The wipers on my Camry windshield are making a scraping sound as they sweep. I replaced the factory motor & transmission four years ago with one from a wreck. Working fine til now. How can I deduce it's the motor and not the trans - or the other way around. I did remove the complete unit and oiled it up. The problem remains. The motor hums nicely. The transmission arms do not rotate easily by hand.
View 4 RepliesSo over the past week of driving my new 2011 RX350 I have had the auto wipers set to on so when/if it rains they automatically come on. However at random times when there is no rain the wipers come alive an make a sweep across the windshield.
View 14 RepliesSo I've had my 2015 IS250 for only 7-8 months, and it happened to rain in CA. My windshield wipers were put to use, but the wipers make loud noises. The rubber does not seem to wipe the glass smoothly or quietly as it skips or drags when the wipers go up. Will the dealership fix this at no cost?
View 3 RepliesI have a 2012 LS 460 and when I select intermittent wipers the wipers make 1 sweep and then nothing '
View 7 RepliesI have a 6-cyl, 2000 Camry that is making a scraping noise from the right rear brake. After driving it for a while I put my hand near the rotor and it was hot. The other side wasn't. I changed the pads and rotors yesterday and it's still making the noise. I'm guessing that there's something wrong with the caliper. Do I need to buy a new one? Can I rebuild the current one?
View 6 RepliesI just noticed this happening on my wifes car the other day. It almost sounds like the windshield wipers are on high. Here is a link to the video where you can distinctly hear it. Also is that the inverter whining over there in the background? That's normal right?
View 15 RepliesI noticed that the driver side front wheel makes a metallic scraping noise while the car is turning right. It sounds like something scraping the rotor or shield behind the rotor ( a rotational/moving kind of scraping noise)
This only happens on a relatively sharp turn (wheel is turned 70~80% to the right). I don't suspect the power steering as there is no noise if the car is not moving even when wheel is turned to extremes. The scraping noise happens at any speed, as long as the car is moving. does not happen when car is turning left.
Note that I am 90% certain it is from the front... my ears may be playing a trick on me (kind of hard to listen precisely while driving). Where to start looking?
Was about three blocks from home when the front of the car started making a horrific metallic scraping sound as the front wheel turned. I mean LOUD. Did a quick look for something stuck in the wheels somewhere but nothing. It's not like a branch stuck in the wheel sound, but scraping a shovel on a steel beam kind of sound. Braking seems to change the makeup of the sound, but did not stop it. Parked it in the garage.
I pulled the left wheel off, looked and looked, and looked. Nothing. Fear and sadness setting in. Everything looked normal....except....a faint line on the rotor very near the inside edge. Got a mirror and looked some more, and there, wedged on the inside edge of the pad's metal part and the rotor, was a rock the size of a bb. At most. Got a small screwdriver and hammer and popped it out. Done. Sheesh.
Seriously it was so loud it was amazing. So store in file folder for future reference if needed.
The line can be felt barely with a fingernail and is half the width of a pencil lead, and goes under the innermost 1/8" of the pad. I'm thinking do I want the dealer to pull and turn it, or is it going to affect my braking at all. Pretty much gonna leave it be I think.
I have a 2.4L 2003 Camry. No modifications other than a new HU that's been in place for years. I do also have a Sirius radio that plugs into 12v socket.
About a year ago, the only speed that will work for my windshield wipers is the high speed. Every now and then, i can use the other speeds, but they will only work for a few seconds. Recently, I was driving the highway, and out of nowhere, with the wiper switch in the OFF position, my wipers started working. I had to switch it to the fast speed a few times then OFF to get them to stop.
Thinking it was a motor issue, i first took both arms off, then ran the wipers. They work perfectly. It's as if as soon as I put the arms back on, they become "too heavy" for the motor, and won't work in any of the other settings (I guess that's the best way that my mind makes sense of it.
I also experience the door lock issue (sometimes using the key fob will only lock/unlock 3 out of the 4 doors)...
Have a 2010 Camry XLE, 47000 miles. I'm beginning to notice a weird, almost like "scraping" sound when I go from reverse to Drive with the wheels turned when it's cold. It only seems to happen when it's cold (sitting overnight in a garage). Once the car's warmed up and even allowed to sit for 8 hours in a parking lot in the sun, I don't notice the sound. The sound isn't horrible, nor is it loud, but it's definitely a noise that shouldn't be occurring.
View 2 RepliesWhen it rained recently, the windshield wiper started making a loud squealing noise whenever it would wipe down. When I would spray the windshield fluid, the noise goes away but returns when I stop. No noise when it wipes up or when the rain is light drizzle or very heavy. So only noisy when rain is medium to heavy.
I thought maybe something sticky got on the windshield so used a regular glass cleaner multiple times but it's still noisy. What it could possibly be???
02 LE, I've been hearing it before and after i had my windshield changed. I know there is a TSB on this but I need to know how to fix....
View 3 RepliesWipers will not turn off unless the car is turned off?
View 9 RepliesMy windshield wipers stick to the windshield. It's like turning them on full speed when dry. They drag like hell even in Monsoon like conditions...
What gives? Faulty wipers? Bad arm position?
windshield wipers stopped working after driving through a large puddle.
View 1 RepliesI had a new windshield installed today. After the install was completed, I checked the wipers, and they no longer work. I called the installers, they came back and took the arms off and put them back on. All wires appear connected, though I have not checked voltage. I have no rain sensor. The rear wiper still works. It's an oem windshield...
View 8 RepliesSince Day 1 grime has been collecting on my windshield despite many wiper-washings. Base 2011 GTI.
View 24 RepliesThis is on a 2006 GS3. I don't know if this is how it's always been, but after I picked up the car from service at the lex dealer yesterday i especially noticed that the windshield wipers don't go all the way down when they are off or at the "bottom" of the wipe motion. especially the one on the passenger side - when the wipers are idle it's sitting maybe 3" above its base if you understand what i am trying to say. Is this normal? or is it just now i am noticing this. it's not really in the way to impede my vision but i just find it odd.
View 14 RepliesStarted the car up this morning, went to turn on the windshield wipers to remove dirt from the window and they did not turn on. What possibly could be the issue?
View 9 RepliesWhile driving, the windshield wipers on my 2000 Saturn sometimes come on without me turning them on and they continue to operate for several minutes after being turned off. What is causing this and is it an easy fix?
View 1 RepliesI failed my vehicle inspection today because I have scratches left over from some old windshield wipers on the driver's side. I didn't own the car when this happened. I don't want to spend hundreds of dollars on a new windshield, and the scratches aren't that deep at all (I ran my finger over the entirety of the scratch and barely felt it). I'm scared to go to any windshield repair shops because I feel like they'll lie and tell me the only choice is to replace my windshield (which I can't afford). I attached some pictures. I was thinking maybe a buffer or some type of gel?
Attached Files :
IMG_2131.JPG 157.99KB
IMG_2132.JPG 239.94KB
IMG_2133.JPG 230.72KB