2002 Camry, i was gonna remove manifold & 1st step was to pull relay to relieve fuel pressure(which it did) but then i needed to use car so i put it back now car turns over & immediately sputters-out unless i depress & hold accelerator. Also, fuel in tank is very low, in case that could be culpable.
View 3 Repliesok, i just became the proud owner of a 71 dodge dart.. fuel pump was not working, and am converting to an electric (airtex e8016s) and am told i need a relay. airtex doesn't seem to have one, is there another i can use? fairly new at this sort of thing, but have fixed a 72 honda motorbike, so not afraid of engines or whatnot.
View 19 RepliesMy F250 heavy duty isnt getting voltage to the fuel pump relay.....
View 2 RepliesOur 2012 camry se had a problem with the fuel pump running when the engine was off. Several hours after we came home I went into the garage for something and heard a humming noise. First thought was a distant neighbor using a leaf blower, then realized it was coming from the rear of car. definitely coming from gas tank area. Turned key on, then off and noise was gone.
View 6 RepliesMy 95 aurora 4.0 lost all power to the fuel pump and at relay. what could be my problem. Is there a fuel shut off ?
View 2 RepliesWithout key even in ignition, fuel pump relay clicks constantly every 8 seconds with the gauge lights illuminating during this 8 seconds. The only lights that function are the gauge lights. Upon turning on the headlight switch only the gauge lights illumin8. Absolutely no headlights, dome light or brake lights. No fuel pump sense/pulse. No radio, key on or in accessories.
Multi-function switch was not the issue. How would I troubleshoot this one?
I am looking for the location of the fuel pump relay on a 1997 Chevy S10. There is a bank of relays on the firewall on the passenger side, but I do not have any info on which relay is for the fuel pump.
I briefly looked at this vehicle where they had it towed to after it had stalled on the road and they couldn't get it to start.I had no tools at the time, but not hearing the hum of the pump, and no fuel at the test port on the rail, all pointed to a fuel problem. The owners boyfriend took over from there and replaced the pump this past Saturday and still no pump.
I suggested that he find the right relay and test it, but he skipped that part. Which of those realy are for the pump??????
My 1993 Bonneville SE; fuel pump is not working. I don't know if it's the relay or not. How can I check and where is the relay. I have relays in horizontal line in center of my firewall. I am disabled and don't have any other transport.
View 1 Repliesi have had this problem before where the relay for the electric fuel pump would quit intermittently, and had it fixed. but, i suspect this is acting up again. so, i was gonna do it myself. there are 2 relays strapped to the radiator overflow can. is one of them the relay i am seeking?
What started all this, motor was running really rough at idle, but ran ok once moving. So, I replaced the spark plugs, and cleaned the contact areas in/on the cap and bug. motor started right up, and actually sounded good... for about 10 or so seconds, then it died, like the gas was shut off. I do have spark.
How to check/test the fuel pump relay and could pass this info on to me would be good. i do have test light, and DMM.
My jimmy died on me yesterday on my way home from work...i thought the fuel pump went because i couldn't hear it when trying to restart... I had about a quarter tank of regular in there,,,put in 2 gallons of super and it started, but died again about a quarter mile down the road...got it home with a push...after searching for and checking any fuses i could find...swapped relays on firewall and all seemed well....i heard the pump and it fired right up...went walked, just in case) and got another relay, and now i don't hear the pump again,the battery is a bit low now,,,so maybe a jump would give me enough juice? I'm going to jumper the wires/relay...and be sure the pump is working... I'm sure it is.. 94 jimmy 4.3 vortec 140k I gotta pick up my wife from work later and don't want to get stuck again...
View 9 RepliesA cousin has an old 1994 Ranger. The fuel pump relay, located in the engine compartment fuse box. went bad, so he got a new relay.
Now, it does not plug in securely, so sometimes he has to open the hood and fuse box and wiggle it to make contact.
Ideally, one would probably replace the fuse box, though that would apparently involve a lot of wiring, right?
How to "cob" this up so the contacts will make better? Perhaps something to put in the slots to increase pressure on the blades?
Maybe gently twist the blades so they go in at an angle? Maybe touch the blades with a solder iron and put on a small blob of solder to make the blade bigger? (Though it seems to me that solder is not a good contact material?
Maybe solder to the blades, a very small piece of brass or similar material? Put a piece of aluminum foil over the blades?
1994 Buick Century 3.1
Fuel pump relay is not powering the fuel pump. I was able at one point to jump the orange wire to the gray wire but it will not even do that now. I know the fuel pump works because I can jump from the battery to the gray wire and it will turn on.
I used a multimeter and tested the volts from the orange wire on the relay to the neg post on the battery and it is only reading about 1.3 volts. Is this normal?
Checked the fuel pump 15a fuse and it is ok. I am getting spark. Could it be the crank sensor? How can I test that? (It is above the start I believe). Could it be the ignition control module? How to test? Location? What else can I test with the multimeter and post back with the results to further diagnose?
My plan to clean the fuel injectors on my 2008 Silverado LS 4.8L V8 came to an abrupt halt when I was unable to disable the fuel pump relay because it is missing from the spot where it should be located according to the schematic in the owner's manual. Would removing the "fuel system control module" (fuse #21) instead of the fuel pump relay work?
