Century :: 2003 - Dash Lights Not Working Sometimes
Jan 18, 2014
I've got an '03 Century with some "issues." There are times when the dashlights work, and times when they don't. At first I thought the issue was with the headlight switch itself due to the fact that the dashlights were operational with the "auto-on" feature; but it seems that is not the case.
I can turn the lights on, and the headlights themselves will operate, but not the dashlights. Just today, I turned on the lights using the switch, and had dash, lights, but on the way to work, I lost them. It's not just the main dash that goes black, but all of the lighting lit by the headlights being turned on.
View 7 Replies
Advertisement
I have a 2003 Chevy Impala LS with 120,000 miles, equipped with sentinel lighting. Recently, the instrument cluster lights along with the lighted controls on the door panels and steering wheel stopped working leaving me unable to see the speedometer while driving at night. All controls seem work properly. I did some internet research and it appears there are several causes and/or fixes out there. I would like to have one or two more probable approaches than just throw money and time at a trial and error approach.
View 9 Replies
I am working on this 97 F150 with the EOTF. It is not doing anything. When i turn the key on, no light on the dash comes on. When i operated the 4wd switch, nothing happens, no lights on the dash, no relay clicks or transfer case noise, etc. It has a new t case motor, the switch tests out good. I have researched for a while, and either find people with different symptoms or the original poster never updated with what the fix was. I am unsure where to go at this point, i am suspect of the GEM or the t case relay, but don't want to go replacing stuff without a basis for going so. Ive tested for voltage at the switch as well and it has 5 volts at pin 3.
View 13 Replies
Brake lights do not work. The turn signals work, the flashers work, and the running lights (head lights) work. I checked the bulbs and both filaments light up during the above processes.
I removed the brake switch at the pedal. When I was removing it, I heard some clicking under the dash. I connected the 2 pins with a wire (bypassing the switch), and got a spark a few times along with the clicking sound like a relay,and the brake lights would come on, but now nothing. No sparks, no clicking. The flashers and turn signals and running lights still work.
There are no blown fuses in the fuse box to the left of the steering column. Is there a relay somewhere under the dash just for the brake lights?
View 7 Replies
My truck is a 2007 F-350 DRW. I'm not sure when,because I don't use it much in Texas, but My Four Wheel Indicator lights on the dash quit working. I don't see them in the dash at startup either. I'm not sure if the four wheel drive is coming on at all. There is probably a way to check that without driving off into a mud bog, right? Anyway I have looked for blown fuses etc, no luck yet. (15amp#33 under dash and 30amp#3 under hood). These are according to my manual.
View 2 Replies
1997 Plymouth Grand Voyager SE 180K 3.3L
I read other threads about the connections under the hood, both sides, which I unplugged and replugged. I also pulled the IOD fuse for a little bit. Then I removed the cluster and looked it over. Looked good to me.
Got code P1698 for manufacturers assembly control or something to that effect. Thought I checked all the usual culprits. The dash lights work fine, so does everything else. The dash gauges just don't work. This is something that has been an intermittent problem with the dash gauges going out periodically when hitting a bump. It leads me to believe a connection. But I checked all those.
View 14 Replies
I took my euro switch from my R and put it in my GLI and than put my GLI OEM switch in my R. After doing this now my gauges, radio and window lights are not working in both cars. I checked the fuses they are good and I even bought two new euro switches and still having the same problem.
View 4 Replies
The backlights or whatever they are called that light up my spedometer and fuel gauge, etc, are not functioning. Other lights such as engine, oil and park/neutral/drive work just fine, as does every other electrical system as far as I can tell. Is there a specific fuse that I need to check, or does this warrant a trip to a repair facility?
View 7 Replies
I have a 2000 Kia Sportage and the dash lights and running/parking lights are not working. The 10 Amp fuse for the tail/running lights keeps blowing. What could be causing these problems on this year, make and model car and where I should look to find and fix the problem? I am trying to find and fix these problems as fast as I can, but I am not real sure as to where to even start looking.
View 3 Replies
Tail and dash lights would go out unexpectedly, so I would turn light switch off and then back on and they would work. After about a week they stopped working all together...I checked all fuses related to the lights and dash as well as bulbs.
View 5 Replies
Noticed this afternoon that as it got dark outside, all dash and door lights aren't working.
The gauge cluster lights, VERY dimly, but delays by appx 2 seconds before coming on? Only switch light that still works right is the Red ring on the Headlight switch.
Again this is all lights, except lights in headliner work fine, gauge cluster lights very dimly with a delay?
View 5 Replies
So I just got a new car tonight (01 Jetta 1.8t) traded my tdi for it. They failed to tell me about the lighting problem. The dash light (blue ones that light up whole dash) only work sometimes. Don't work when headlight switch is on (have euro switch) but they will work sometimes if you put the left blinker or hazard lights on. Illumination for window / lock controls are glowing red, same as all the buttons by the vents up top of the radio, ac / climate control lights not working. They did end up telling me that they swapped the other car they had (2L golf mk4) and they swapped in that dash and it worked no issues. Do I need a whole new cluster?? Or is there something I can try to fix it?
View 1 Replies
We have a 97 Dodge Ram and the park and dash lights have quit working. We have tried four new(not factory) switches with the same result - no lights. What else should we try?
View 5 Replies
Have a 2000 excursion V10. Cruise wasn't working when I bought it. There are no lights on the dash that come on and I changed the switch on master cylinder. What to do. Fuses are good
View 2 Replies
can getting a new battery put in my 98' Monte Carlo mess with the dash lights to stop working?I really dont know if they were working prior , I just got it on Monday
View 2 Replies
Dash lights are not working in my 78 F150. The climate control lights come on and are dimable with the headlight switch. I pulled the cluster and the Blue/Red wire has voltage. Which might be the ground? The Seat belt light comes on at start and the left turn signal will blink. What am I missing. Oh the cluster is deteriorating. some of the bulb holes are chipping out.
View 1 Replies
I have a 2004 Buick Century and the small window that indicates what gear you are in, on the dash, is very dim. All other dash lights are bright and working good. Is this the bulb and what sort of job is it to change it.
View 4 Replies
Have a 2004 Buick Century and the light that shows what gear you are in is out. Is it the bulb or what? Can it be a fuse?It started going off but came back on later Also how hard a job is it to change the bulb.
View 2 Replies
I just bought a 2005 Elantra GT 5 speed. Nice car but the dash lights (including the radio and climate control) don't work. All fuses are good the rheostat (dimmer) is fine. Checked the continuity from the dimmer to the back of the dash instrument panel all checked OK. Light bulbs are good.
Basically it appears that I am getting power to the panel lights, yet they don't work. The radio appears to be stock with a factory plug. All other lights and electrical gadgets work fine. I can not find a schematic to check grounding.
View 6 Replies
I have a 2003 santa fe and the blinkers are not functioning but the hazard lights are working fine. I checked the fuse and that is fine. Is there someway I can take apart the handle assembly where the switch for the blinkers are? Also, sometimes they would work and other times they wouldn't so that seems like a loose connection somewhere. The indicators for the blinkers on the dash do not work either so there has to be a problem giving power to the switch.
View 8 Replies
2004 Excursion 4x4 6.0. I just had the fuel injectors & wiring harness replaced and it runs great, but after 30 minutes of driving the complete dash lights/gauges stopped working. I found that the #45 10amp fuse had blown so replaced it and after 20 minutes the same thing happened. While it was working all of the lights & gauges seemed to be working okay. This doesn't effect anything else, still starts & runs okay, turn signals work, head lights work, but the head light auto on/off doesn't.
View 4 Replies
