Camry :: How To Measure The Down Pin Size
Apr 13, 2015
How to measure the down pin size? I need to grab some spacers for mocking up the head to be sure the inserts are lining up. Was going to go to Lowes or HD to fine some sleeves before the ones from Toyota came in.
View 1 Replies
Advertisement
I have to determine whether the BBK can fit my car right.
How to measure and determine whether what wheels size can fit a 6pot Brembo BBK, let say on 19"x8.5" offset 48.
View 1 Replies
For the first time in 3 months, I received the TPM fault message. I used my VW Digital Tire gauge and 3 tires were 30psi and one 33.5 psi. I added air to all of them. When I went to retest the pressure, I used the VW digital gauge and then an old stick gauge that I had. There was a difference of 4psi. The digital gauge read 34, the stick read 38. I then went to the local gas station and they tested it with their equipment. Theirs read 40psi.
What do you use to do an accurate measure of the pressure? I don't know what to believe. Is there a reading in the MFI? (The MFI showed me 0.0 on all 4 tires, cold and warm when the fault appeared, the symbol with the slash thru it. That's gone now since I drove awhile).
View 24 Replies
I have a 2007 Toyota Solara SLE Convertible. Three of my wheels are bent due to hitting various potholes over the past year as well as hitting a curb. I want to replace these wheels with other wheels of the exact same size so that I can use the tires that I already have (since I just bought them) and so that they do not rub on any other part of the wheel well or hub. I have concluded that the size is 17" x 7", that they 5 lug nuts at 114.5 mm. However, I cannot determine how to measure the offset. I have read multiple threads about which offset they are (some say 45 and others say 50). I just need a definitive answer so that I can replace them seamlessly. Its a BUMPY ride right now.
View 2 Replies
I just changed my oil yesterday, and I tried to check the oil level via dipstick method, but oil was all over one side of the dipstick, which in turn looks like I completely overfilled -- I checked how much oil I took out, which was 4 quarts, and I filled it up 3.5 quarts so far. I'm sure the car is still a bit under, and I'd rather overfill than underfill, but how am I supposed to get the "right" amount with such a faulty dipstick?
View 12 Replies
I'm wanting to put a set of 20's on my 2007 camry but I don't know what size tire I should buy.
I want the as much side wall as possible.
Im scared of highway damage cause doesn't have the best roads.
I have 235/65/16s on now and its on the verge of rubbing.
View 1 Replies
just recently purchased an R32 and wanted to know which filter size the r32 uses ? i have never changed a stock filter before because i have always had a cold air intake but have decided to keep the stock air filter on this one.
View 10 Replies
What size is the pitman arm nut to steering box in a 1998 suburban? Some one said 34 MM. Don't want to buy the wrong size of socket.
View 5 Replies
I would like to know if it is possible to put biger tyers in width not size. On my Suzuki??
View 1 Replies
Just purchased a 2010 Prius with 17's (after market) rims. Wondering now if the change in rim size/style will cause my MPGs to go way down.
View 13 Replies
I just bought a 2010 Prius II and was wondering what size wheels will fit on it. What is the minimum offset I can go with a 17x8 without having the tire scrape the fender when I turn the wheel all the way to make u-turns?
View 2 Replies
What is the size I would need to pursue this?
View 18 Replies
Which wheel lock size was OEM on a 2009 Passat? I checked my trunk last night and couldn't find the key. I know it'll be catastrophic if I get a flat and don't have one...
View 1 Replies
What is the size bulb for the Fog light. I search but nothing come up.
View 2 Replies
I'm thinking of making a custom short CAI for it and want to know what size coupling I need to get to fit the stock MAF housing...
View 4 Replies
What is the proper socket size for the oil filter housing?
View 2 Replies
whats the size of stock exhaust? Is it 2.25"? Also what type of flange does it use in the axle back exhaust?
View 14 Replies
I'm going to be putting on some H&R street coils and I want to do just enough of a drop so I get the best performance and I'm wondering how big of a drop that would be so that it doesn't ruin the turning and handling
View 6 Replies
Looking for info about changing stock 15x5 to 16x7?
View 11 Replies
Some folks swear by a 5/16 8 point socket, of coarse I dont have one, so I want to make sure b4 i buy anything. Looking at adjusting the 2nd gear band on a 72ish C6 ... As you know its a square end bolt, I dont own the correct square end socket either, so any direction would be groovy
View 1 Replies
'm a former 2004 Jetta GLI owner...looking to get back into the game with a 2013 GTI. One thing I'm confused about is the GPS screen size. Many of the cars I've seen, including my friend's 2013 GLI has the RNS315 with a very small display. On the VW website it shows a much larger display in some of the photos, and I'm pretty sure I've seen a larger display on some of the GTI's I've seen in my neighborhood.
View 3 Replies