View 7 RepliesMy '94 4.0L XLT has hesitated to start a couple times lately. Then, after sitting for a week while we were on vacation, the truck would not start at all today.
[URL]
I read about the fuel pump relay, so since I am not made of money, I decided to change that first ($16 vs. $100). After installing the new relay, the truck started! I put the old relay in the box and tossed it into the glove box.
After lunch, and some thought, i decided I wanted to put the old relay back in and see what happened. Guess what! It started with the old relay as well! I also noticed that the humming/buzzing sound the fuel pump makes when the switch is turned on was different with the new relay vs the old one. I put the new relay back in, but now I am unsure where my real problem lies. Intermittent relay, or fuel pump on its way out??
Where the fuel pump relay is in Corolla 2010 le?
View 8 RepliesMy 95 chevy 1500 pickup is having fuel pump issues. Somewhere between the relay and the sending unit. Pulled the tank, and put power directly to both the pump and the sending unit. They both run. Put in new relay, still not turning on the pump. Do not know if this is related, but the switch to turn on the interior light when you open the door does not work on the drivers side door. If I pull on the switch the light will come on.
View 3 RepliesThe relay for the fuel pump keeps going bad. Is this a sign my fuel pump is going ? I just replaced my 2nd relay ( lasted about 1 week ) 1st lasted 16 years. Or is there another issue to look at ?
View 11 RepliesSometimes after running my 94 Limited, it doesn't want to start - it does crank - like it's not getting fuel. I have found the work around and want to know if it would be fixed by replacing the fuel pump relay.
The symptom is just after starting, it starts to run poorly, and then dies out, then will not start at all. I use to keep trying to start it for 20-40 minutes and suddenly it seemed to work.
It seems the work around is to turn the key to on for about 5 seconds and then turn it off - then it starts and runs as good as ever.
So, is this a symptom of a bad relay? I thought I'd start there because of the cost of the relay is fairly cheap. 1994 Explorer Limited 4x4?
- Fuse Box - Part # 3C7T-14A067-DC Engineering Number on white label.
- Ford Dealer Part # 3C7Z-14A068-DB
I have a 2004 Ford Excursion 6.8L 4x4 that has a bad fuel pump relay. I am looking for a used replacement fuse panel.
Of all these number and letters which of them tells me the real part number? Does the last two letters mean anything "DC" or "DB"?
So I don't get one for a diesel, what is the prefix for the diesel? I am assuming the 3C7T is gas and the year model?
Also, will this fuse panel interchange with a F250/F350 6.8L or do I need to stick with a fuse panel from an Excursion?
My diesel suburban dies while driving. It starts right back up. I have changed the fuel filter and checked for water in fuel.
View 2 RepliesI have a 1996 Pontiac Trans Sport 3.4L (without Passkey anti-theft) which on occasion won't start after being parked. The fault only happens when the vehicle has been sitting, it does not die while being driven (so far). The engine cranks normally but does not fire. The peculiar and significant thing about the fault is that the fuel pump relay (driven directly by the PCM), chatters at about a 10 Hz rate. Instead of receiving a steady 12VDC to keep it energized, it is receiving a pulse stream from the PCM.
The first few times this occurred, I heard the relay "chattering " under the hood , and was able to start the van by unplugging the relay and shorting the connector terminals for the contacts together with a wire jumper ( these terminals connect "hot at all times" 12VDC from the PCM fuse (orange wire) through the relay contacts to the fuel pump +ve). The electric pump would run and I could start the engine easily. By the time I arrived at my destination, the fuel pump relay 'drive' would be normal and I could plug the relay back in and continue normal operation.
The last few times this problem occurred, the van would not fire -- no spark as long as the relay drive was pulsing. When it would finally go back to normal operation of the relay, the engine would start OK.
Last Spring in cold weather I had the van towed 2 blocks to a Pontiac dealer with this problem. The problem resolved before they inspected it; however after the Technician's inspection the Service Advisor said there was no fuel pressure at the test port and that the pump must be deffective (shorted), overloading the relay causing it to chatter. That diagnosis made no sense to me. They wanted to replace the fuel pump as the solution ($600). I got past the Service Advisor and asked the mechanic to show me the fuel pressure -- the car started on the hoist when I tried it, and fuel pressure was normal (>30psi). I left with just the relay changed, as they thought the original would have burned -up contacts from excessive current to the pump. (I cut it open later and found its' contacts to be perfect). While at the dealership I asked the S.A. if he knew of any TSBs, or other incidences of this problem; he said he had not heard of this problem before.
I had the same problem one week later, but not again all summer until this Fall's cold and wet weather. I had to have the vehicle towed home and it still wouldn't start the next day. As soon as I accessed the PCM behind the glove box and jiggled it the relay chattering stopped and car could start. However, later the same day, still in the driveway, the fault was back and no amount of jiggling or other manipulations had any effect. Later still I went out to test for spark, and the fault was gone. (Cold, wet weather all day).
Vibration seems to have little effect. I have checked the PCM connectors' security and pulled, twisted and wiggled the wires coming from it, as mentioned above, to no effect. I suspect the fault is inside the PCM and is thermally induced by cold weather. The next time it happens I will try a warm hair dryer on the aluminum housing of the PCM. I wonder if there is a fix for this (repair a cracked solder joint, etc.) other than replacing the PCM. I work in electronics, and will open the PCM up and inspect it before forking out for a new one.