Camry :: VSC Trac Off Lamps On
Mar 11, 2014
My 2002 Camry CEL came on as well as the VSC Trac Off lamps. I checked the codes and fixed a loose fuel cap, cleared the code the CEL lamp went off as did the VSC Trac Off lamps . . . until I restarted the car and went a few feet - they came back on. Checked for codes but none reported. The VSC Trac Off go off after starting engine and will not reappear until car is moving. Checked most of the reported remedies, brake fluid, tire pressure, etc. but to no avail.
View 14 Replies
Advertisement
I recently had a CEL code for bank 2 cat converter.. I drove the car with the CEL for 8 months and one day the VSC and TRAC OFF light popped on and wouldn't go away. I took it to toyota and they told me that it is because the check engine light is on and once the CEL goes off the others should as well. Well i recently replaced the bank 2 cat and cleared the CEL and iv driven over 300 miles already the CEL has not come back on but the VSC and TRAC OFF light remain ON....
View 2 Replies
I've had this 2003 XLE v6 for several days. Just got new rear tires, to match the almost new fronts.
Drove fine for about 100 miles. Then my conscience told me to get an alignment. I got in the car after the alignment and the VSC and TRAC OFF lights were on. I went back in and got the "they were on when we drove it in" song.
After pressing the trac button several times, the VSC went off, then the TRAC OFF when out. "Oh well" maybe he was not BSing me, so I drive off. Came back on within a couple hundred feet.
Now, it seems they go off right after starting the engine, with all the others, but will come on almost as soon as I drive off. If I just sit there idling, does not seem to come back on.
I should add they also told me the cabin air filter was filthy and had to wait while the put it back in when I declined. After all, I can get it way cheaper, etc. I mention because I have seen some comments about this happening in some models after changing that filter.
So, what did the do? Or what can I do?
View 14 Replies
03 xle 3.0. Recent motor mounts, front lower control arms, LR bearing. All good. Raining. Driving around all good. Stopped for several hours, started up, immediately brake vsc, trac, abs came on. Stopped to get a sandwich, started up again, all are out. Car seems fine otherwise.
View 1 Replies
2003 Camry XLE V6.. As soon as I drive the VSC an TRAC OFF lights go on.
This happened recently: Had low air pressure on rear driver's side tire. Gave it air and it's good now.
The lights still won't turn off. I took it to a mechanic, he checked on the computer, but found no codes. I told him about the deal with the tire and he said that the system might need to be reset or re-calibrated because the stability control probably detected one of the tires had some abnormal movement by hitting a bump or maybe because of the low tire pressure, etc.
How do I reset/re-calibrate or do whatever to turn these lights off?
View 14 Replies
2003 Camry xle 3.0 auto. VSC and trac off lights came on after I plugged in an obdc II checker. A 30 dollar red one.
This happened once before when I had a wheel alignment done but kept pestering the shop till they fixed it.
This time, I had the rr jacked up to look for source of noise and plugged this in, just for chuckles. No chuckles now.
I did find a write up on how to turn it off with some paper clips and fancy finger work and will give it a go.
But, is this going to happen every time I plug in a tester?
View 2 Replies
I have a 2002 Toyota Camry SE with the VSC and TRAC lights that stay on. I've diagnosed the problem to be the left rear wheel sensor. I've replaced the wheel sensor only now I have to do a zero point calibration. How to do a zero point calibration?
View 1 Replies
I have a 2007 Toyota Camry LS that says check vsc system. The check engine light, vsc and trac lights are all three are on. That is a concern but another big concern is that is sometimes runs sluggish and acts likes it wants to stall. ?
View 7 Replies
Vehicle is a 2003 SLE 3.0 L 1MZ-FE V6 Automatic. Problem: Check Engine Light on & TRAC Off Light on. AutoZone diagnostic produced three codes, P0155, all referring to Bank 2 Sensor 1. Was told downstream however after ordering matching DENSO part and then taking said part to a mechanic to install, mechanic tells me AutoZone diagnostic was incorrect. His diagnostic was telling him the malfunctioning O2 sensor was upstream, not downstream. Yet he did not tell me if it was left or right bank. He told me to find out from AutoZone or Advance Auto Parts?.I just want to make sure I get the right 02 sensor so I don't have to go through having the incorrect part installed again then removed just so I can return it to get the correct part. I've been told my car has three sensors, two up front, one underneath. I am aware it is best to get DENSO over Bosch.
View 3 Replies
2002 Camry with check engine light steady on and car shutting off when coming to a stop. Diagnostics revealed error codes P0440, P0441, P0446, P0442 indicating evaporation problem. Found broken closed canister valve. Had valve replaced and check engine light went off. Technician says VSC/TRAC lights were on also when he pulled the car in.
They had not been on before. Now the VSC/TRAC lights are coming on and staying on when the car starts moving. The code is c1336, something about yaw rate sensor. Is there something that still needs to be reset or does this mean that the sensor is bad and what and where is this yaw rate sensor?
View 6 Replies
My sister has a 09 camry le I4 and on her way home her VSC Trac off and check engine light came on. What the cause is ( she checked the gas cap )...
