Camry :: Make Doors Automatic Up And Down?
Jul 16, 2014
Is it possible to make doors automatic up and down on all 4 windows? I have a 2003 toyota camry le 2.4L 4 cylinder. My driver door is automatic down only not up so I was wondering if I can make that automatic up also and to make the other 3 doors auto down and up wondering how much it would cost me to do that since I like to open the windows on a nice breezy but not cold summer heat.
Is this the right LED kit for my camry? The reason I am asking is I see no reviews. [URL] What do they mean by DRL LED Projector Headlights. Is it the white lights? I don't like the yellow light on my camry(standard lights)
View 6 Replies
Advertisement
I recently purchased a 2009 XLE V6 and love it! I've also owned a 2008 Corolla S and 1994 Camry SE V6.
I do have a question however. In the 2009, both front doors make a very loud clunk when closed as if a very large piece has broken off on the inside.
View 5 Replies
I have Toyota Camry 2009 . My automatic lock doors stopped working at all. But it was long process, first all passengers doors sometimes opened, sometimes closed(I mean button on the doors didn’t open or close doors, remote control also didn’t open or close doors). Then they stopped function. 1 month later drivers door stopped working too. Now I can use only old fashion way. I made my research and I think I have to replace body ECU because it response for automatic door locks(but it cost a lot). What it could be?
View 7 Replies
I have an automatic Jetta and just hit 130,000 miles. Recently, my car would randomly after I turn it on and put it in drive, the car would jerk forward and make like a popping noise. Then the car drives fine as usual. As if the gears are slipping? Is this a sign that my transmission is going out? What else can cause this? What should I do?
View 2 Replies
When I lock my doors my factory alarm no longer beeps to acknowledge it is set. If I hit the panic button the flashers flash, but there is no sound.
Previously I would have to open and shut the hatch on my car periodically to get the alarm to beep, but that no longer works. I checked the central locking fuses and the alarm fuses (two 15v's buried under covers above all the relays). Those are fine.
If it were just the beep no working after locking the doors I would guess the hatch switch, but there's no sound from the alarm on panic (and the horn works fine).
View 24 Replies
I came back from a vacation of 10 days and tried to start my 2007 Prius and it was not starting when I had the key in my pocket (as it used to before)...The automatic doors, windows etc were not responding as well to the remote...
So I inserted the key physically and it came on with the Malfunction light and then beeped for a few seconds and then that light went away as well...I pressed the on off button to turn off the car...
I ejected the key and then reinserted it and now it is not even showing any indicator light...
View 19 Replies
I would like to know if there is a way to activate the automatic door locking when leaving the car, my car is oiut of warranty and i remember that i had that option on my car, but for some reason, i doesn't now. I've tried leaving the fob far from the car, but the doors does not locking automatically for any reason.
View 5 Replies
I have a 2007 Hyundai Santa Fe and over the last 3 weeks I have been having a lot of trouble with my door locks. One thing is my automatic lock that happens when you hit 14mph, every time I hit 14mph my doors sound like they are locking 4 times, and every time I stop and take off again they sound like they are locking 4 more times. It is driving me crazy. Another issue I am having is my back passenger side door doesn't always unlock with the FOB or the button on the driver door, it has to manually be unlocked.
View 12 Replies
I have a 2003 Camry with the 2AZ-FE in it. It has just under 300000 kms on it and is really starting to make lifter noise. Now i know these engines do make ticking noise but I can tell that it is getting progressively worse. I phoned local toyota shop and they want 900 in labor to adjust valves no parts. I know this engine has no adjustment other than swapping lifters to a different size. I am just curious to see if this is worth it on a car with so many miles. Would I be better to drive till it dies then buy another motor or head? Also kinda worried about stripping head bolts in the block if i do change the head. How common is this?
View 1 Replies
2012 Camry LE I4, 4000 miles, 5 1/2 months old.
When cold after first starting, there's a very noticeable hesitation for a second or two when it makes the 5-6 shift at around 35 mph. I'm fairly sure it's 5-6 because if I hold it in 5th, it doesn't happen till I upshift to 6th. It almost seems like it's some kind of "in between" gears friction, like it hasn't quite let go of 5th but it's already started going into 6th. It's way less noticeable when the engine's warm.
The other issue is a bit of surge and hesitation in cruise control. It won't let you engage CC below a certain speed, around 25 mph. Faster than that, CC can be engaged, and I assume that if it's programmed to let you engage at that speed it should work properly. I have a daily drive on long stretch with a 35 mph speed limit, and I engage the CC. I can feel the engine surge and back off, surge and back off the entire time. OTOH, I can hold it at 35 with my foot, and no surging. I assume it's the interaction of the CC and the auto trans.
