I decided to put white LED lights in my map light(the front 2 light) and after I put on the bulb I turn the light on and all my interior light including my dome light went off. My car clicker the trunk, alarm, door lock, and unlock doesn't work either so how do I fix. I don't know if I blew a fuse and I can't check as I don't have my car manual.
View 11 RepliesOne of my interior bulbs had blown and all of the others was still working ! I replacement the blown bulb and now none of the work!!
I've had a look thought the manual and cannot find a fuse for this, how to sort this.
I have a 1997 ford f-150 flareside 4x4 and the interior lights have not worked since I purchased the truck.I checked the bulb and it was burnt out so I replaced it and still does not work.
The truck was hit on the 3rd door on the passenger side before I bought it and I think they may have done something to keep the interior light from coming on by accident when not shutting the door all the way.
I checked the number 14 fuse which is where I think the interior fuse it on this truck, what I could check to be my problem?
Just notice that the interior door handle light up amber color at night. Need to modify this bulb on the door handle enclosure? Any complications removing the door panel or other parts to access the bulb? Last of all, what type of bulb?
View 4 RepliesMy alarm and interior lights dont work after a vled installation. Basically when I was installing the interior LED's and I had the Map lights working and as soon as I tried to replace the Dome light my map lights, my Map lights lost power including my OEM alarm failed to work again. What to do because I atleast need my alarm to work....
View 4 RepliesI have an '06 Camry, which has lost all power functionality. The follow items just stopped working
1. Key fob -- keyless entry and alarm stopped working
2. high beam doesn't come on when headlight is on. However, when headlight is off, it comes on--go figure
3. Power door lock also does not work, even from driver side door. Have to lock all doors manually
4. Interior lights don't come on when door is open.
So I switched out my bulbs to standard LEDs. I was changing the back map lights when they all turned off.. I thought the timer just ran out but now they won't turn back on..
The rear light in the truck, map lights in the front and the side map lights.. Did I short something? I don't see how as to I wasn't holding anything metal in my hands.. I did have an issue trying to get off the back map lights (i gave up), but not my lights won't turn on....
Ok, so i replaced my map lights with some led's (2011 Camry Le) and now they won't work. My dome light works fine as do my other lights, only the map lights don't.
I've been searching online everywhere to see which one is the fuse on the diagram. I've looked at both the one under the dash and the one under the hood. All I saw was one labeled "dome" and even checked that one and it wasn't blown? Which one it is on the diagram?
Replacing the daytime running lights on 2005 passat. Can I purchase the bulb from an Autozone or the like.
View 3 RepliesLife long fan of Toyota cars. Drove all cars above 250 K miles. The only way I lost them is through minor accidents or just donated them. Just got a 2004 toyota Camry with 165 K miles( it may sound a lot for others , for me its just beginning) . The Shifter light is out. How to replace it.
View 2 RepliesI own a 2007 Camry LE and one bulb behind the temperature dial is burned out. It is the bulb for the indicator on the outside edge of the dial. I am curious how to remove the panel and rotary dial to access and replace the bulb. I've searched the forums but cannot find a description with pictures (hope I didn't miss it somewhere).
View 6 RepliesI want to replace the interior reading lights but not sure how to do so. I've taken a flathead screwdriver and popped out the plastic cover and revealed three bulbs. Am I supposed to twist them or pull them straight out? Or am I doing this completely wrong and should i pop out a cover or something?
View 1 RepliesI just had the clutch replaced and immediately noticed the door open light on the dash wouldn't go off. I tried all the door, hatch and hood to check and it stayed on. Even if I turned off the interior lights, the interior marker light on the bottom corner of the passenger side door only will stay on, the drivers side goes off. I already called the place where the clutch was done and he said to bring it in and he'll take a look at it....which I'm doing today..... What the cause could be. Maybe the door switch is faulty?
View 1 RepliesI decided to replace my interior light bulbs with LED's. I started by swapping out the overhead lights. There is one bulb for the dome light that lights up when the doors are open. That light works fine with the new LED bulb. But the two bulbs for the map lights won't work. When I was installing them my screwdriver touched somethings and made a spark. I figured I blew a fuse but all the fuses under the dash don't appear to be broken.
Why is it that the door ajar dome light works but the two map lights wont turn on? Are they not on the same fuse? Is there a fuse in the fuse box under the hood that I should check? I also noticed that my radio has no power. Fuses looked good. The wiring seems fine. The lights worked before I swapped the LED bulbs in. Tried putting the halogen bulbs back in and they still don't work.
I was changing out to LED's but after I swap the bulb the light completely doesn't work .
View 7 RepliesI pulled the TFL pin from the back of the harness plug that goes to the headlight switch (Euro one at that) but not only did it kill the all the dash, console, switch light, but the DRLs stayed. Pin was the 3rd one from the left on the top row if you look at the harness plug as it sits in the car. Thicker gauge red wire.
This is a 2003 Wolfsburg Jetta.
I just got my 2013 Elantra in Pearl White GLS Preferred Package about a month ago, and since then the interior lights fuse has blown twice. The first time I took it back to the dealer and they replaced a fuse. It then worked for about a week or so and they're out again. Also, the passenger fog lamp keeps just blowing bulbs.
View 8 RepliesOkay so I was trying to change my rear reading lights, but the lights started to flicker on and off, I thought the connecter was loose.
Stupidly I took metal pliers and bent the connectors a little closer to each other. And now the interior lights don't work =.=
Could the metal pliers on the metal connectors have blown a fuse or something?
I installed my dome light, map light, and rear license plate LEDs with no problem a couple of months ago. When my LEDs for the vanity lights came in today, I immediately went to install them. The first one on the driver's side was installed without a hitch, but after I installed the second one on the passenger side, none of the interior lights worked. The only difference in installation I can think of is that I disconnected the light on the passenger side as opposed to keeping it plugged in on the driver's side.
View 6 RepliesAll of my interior lights went out. Except for dome lights etc. Here's a more detailed description. Every light effected by the dimmer on the left side near the ECS button don't work. I'm assuming it's a fuse.
Cluster gauges still work fine. The lights just don't work.
Note: Both headlights are out so I don't know if that could be connected in some way. Haven't been able to change them yet.
So, which fuse this would be? I can't seem to find it. Or if it could even be a fuse?
I have a 2003 accent and i no longer have interior lights or a door chime working..
I did have a electrician friend change out my hatch last week and pretty sure he shorted out the fuse. I can't seem to see what fuse it would be all seem good
From me checking around i am lead to belive the it could be (shunt connector, memory fuse, power connector, joint connector m31) multiple names for the same thing.
How would i check this? How is it removed?