Bug, crunch. I put it in drive to get it off the bug, it then traveled at low speed heading for my restored 1955 Corvette in the garage. I put it in park, kept going, stomped on the brakes, it kept going until it crunched my Corvette. I was trying to turn it off while this was going on, it took place in a space of 20 feet, so not much time to react.
Pushed it back and put it back in park, started it up again, gave it a minute and all was good. I think the brakes just needed a bit more vacuum to function after the pucks were compressed and maybe the trans did not respond well due to the low fluid level until it was pumping again. Just wanted other users to be aware of what happened to me and to be aware. Runs great now after low speed rampage.
View 1 Replies
I have a Volvo P1800 I am restoring. The problem I have is the brakes don't work. The brake peddle does to the floor so I think and have read that this is due to the master brake cylinder. I removed the to of the master reservoir and found it is bone dry but the main reservoir is full? Why this is if the seals have failed surely there would still be brake fluid in the master reservoir???
View 3 Replies
I found that my 2012 CAMRY SE has an issue when you turn sharply either performing a U turn or any sharp turn you will hear a clunking noise and feel a thumping in the steering wheel. The other day I had to make a U-turn and the front wheel of the car actually skidded a bit half way thru the turn and made the clunking/thumping noise.
I have also experienced this backing out of parking spaces when the wheel is turned hard. I can recreate the issue simply by doing tight circles in a parking lot. The front passenger in the car can also hear the thumping. I found another 2012 CAMRY SE owner at work and we recreated the same exact issue in the work parking lot. You actually feel the front tire skid a bit or get that sensation.
OK - the dealer called me today after having their mechanic test drive the car. They told me this is NORMAL and even the new 2014 Camry does the same thing. They said the new electronic steering makes this noise on sharp or extreme turns and it's not like the old intermediate steering shaft problems they had before.
View 3 Replies
my 1992 BMW 3-series makes a horrible noise when I turn the wheel sharply in either direction. the noise however gets better as the car warms up, and after half an hour of driving has gone away. if I turn the engine off for an hour and start it up again, the noise is back. my sister think it's the steering column. my brother-in-law thinks it's the power steering pump, or some kind of really complicated switch to do with RPM that I don't understand.
View 1 Replies
When I turn my 2005 Subaru Outback sharply, especially when in reverse, it seems to brake without my touching the brake pedal. About the same time it started, the automatic transmission would give a slight jump when shifting into or out of neutral. Took it to one shop, they said I needed a new transmission to install. Took it to another shop, they fixed my differential. But they didn't fix the seeming braking. The nearest dealer is 150 miles away and I haven't been able to get there at the right time on a weekday.
View 4 Replies
My husband was having to have his truck jumped morning and evening mechanic said it wasn,t a bad battery but changing fuses or swiches wasn,t working. We bought a new battery a day latter wipers don,t work. mechanic buys a used motor, motor works in test colorado but doesn,t work in my husbands truck mechanic is a little stumped.
View 1 Replies
I am having an issue with my 2006 Toyota Prius. The battery seems to be fine, but when I turn on the headlights the battery suddenly starts dropping sharply and the lights quickly dim. I turn them back off and it starts charging properly again. It only does it when I turn on the headlights. Weird part is if I hit a bump just right sometimes it goes back to normal for a while, but then starts discharging again.
View 7 Replies
Just fixed the bad wheel bearing and a bad ball join on the passenger side. Now the only noise left is the clicks sound when I make sharp turn. Regular turns are normal. CV boots are good. What is wrong?
View 3 Replies
have a 2013 Passat SE and just installed the Audi style headlights that I won on Ebay. But having some problems with them. Turning signals don't work, One of the low beams(HID) burnt out 20 min into driving, and the LED's do not turn on as the DRLS or with the low beams, I have to switch to brights to get them to come on. The DRL is the halogen highbeam...I do not have any VAG COM experience nor do I own a scanner...what should I do?
View 6 Replies
2008 Chevy Cobalt
The fan for my A/c and heat does not turn on anymore. The A/c and heating systems themselves do work because if I put my hand right up against the vent I can feel it. When I switch on the fan, there is no noise, no humming either. This happened over the course of two days where first the fan worked fine, then it took a little while to turn on, then it would only turn on if I put it on high and waited a long time, then it didn't turn on at all.
Since then I have not tried to turn the fan on for more than a few minutes to see if I can get it to work again because I'm concerned that the trapped heat or A/c might damage something inside (am I correct?).
View 1 Replies
4WD will not work. the front differential will not engage but the transfer case does.
View 2 Replies
So I went to get in my car this morning and the key fob wouldn't unlock my car. None of the buttons work, I tried them all. Now someone would say ok... why don't you just open it with the key? Well I'll tell you why! My car was part of the ignition switch recall and when they swapped everything out at the dealership, the guys didn't cut me a key to go with my door. So the key that starts my car is not the same one that unlocks my car. I walked up to Autozone thinking a quick battery change would do the trick. The guy tested my fob with the indicator thing they have and said "this is fine." I explained my problem and he said he could sell me a battery, but he wouldn't want to if that's not the problem. Could it be something with the communication? In which case, what does the fob communicate with in my car? I can't even get into my car!
View 19 Replies
My truck makes a weird noise when I turn right.
View 2 Replies
2001 Chevy Impala. Blinkers only work occasionally. I suspect it has something to do with the tilt steering causing a short in the connection. Just bought the car and trying to work out some of the bugs.
View 2 Replies
