Camry :: How To Program Key To Work With Remote Starter
Mar 25, 2014
I just bought a used 2009 Camry, which has a remote starter installed, but my key will not operate it. From what I understand, the original owner lost the key that was programmed to work with it, and the replacement key does not. I have four keys: one is entirely metal, one is black plastic with no logo, one is black plastic with Toyota logo, and the last one has all the buttons which pop the trunk, and remotely lock and unlock the vehicle. I tried using the key with all the buttons to remotely start the car, but nothing happens.
View 3 Replies
Advertisement
I have a 2003 Camry I4. My RKE stopped working. First I checked the battery in the remote, it reads 3v like it should. I searched and found how to reprogram the the receiver, so I tried that. I did the door and key dance and got to where when you pull the key out and the door locks lock then unlock. I try pushing the lock and unlock button, then just the lock button as per the instructions and I get nothing. Supposed to get one cycle of the locks if it works and tow cycles if it doesn't. I get neither of those, nothing happens. So I buy a new remote off of eBay (brand new, never used, OEM remote). I try the reprogram door dance again and get the same results. The battery in the new one reads 3v like it should as well. So I go off to a junk yard to replace the receiver door controller, I found one and replaced it and I get the same exact results.
View 8 Replies
I had an original Toyota remote starter installed when I bought my 2010 Prius. The dealer informed me at that time that the range was about 90 feet and that I be better with a jobber remote starter... I did stick with the Toyota because I didnt want another remote transmitter key with my keyfob and that the range was not a problem for me...
And winter came and the remote starter was working fine except that on one pretty cold winter morning it did not...and the next morning. It took a while for the dealer to find the problem...
View 12 Replies
I drive a 2007 Toyota Camry, and I am attempting to install a remote car starter. I was told that I would need to get a valet key made in order to do this and I would also lose that valet key. Is this true? Why do I need a valet key made and why will I lose that key? Can the remote starter not be installed without using a key?
View 1 Replies
My remote engine starter has stopped working. It still locks, unlocks, opens the trunk, and triggers the alarm. I have already replaced the battery, with no luck.
View 3 Replies
I was removing a remote starter off of my 04 camry because it no longer worked. After I removed it i noticed that the radio and clock were not working. I checked the blue/red accessory wire on the ignition harness and noticed it looked like it had seen better days. So i decided to make the connect more solid by cutting the weak point and crimping it back together. Now I put the key in and turn it to run and I ONLY get the CEL light, the airbag light and the brake light(parking brake is engaged). I can't utilize the windows, it wont even attempt to crank, the a/c and heat don't work now. I checked all the wires in the area of the ignition harness and all are solid connection (tested with a voltmeter). I have tried to jump start the car with another car as well as unhooking the battery for 2 hours and nothing has changed. I also triple checked every single fuse i can see in the passenger compartment and under the hood and all are good. I also checked the circuit board behind the fuse panel under the dash and everything looked ok.
View 13 Replies
Im currently installing a remote starter on my 07 camry and it wants me to tie into the "parking light" fuse or wire. It is a Bulldog system, on the website it describes it as "Black (-) wire" located at "BodyECU in vehicle fuse box 26 pin plug pin 23" The fuse box cover does not identify fuses by number and i do not see anything that looks to be parking light related.
View 1 Replies
We lost one of the cars remotes, I found online few sellers that sell remote (exact as well as cheaper simpler ones). Is there a way to program it at home without the paid support of the dealer ....
View 3 Replies
How do i program my keyless entry remote to my 99 grand am?!?
View 3 Replies
I have a 200 GMC Jimmy SLE and I am trying to program the new FOD key for it. I followed the listed instructions here [URL] .... and here [URL] ..... but it will not enter program mode.
So, is there another method to try to get it into program mode? I have looked here and else but the only other instructions has to do with pre 2000 series blazers.
View 2 Replies
New owner of a used 2012 corolla. I only have one remote key. After digging through google and ebay. I brought a set of new remote keys with the known warning that I have to take it to the dealer for programming.
What tools to get to have this program by myself. It just cost too much over $150 from dealer just to program a key not counting over $250 dollar for the key itself.
View 8 Replies
I purchased a NEW 2008 Hyundai Keyless Remote on the internet. It didn't come with programming instructions. How to program this remote.
