It's a 2001 camry Solara .. When I start my car for the first time every day, I have white smoke come out my exhaust usually for about a minute or two but it runs fine after that. But it's like a cloud of white smoke. I checked my oil and it's fine. What it could be?
View 17 RepliesI have a 2002 Toyota Solara SLE 6-cylinder 2-door coupe. 98,000 miles.
I have lots of white smoke at start up. Big time oil consumption. My wife drives car 14 mile round trip each day. Each night, I go out late and start car to burn off oil. There is no smoke in the morning when I do this.
People here have suggested the problem is valve stem seals. Not something I should try to fix myself. I did change the pcv valve.
I took car to mechanic. Told him it might be valve stems. He said he'd have to do the heads. Sounded like it would be expensive.
2009 Camry 4cyl
I changed my PCV valve over a month ago and still have white smoke coming form exhaust on startup. The smoke goes aways as always, after that the smell is gone and the car runs like normal. The smell of the smoke is not really sweet as if it was coolant leaking, but its not exactly smelling like burnt oil either (I've had cars that burnt oil real bad and it smelled different than this camry).
I've been keeping an eye out on my oil and coolant levels, both seem to be ok. I refilled my coolant tank to full about 2.5 months ago as it was very low and its still almost at full right now. My oil after about 4k miles on the dipstick measures right in the middle of the min and max dots, which it has been for as long as I've owned the car. So these levels are ok I think.
Now, I've read somewhere a while back that after changing the PCV valve or rather after taking the old one off that there still will be some residue to be burnt off. A way to get rid of that is to create a makeshift vacuum by plugging one end of the hose (the one that attaches to PCV valve) and leaving the PCV valve off while running the engine, putting some kind of cloth or similar over where the PCV valve should go to collect all the burnt stuff, thus cleaning the remainder out. Is it possible that this might be the a solution?
Recently purchased a used 2003 Toyota Camry LE. After a recent oil change at the local Toyota dealer we noticed that when we start the car in the morning a puff of white smoke spews out from the exhaust for a few seconds and stops. There is no more white smoke while driving the car around. The car runs perfect and has no power loss. Initially we had noticed it was losing coolant. All the discussion on the internet pointed to a bad head gasket. We had a mechanic look at it and it turned out that the radiator was leaking and hence the loss of coolant. He also noticed the oil was overfilled so he brought it down to the normal level. The mechanic also checked the head gasket and claimed there were no issues with it. Replacing the radiator took care of the coolant loss but the white smoke still comes out only the first time the car is started.
View 8 RepliesI just purchased an '06 V10 a couple weeks ago. Today, I was about 11miles into my 15mile commute when I noticed A LOT of white smoke coming out of the back. The only time I'd seen smoke like that before was just before my old Ford Explorer caught fire. I immediately pulled over and took a look. White smoke (maybe steam?) was billowing out of the exhaust.
I say steam, because it didn't have the strong diesel smell I would've expected. I decided I couldn't sit there parked by the highway, so I got back in the car, checked warning lights and pulled out. Within 1/2 mile, it was gone. Nothing. No more problems the rest of the way. What this might have been? I have 1100 miles on the vehicle and this is the first time it's happened.
I have a ton of white smoke coming from my exhaust pipe only after it ran a long time then is started back up ????
View 7 RepliesLiterally drove the car yesterday for three hours nothing was happening. Went to turn it on today when it idols a little constant white smoke comes out of the exhaust! Then when I'm driving and my turbo boost lets out a big cloud of smoke comes out. What could this be? Also just filled my car up with gas from empty today if that matters
View 7 RepliesI have a 03 Camry, that has started to release white Smoke from the exhaust only on start-up for about a week now. After that I don't see anything not even if i rev up the car.. Only on start up.. WHY??
View 13 RepliesI have a 2004 Camry that I purchased used 8/2006 with 20,400 miles on it. It now has 83,000 miles on it. I’ve changed the oil and filter every 3,000 miles, and I’ve never had to add oil between changes. I’ve also replaced the antifreeze on time, using 5 yr/150,000 mile antifreeze. The only time I’ve had to add antifreeze was 4/23/13, to top off the overflow reservoir. Saturday I did my annual tune-up (plugs, air filter and fuel injector cleaner added to the gas). Plugs looked normal. Last week the car sat for several days, no issue on start-up.