View 4 Replies
My completely un-modified fully-loaded V6 Camry SE is currently in the shop getting the brake actuator assembly changed after almost a YEAR of these lights randomly coming on. There was no rhyme or reason. I'm a tad OCD so if there was a pattern,I'd have found it. Never came on to where they could test it. Said they could do nothing until they saw them. I took photos, but they acted like they'd never seen it before. Finally, as I was just ready to pass the dealership, they came on. I pulled in and they checked and said the lights came on right when I "was going 4mph, on an angled curve with my foot on the brake!"
And after an hour and a half said I needed to leave the car, gave me a warranty rental, and said they'd call me. I called them to learn it was the actuator assembly that was going to be replaced and one would be overnighted in. So I have a 4-cyl rental without all of my perks, like the moonroof, the heated seats, the automatic rear view mirror, back up camera.....what a difference! I'm spoiled after 19 months of my Camry! Oh, and when I first got it, there was a bad musty odor from the a/c vents every time I turned it on. I bought it with 55 miles on it...they said "all Toyotas do that."
I said this is my 3rd Toyota in a row, and I ah do one in the past. Oh, "brand new Toyotas," they said. My corolla was 6months old when I bought it. After 2 years, I traded it in for a brand new FJ Cruiser, then traded that in 6 years later for this brand new Camry. Nothing! Finally, I get a notice in the mail from Toyota re: a/c condenser pan overfills, not draining, and can cause airbag problem! was that stench water in the pan, seeping in through the vents smelling like a dirty rag not enough of an explanation that something was wrong. We had to wait until it could have been an airbag issue? Yikes! Happy that took care of the problem and my new car smell was back in no time. How it goes with the lights!
View 5 Replies
I Installed an HID kit and after starting the car for the first time the check engine light stayed on and shortly after the car started moving the trac orange light came on too.. its a pic of a car with sliding marks below it. What could be causing this??
View 3 Replies
Over the past year on my 2002 Camry, I have had my CE light come on and on the next start, the VSC TRAC lights will flash back and forth and then stay on shortly after moving the car. This seems to happen soon after a gas filling. I can put my reader on and usually find codes 0440 and 0402 which I can clear the CEL but the VSC TRAC light comes back on the next time I move the car. I have taken it to a dealer three times now and they have found no apparent problem and cleared the lights. But maybe the next time I fill up, it happens again . . . but not every time I fill up. I have read about the "fix" by shorting out pins 4 and 10 but I am not comfortable with that right now as there has to be a specific reason this is happening.
View 5 Replies
Just noticed a considerable amount of condensation on the lenses of both fog lamps. Since I rarely, if ever use them, I'm wondering if this will be a problem over a period of time. Does this indicate a flaw that I should address with my dealer?
View 15 Replies
I'm trying to get my fog lamps to turn on when my parking lights are on and low beams are off. I obviously want the foggies to be on when the low beams are on as well, but mostly I'd like to have the fogs and parking lamps on in tandem. Not illegal here in Illinois (not that I'd care anyway...there's enough corruption in the state to overlook such little things).
How to make this happen without a) voiding any warranty, melting anything, and c) blowing any fuses? Pictures would be most useful.
I'm hoping to make an easy fix (take wire A out here, put in slot B here, etc) so that my Sonata looks a little more...unique.
Oh yeah, 2010 Sonata V6 Limited.
View 8 Replies
It just started in the last few weeks. After powering down and opening the doors, the overhead lamps will intermittently flash on and off (in a fairly slow succession...i.e. 5-10 seconds between cycles). I thought the 3 settings were: Always on, on when door(s) is ajar OR always off. I have it set to the middle setting and this oddity has me stumped (maybe I need to revisit the manual).
View 5 Replies
The head lamps on my touraeg flicker every once and a while. I checked the harness connections and they are fine.
View 2 Replies
Can I switch from Regular lamps to Xenon? If so how and where do I begin doing this?
View 2 Replies
I would like to buy a 99 B5, with a 2.8 V6 30V 5 speed GLX. The car is running smooth, accelerates well, but there is a fault with the ABS/BRAKE system. When the car starts up, the ABS and the BRAKE warning lamps are staying on, and the central display says "STOP", "BREMSEN FEHLER", "BERTIEBS ANLEITUNG".
Can I find out the system fault from these messages, or should I get the codes? Does it mean that not just the ABS system is faulty but there is something wrong with the brakes too? I did a test drive, and put on the brakes hardly, and the car stopped well.
And there is an other question..the cluster shows the info in "euro mode" (km, l/100km, german language, etc). I would like to see the info in english, and MPG's and miles, so how can I set back to "US mode"?
View 5 Replies
1. Neither tail lamp lights
2. License plate light works
3. Front parking lights work
4. Both tail lamp bulbs are fine (visual and continuity both check)
5. No power at the bulb socket on either tail lamp
6. Tail lamp ground in both bulb sockets is fine
7. Fuse under dash is not blown
8. All brake lights work fine.
9. All other lights working.
View 4 Replies