View 15 Replies
The 6 button powercode remote start and alarm will shut the engine down if you open the door after remote starting.
Here is the fix, I found it somewhere else. It's nice doing stuff yourself that the dealer tells you it cant be done.
open the drivers door
turn on the ignition
hold the program/override button for 15 sec (horn will chirp 3 times)
press the override button again horn will chirp 4 times
" " horn will chirp 5 times
" " horn will chirp 6 times
" " horn will chirp 7 times
" " horn will chirp 8 times letting you know you are in option bank 5.
press the panic button on the fob horn will chirp once
" " chirp twice
" " chirp three times
" " chirp 4 times
" " chirp 5 times
press the lock button on the fob once...your led alarm light will now be off.
Turn off the ignition
you are done
Enjoy
Activate the remote start open the door(smile) just don't press the brake before you put key in ignition and turn.
View 14 Replies
I have a 96 buick regal custom. I tried to program a keyless fob through the trunk it dint work and now my lock buttons on the inside of my car don't work but yet they automatically lock and unlock when I turn on the car when I go into and out of park gear.
View 3 Replies
Recently, I've been looking into making a copy of my ignition key for my 2005 Camry SE. I bought a blank on eBay, had it cut to fit my master key, and it works fine for locking and unlocking the doors. However, since it is a Transponder Key, apparently I need to program it in some way to use it for ignition.
I've been looking all over for instructions on how to do this, and have tried this commonly repeated method, with no success:
1. Simultaneously depress and release brake and accelerator pedals 1 time.
2. Insert an original Master Key into the ignition but do not turn it.
3. Within 15 seconds depress and release accelerator pedal 5 times.
4. Within 20 seconds depress and release the brake pedal 6 times and remove key.
5. Within 10 seconds insert New Key into ignition but do not turn it.
6. Within 10 seconds depress and release the accelerator pedal 1 time.
7. Now sit and wait for about one minute until the security light in the center counsel stops blinking and turns off.
8. Remove new key and depress and release brake pedal 1 time.
9. Test your key now. It should work if you followed the instructions. If not, you may want to try the following instructions:
To reiterate, these instructions have not worked for me.
Have any other 2005 Camry SE owners managed to program a key successfully? What method did you use?
View 14 Replies
how to program transponder key in 7th gen camry. There are a lot of instructions online for up to 08' year, but nothing after that.
View 3 Replies
My wife and I recently purchased a 2014 prius c 4 here in Alberta. We have quickly realized that there is no remote starter option. How does one warm there car up and keep the doors locked on a smartkey system? Not comfortable leaving a car running unlocked. Vehicle is parked outside with plugin.
View 19 Replies
I have a 1WARM-PRO Compustar remote starter on my 2006 CR-V. It sucks the charge out of my battery so I have to plug in my battery all winter when I'm at home to keep it charged. Every summer I go to the starter shop to have my remote starter turned off. Up until this year, the guy did something to turn it off that took a couple of minutes and he never charged me. He no longer works there. The new guy wants to charge me because he says he has to go under the dashboard. The other guy never went under the dashboard. How I could do this myself?
View 19 Replies
Bought the 04 Solara with just the Gray Valet key that has the transponder in it.
Valet key will start the car but not lock/unlock the glove box or truck lock.
Do I need a black Master key to program a new transponder key?
or can I do it with the Valet key since it has (I think) the same transponder chip?
View 5 Replies
I had a remote started installed by the dealer when I purchases my 2014 Avalon Limited.
I was disappointed with the location of the antenna. They installed it on the left side of the windshield (passenger side) about 2-3 inches from the top of the windshield. It is in clear view of the driver while driving and is quite unsightly. In past experienced, I have always seen it installed behind the rear view mirror so it is out of sight, but when I questioned the dealer about the location, they said they cannot install it behind the mirror because of the Black dotted area (antenna?) would interfere with transmission.
I am curious if others have had the antenna installed in the same location or in another, less visible area. I am trying to decide if I want to push the issue further with the dealer.
View 2 Replies
I have the OEM remote starter. All of a sudden it stopped working. I hit the lock button 3 times like I always did. I get the confirmation tone but it does not do anything after that.
How I can fix it?
View 10 Replies