Yesterday afternoon I started the car after it sat for two days. A huge amount of white smoke came out of the exhaust. It ran fine. I mentioned this to my wife, she said that about two weeks ago she saw a lot of black smoke (she thinks black) when she started the car and that it ran rough for about the first 4 miles and then started running ok. It has the 2AZFE engine, and I’ve read a TSB (TSB 1507) “It has been reported that stripped head bolt threads have been found on some of these engines during tear down. When the two rear head bolts lose their clamping ability they allow coolant to seep out at the rear of the cylinder head.” Could that be the problem?
I have a 2003 Solara 4cyl, some months ago it started to blow light blue smoke on start, but would go away after a few minutes. My mech, could be the valve guides. Then about a month ago it blew a head gasket, didn't overheat though, as I stopped, added water and went to the mech. So new gasket and a valve job, but it still blows smoke on start. THe mech said going to 20w50 might work, it didn't. I check the oil last week, thought it should a couple of qts low, so I added oil, but the blue smoke is still there, and I started to smell oil burning. I thought maybe I added too much, so I add another oil change w/20w50....still have the oil burning, blue smoke on start... The mech thinks might be leaking in the rings...ugh....probably could/ve bought a new engine by now...... The check engine light had been intermittent, the mech said it the catalytic converter....it finally went off by itself four days ago....maybe it burned out..........
View 5 RepliesMy car was running rough, with white smoke and strong gas smell coming from exhaust. It died out on me a few times as if it was not getting enough acceleration. Well, I coded it and said misfire cylinder 3 and 4. I also tried to shut down 3 and 4, but did not shut down. I switched 3 and 4 with 1 and 2, still did not shut down cylinders 3 and 4. Engine coils are good, engine module was tested and passed twice. Ok, fuel injectors 3 and 4 were leaky and I changed them out. New spark plugs and boots. New oil and filter..(There was gas in my oil and oil in my air filter.) With the new parts....my car sounds soooo much better!!! still a little rough, does not bog down, but it still has the strong gas smell and white smoke from exhaust..(gas smell soo bad I had to open all doors to the garage!!) What else could be wrong?!?! I'm getting frustrated!! It also has NOT ever over heated, does not run high.
View 7 RepliesWhenever I accelerate I hear a metal clanking noise as if there was something stuck underneath the front of the vehicle. I pulled over and checked the undercarriage and did not see anything and then checked under the hood. My coolant was extremely low and the oil was in a normal range. What could be the cause of this metal clanking noise whenever I accelerate. Also I have white smoke coming from exhaust when I accelerate as well.
View 2 Replies2005 6.0 & noticed on Friday there was white smoke coming from exhaust that started when I'd turn on truck then aster 1st light or stop sign it would be a cloud of white smoke. Once I start to drive it stopped & I didn't see it again that day. I noticed the same thing again on Saturday & Sunday but the smoke was thicker on these days but would stop like the day before.
I had a code come up a month ago which I believe was P404 but read something about EGR valve. So I replaced the EGR valve 3 weeks ago & light never came back.
Today I had a Dr's Appointment and had usual white smoke in morning but once I got to the Dr's appointment the truck sounded like the turbo got louder then usual and started to see cloud of white smoke again. While sitting in parking lot I check to see any codes but nothing came up but the cloud of smoke started.
When I left my appointment, the turbo sounded louder still and noticed white smoke every single time I stopped at a light or stop sign.. Then the coolant level was high with the engine giving me the warning of over heating coolant or something like that.
Having trouble with 6.0 powerstoke white smoke out exhaust. We have installed egr delete and still have white smoke and water coming out of exhaust not as much as before. Took it back apart to see if we did anything wrong everything look ok. We did a compression test on all cylinders they check out ok.
View 6 RepliesI'm losing coolant have, excessive white smoke coming from the exhaust, and rough idle. Doesn't over heat or even try to overheat. The oil fill cap looks brownish white. It drives fine other than extremely rough idle. I know how to check a blown head gasket with the combustion gas test.
From what I've read blown head gaskets on 4.6 fords are fairly uncommon but a blown intake gasket is fairly common. How can I tell the difference?
