I put a new wiper mechanism in my 02 Camry, and I think I left something out.
The wiper motor is in there swishing away and the wiper blades aren't moving. I removed the mechanism and found that the small arm that makes it all rotate keeps loosening. It's a nut which I'm sure needs a spacer or something to keep it from unscrewing itself.
I have a 1987 Nissan Pulsar NX with odd wiper behavior. Sometimes the wipers work for a few minutes to a few days at a time, other times they won't turn on at all. They seem to work best when it's not raining. And sometimes I'll turn them on (just to see if they work today), get no response, turn them off again, drive for a few minutes and the wipers will suddenly give two or three swipes - with the switch still off!
Since we've replaced the wiper linkage and the wiper motor, all that's left to replace is the wiper switch, but that is proving to be much more complicated than expected.
No one has parts for this car. I was able to locate the wiper motor and linkage, but I can't find a switch anywhere. My questions:
1. Does this sound like a switch problem?
2. Any leads on a switch for this car? I don't want to buy one in a junkyard, as it will probably be as old and worn out as the one I'm replacing.
I've been having trouble with my rear wiper since forever. Every time i try to use the washer fluid for the rear, it doesn't squirt right and fills up the motorized lock for the trunk and malfunctions the lock for a day or 2 until it drys. I had this same problem with my old 1.8t gti, just in that case i had to have the whole lock replaced due to the damage from the washer fluid (luckily the dealer payed for it).
I was thinking maybe swapping it out for the polo rear wiper on ecs tuning.
My auto windshield wiper function has become real sensitive...When driving in the lightest rain or even mist, my wipers start intermittently, then go faster and faster until they are going steadily, and in medium-light rain, often go to high speed. They never did this in the past, this has recently started. I turn them off, then back on and the process repeats. The auto wiper was always wonderful in the past, but not now.
Is there some kind of adjustment for this problem? Is my windshield sensor going bad?
This is for a 2003 GTI, 89,00 miles. Every time I try to use the windshield cleaner the fuse blows for the windshield wipers. I have tried to put in a 25 amp fuse and it worked for a while but still blew. The windshield wiper motor has been replaced.
View 2 RepliesI have a 2007 Toyota Camry. The wiper arm on the driver side is not moving while the one on the passenger side is working fine. I thought the wipers went bad and changed to new ones but the problem is still there. Is there something wrong with a motor?
View 3 RepliesI have this 2005 Camry since 2010 and never had any issue. Yesterday, I used wiper and the driver side moved slightly. The passenger side wiper blade went over it. So I checked and the driver side arm doesn't move at all but the passenger side is working fine. Winter is coming here and it'll be terrible without working wipers. Is it something I can tinker on?
View 9 RepliesI have a 2006 Camry LE. It seems as if the wipers on my Camry are not wiping as far as they should/could. Specifically, the driver's side wiper only wipes to about 4" from the edge of the driver's/left side edge of the windshield.
This wasn't so much a problem in the rain, but in heavy snow, it leaves a pretty severe blindspot in the driver's left side of the windshiled. It seems as if the wiper should wipe at least another 2-3" further to remove more rain/snow from the windshield and give the driver a better line of view.
Further, when the wipers come back down, they come to a "clunk" as if they were coming down too far. Is there an adjustment for the wiper arms/wiper motor to allow them to wipe more of the windshield?
When it rained recently, the windshield wiper started making a loud squealing noise whenever it would wipe down. When I would spray the windshield fluid, the noise goes away but returns when I stop. No noise when it wipes up or when the rain is light drizzle or very heavy. So only noisy when rain is medium to heavy.
I thought maybe something sticky got on the windshield so used a regular glass cleaner multiple times but it's still noisy. What it could possibly be???
When I turn off the wiper blades on my 1997 Toyota Camry they do not return to the home or lowest position. They stop at whatever spot they happen to be. The wipers work OK on both slow speed and fast speed. Also the intermittent function is no longer working. In this position the wiper blades operate cintinually in the slow speed. What could be the causing this problem? Could it be the wiper switch on the steering column, the wiper motor, or some other component such as a fuse or relay?