Is it worth even mentioning these issues to the dealer? In the past, I've had cars in for subtle problems like this, and they've first tried to persuade me that it's normal, then if I persisted, spent a fair amount of time with the car and didn't find anything. (I'm not referring to any specific dealer here). I don't want to waste a lot of time with the dealer for no results.
View 12 Replies
I have a 2010 Camry Se with the JBL system (non-navi). I usually listen to Chinese songs and the display does not seem to show Chinese characters. I've test drove the Sonatas and they display it quite well.
Is there anyway to make the system display Chinese characters? a setting or something in the headunit? or even an update from the dealer? I would imagine the system is similar to the ones overseas..so I assume they get to display the Chinese characters as well? Lastly, is it normal for the songs not to scroll when the car is moving? Even listening to the radio sometimes prevent the system to scroll or even display the correct info about the songs.
View 1 Replies
As i kid i hated seeing people make there turn signals blink faster but know as i got older I like it, so on my 2011 camry and i want to make the turn signals blink faster. Not too fast but a little faster. I know I need a flasher but i can't find one for the Camry. I know I have to remove the instrument cluster.
View 14 Replies
How to make the fog lights stay on at any position. i tried finding the fog light relay but couldn't locate it.
View 1 Replies
Just changed the engine oil on the 2012 TCH. I didn't pay close attention when I took the larger O-ring off the plastic canister and when I was putting a new one on, I wasn't sure where it fits.
There's a wider notch at the bottom of the threads. The new O-ring (Toyota Genuine) was a little bit lose fit in this spot, but this is where I put it as there seemed to be a angled bevel at the base of the filter mount where the canister fits into the engine. I did oil the O-ring and the bevel on the canister mount on the engine with new TGMO 0w-20. It was tightened to 25 Feet Lbs as listed on the plastic canister, but I could hear the friction with the O-ring. No leaks from what I can tell after the fill.
Then there's base of the flange on the plastic canister that sits flush to the base of the engine. The ring fit tight in this spot but then would be pinched between the engine and canister flange such that the canister flange won't make contact with the engine at all. I don't think this is where the larger O-ring should have gone.
Any pic of where exactly the large O-ring sits on the plastic canister?
View 5 Replies
is there a way to make the center LED brake light brighter? (such as replacing them with brighter red LEDs or something?)
I was following an identical 2009 Camry today and never realized how dim those center brake light LEDs were.... the car in the next lane was a Chevy something and its center LED brake lights were retina-burning bright!
View 12 Replies
How to make the 2012 Camry SEV6 turn signals do the little 3 blink for changing lanes, llike the newer ones, or the corollas do... Is it impossible???
View 14 Replies
So i cave a Clunking noise and feeling coming from the steering column every time i make a slow turn or when i am driving trow ruff roads. I can feel it through the steering wheel.
View 9 Replies
Our 1995 Toyota Camry shakes and makes a loud rattling noise while driving, but not every time I drive the car. The rear seat of the vehicle, especially feels the shake. The rear tires have been replaced and aligned, but still the shake/noise persists. Our mechanic has not been able to recreate the noise. It has occurred in the winter and summer with or without the heater and/or air conditioning on or off. Sometimes the shaking is so severe, I am afraid of what will happen, but I will stop at the next light, sit for a minute or two, and when the light turns green, the car goes, no shaking involved - everything is fine. I typically drive in town so speed is only 45 mph or less. The car has only 137,000 miles, and is well-maintained.
View 2 Replies
Just to start off im new to the camry family.I have a 2007 camry se. Well the the problem I am having is when i make a sharp turn or hit on the brakes hard my oil light flashes. Didn't know if this is a big problem or something small. the light flashes and goes rite back off.
View 14 Replies
2002 camry. The car will not accelerate. The throttle body makes a clicking sound when pedal is depressed.
So.. I took it apart and cleaned the contacts in it. In the mean time located a spare throttle body from a 2003 from a local yard. The old throttle body has a part number 22030-28030 and the replacement has a part number 22030 0H010. The replacement throttle body wouldn't even move when the pedal was depressed.
I put the old one back on.. and now it doesn't click anymore but the car in Park only revs to 2000 rpm's. Its not sticking or having any mechanical issue.
I checked the parts site for Toyota and the replacement is the new number. Superseded. Does the throttle body after replacement need to be reprogrammed? Or whats the deal. I wish I was more Toyota literate when it comes to this.
View 1 Replies
My 2003 Toyota Camry has over 100k miles. I believe the previous owner never changed the transmission fluid because it look black and smell burnt. I took it to an auto shop for them to drop the pan, change the transmission fluid and filter. How do I know if changing my transmission fluid and filter resurrected or killing my transmission?
View 19 Replies