I have a 12 F150 with the 5.0L. it has 27000 miles on the clock. Noticed twice a small puff of white smoke coming out of the exhaust and decided to check the oil level and it was a quart low. The last oil change was done at 23000 miles and used Full Synthetic Pennzoil and a K&N filter. Called the local dealership I purchased at and they told me NOT to use full synthetic and should only be using Motorcraft semi synthetic with a Motorcraft filter. I know the dealerships will only endorse and advice Motorcraft products but what does everyone else use and think. In the meantime I added a quart of oil and all is fine.
View 5 RepliesMy 7.3 won't start after sitting for almost 2 months, the wiring for the injectors was bad, and the first package was damaged, so I had to order a new one, and wait trough Christmas before I get the new parts. The valve cover seals have now been installed, and all parts fitted. Thieves stole my batteries so I had to buy new ones there as well.
When I tried to start it, it will crank, but not start, white smoke comes out of the exhaust, and glow plugs seem to be fine. One thing I did notice is that the fuel pump under the driver side of car was making a wired noise when turning on the ignition, it was not a constant hissing sound that I used to on my other cars. I poured a small amount of condensation remover in the tank, the tank is half full, but still no start.
After trying a few times, it did sound like it would get better, but that only lasted for a second. Strange problem, I think my fuel pump is acting up, but I don't know for sure yet. The fuel pump did work when I parked it. Could it be a fuse that does it? I checked the hpop to see if there was any oil there, and it was.
I'm pretty sure I have a blown head gasket. I have white smoke coming out of exhaust and the oil is brownish in color indicating radiator fluid is leaking into engine. The car has over 200K on it. I purchased Steel Seal. The guy I talked to from Steel Seal said if radiator fluid is dirty (which it is)than I should flush radiator before using product. I don't have money to replace the gasket and I don't have money for a new car right now. Can this be a fix that gets me through a couple months?
View 3 RepliesI noticed a rough idle after driving an hour with a 6000 lb trailer and stopped at an offramp. Had no performance issues to that point in an hour drive. Then I noticed a good amount of white smoke coming out of the exhaust. The idle felt just like when I had a contribution/balance code on #5 a year ago, and a new injector fixed that. Before long (10-20 minutes later) the idle got real loud, like a big knock/loud tick every revolution.
I had a bunch of stored codes, so I reset them and later found a P0281 - Cylinder 7 contribution/Balance and P0404 - EGR control circuit range/performance were the 2 that came back. I drove it 2 more hours to get home. It ran well under load, but coasting or stopped gave the loud knock, and stopped and idling was a rough, inconsistent idle. It even stalled on me 3 times when braking for a red light (auto trans). There was a lot of white smoke all the time, plus a little dark smoke on acceleration.
What would you recommend for troubleshooting steps? I could put a new injector in #7 and clean the EGR valve, but want to have a good idea that will fix it first. Is there a good chance I have a messed up piston in #7 now?
Codes I cleared:
P0148 Fuel delivery error
P0234 turbo overboost (i know i need to pull and clean the turbo anyway, unrelated to today's issue)
P0281 Cylinder 7 contribution/Balance
P0404 EGR control circuit range/performance
P0670 Glow plug (I had the module unplugged a while ago)
P0683 Glow plug (I had the module unplugged a while ago)
2007 F550 with the 6.0. About 2 months ago I replaced the EGR cooler with a Bulletproof cooler. Truck ran well for a few weeks. Then I started getting the "turbo fart". I stopped using the truck until I had an issue with another truck. I was stuck so I sent the 07 out without cleaning the turbo. This morning a decent amount of white smoke started coming out of the exhaust. The smoke would sometimes get a bit gray. Going up hill it didn't have much power at all.
View 8 RepliesToday I drove to dinner in my 2012 6.7 with no problems then on the way home my brother said he noticed my truck was white smoking quite a bit and he said there was a very strong exhaust smell coming from my truck ( he was in his car behind me) I ran a diagnostic test and what came up was code P0401 (I believe that's right). Need to figure out what is going on with my truck before I take it to the mechanics and get charged up. The truck still has DPFs in it just has a DPF back exhaust and has a AFE cold air intake running on a stock tune. However I do have the DPF deletes and EGR delete sitting in my garage just haven't gotten them on the truck yet.
View 2 Replies