View 5 RepliesI have a 2004 Camry that has had ongoing issues with the Charcoal Canister over the past 3 years. The first time we came across this issue the car threw codes that indicated the Charcoal Canister had to be replaced. Our mechanic said it had to be done and there were no after market parts for this canister. We paid the $800 for parts and labour and had it replaced. Then 13 months later the car began throwing codes again. I had the car looked at again I was told the Canister would need to be replaced... They felt it was likely caused from the intake filter housing cracking. Each time our car does this the codes can be cleared for a bit but the car takes forever to fill and slowly over time you can no longer fill the car as there is so much pressure. This time I bought a used part and replaced the canister. This has happened again..
So we have now replaced this filter 3 times in three years. Can I ask how this canister continues to get gummed up? We live on dusty roads in the country but none of my other Toyota's have had any issues with this. How these canisters are getting gummed up? Is there any way for me to change this Canister myself if I buy them used? I saw in a video on this forum where the user shows putting the car up on a hoist and lowering the exhaust to get to the canister. Do you have to have a hoist? I am wondering if I can achieve this with the car on a blocks? My original mechanic said the rear suspension needs to be taken apart to access the canister? Can I ask where the dust is being drawn from to clock this filter to begin with? I have also been told you can try blowing out the lines? How to attempt this?
The a/c on my '05 Camry still puts out cool air, but not really cold anymore. I compare with my '08 Highlander that can still freeze your arms off in no time. We have had a warm spell lately, which is supposed to continue for another week, and while the Camry is putting out enough to eventually cool the air, it's just not up to it's usual standard. Are these a/c systems supposed to be sealed, and if so, is a leak the most likely reason ? I have not had it serviced in the past 3 years I've owned it. Is it worth it to try the "do-it-yourself" canned a/c service bottles or should I get the system pressure checked out first ?
View 6 RepliesI have a 2005 Camry with 110,000 miles on it. Bought Toyota because I thought they were supposed to last and be such good cars...speedometer, tachometer intermittently going out along with ABS light coming on...took it to dealer, they said it was the combo meter and oh by the way the water pump needs to be replaced. Then get a call that it isn't the combo meter but the ECU that needs to be replaced and that the part is $1982.00. I have serviced the car religiously at the dealer and am very disappointed to have such problems in a car that is only 5 years old and has been taken care of...
View 1 Replies97 extended cab -three door, The third door for rear access just clicked and something inside snapped loose. Now it won't release and open.
Where do I start to get into the latching mechanism?
will the upholstery come off while closed?
Do I drill the two rivets at the handle to get into it and open it?
Does the latching mechanism on hatch have a little play in it or is it tight. I would like to get some info before I tear into the hatch trim to see if it needs to be tightened up a bit.
View 10 RepliesLast night while driving in the ice and snow storm we had in the north east my passenger side wiper started acting funny was hitting the driver side wiper and not going full cycle. I think there is something wrong with the linkage,the driver side works fine bringing it in for service Monday.
2006 V10
Recently, my I4 XLE camry with abs came up with a cel P0500 - Vehicle Speed Sensor A Malfunction. Where the vehicle speed sensor is located? i doubt this thing's hard to service, but so far i have no luck finding it.
View 13 Replies643 miles on a 2016 Camry XLE, while driving down the road, the BSM warning malfunction warning light came up for the 3rd time in 4 weeks of owning the vehicle. BSM works after restarting the car, but it looks like it's a recurring issue.
I was putting off buying a new car from dealer for years because I know even new cars have glitches and recalls. This is not a HUGE issue, but extremely annoying when the car still smells new and you get a BOINK while driving down the freeway.
I have a 94 Camry 2.2. When I am driving 45 MPH the transmissions acts like it is shifting into N or OD and then the RPMS fluctuate between idle and 1500 or so. Then when I it will shift hard because the car has decelerated. If I stay in the throttle during this it just jerks or lunges.
View 3 RepliesI use Bluetooth to listen to music on my mobile......lately i have seen a issue while using google maps and music together....the audio sound of music sometimes goes completely low when both are being used, even if the maps has no audio output.......But sometimes the music output is loud as it supposed to be and only when there is audio output from maps the music shuts off and but goes back to high volume as expected....
View 6 RepliesHow do I tighten the tilt mechanism on my 2004 Vue? It kept getting more loose with use, and now it hardly locks in position at all. I took the plastic cover off but the clamping parts look like special tooling needed?
View 30 Replies