Camry :: Headlight Bulbs - 8000K In Low Beams And 3000K In Hi Beams
Oct 22, 2013
I want to replace my headlight bulbs; I want to install 8000K in my low beams, and maybe 3000K in my hi beams. But all of the bulbs that I ever installed either; A the burnt out within few weeks (lost color), or B they stopped working.
Now, regular WHITE bulbs seem to work forever; but the color ones, burn out/break. Low quality?? I need a pair of very good 9006 8000K, and 9005 3000K. Again, but I don't want to change them in a week or two. I want them to last!!
P.S. 2005 Toyota Camry
View 7 Replies
Advertisement
I have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
View 5 Replies
So it looks like I need 9011 HIRs for my 9005 high beams, but which HIR do I use for the 11F low beams? same?
View 14 Replies
I don't know the official name, but it's right above the high beams, it stays lit if you just have your side lights on too. BTW, what's the purpose of it since we really don't have DRL's?
Modifying it with a different bulb, if so what's the size? Same ones as the interior map lights?
View 8 Replies
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 Replies
I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?
View 5 Replies
My High beams for a 2003 cavalier are not working. I checked the bulbs and they are good, The Low Beams Work and my drls work. I switch from low to high and the blue indicator on the cluster panel comes on.
View 5 Replies
I know the instructions are somewhere, but I am having trouble figuring out how to change the headlamp bulbs (high & low beams) on the easy side-driver side. Do I need to loosen the headlamp assembly or can I just go into the headlamp assembly without removing it?
View 3 Replies
I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
View 2 Replies
After spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-
1. Changed the headlights out just in case both bulbs burnt at once.
2. Changed the blinker stalk in hopes of a faulty switch.
3. Changed the headlight switch to a brand new OEM Euro style switch.
4. Checked all fuses (did this first actually).
View 6 Replies
The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.
Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?
View 13 Replies
It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.
View 5 Replies
Prior to me switching out the high beam bulbs, they were both aiming correctly. After I switched out the bulbs, both high beams are aiming up in trees literally. They arent even close to lighting up the street/pavement. I was wondering if I may have installed them somewhat cockeyed but I thought it was odd that I would have done both of them the same since they are both equally up in trees/same overall height.
View 2 Replies
So I own a 96 Dodge Dakota and its had a few problems since I first bought it, but its all fixed except for one really puzzling problem. My head light will flash on and off while on low beams after about 30 minutes (if on high beams its almost instantaneous). It all started out with my dash lights going out then the head lights would go out when driving. I checked the switch and plug, both were fried, so easy enough fix. That fixed the dash lights, but the head lights still go out. I replaced the bulbs and yet the problem still exists. I then took it to O'Reilleys and the put a volt meter to my negative battery post and to and auxiliary wire just 6 inches from the post. When the lights were on they produced around 46 ohms of resistance and when they shut off they produced 26 ohms. Which isnt good, so I replaced the negative battery cable to try and fix the problem. This still did not solve it. The only other suggestion I have been given is to replace the high/low beam switch on the steering whee. Could that solve the problem?
View 9 Replies
So about a 2 weeks ago my drivers side headlight went out. I figured it was the bulb (even though I had just replaced them about a month prior). Got new bulbs and nothing. I checked the fuse and it was not blown. I made sure the electrical connections to the bulb weren't dirty and were connected properly.
Then last night my passenger low beam went out. I had changed the bulb when the other side went out 2 weeks ago. Its still brand new and not blown. I did the same thing, the fuse is not blown and the electrical connectors are clean and secure.
I just took my car into the dealer about a week before the driver's light went out and did their "Major Service". They did tell me that I would need to replace my battery soon. Could this be the cause?
I drive a 2011 Hyundai Sonata SE 2.4L
View 4 Replies
My 2007 Dodge Caravan has only one working headlight, the passenger side does not work on high or low beams.
At this time I'm wondering if the problem is in the headlight plug itself, because there are no other complications other than the passenger side not working.
The light did work at first on high beams but now not at all. replacing bulbs makes no difference. There is some brown discoloring on the white strip on the plug face, nothing like this on the driver side.
Also hoping that the problem is not the relay or front control module.
View 3 Replies
I know this mod can be done on other models of Toyota, but for 6th gen Camry? And no, I won't leave the high-beams on when oncoming traffic approaches.
View 1 Replies
I've ran into an issue with my high beams on my 07 Camry SE. All lights are working except high beams. When you switch to high beams the lows only stay on. The dash light comes on and shows high beam indicator, but no brights! Fuses look good, and so do both bulbs. Going to go buy a bulb later today just to try. Like I noted they both just suddenly stopped. I'm leaning towards dimmer switch on column now.
View 11 Replies
Yesterday, I went through my car doing a complete LED conversion. I got everything done. And then I replaced my high beams with Silverstar Ultras. I didn't touch my fog lights or my low beams (these will come next.) And then I went and got some wings with the boys, showing off my new LEDs and my bright high beams. We noticed that my fog lights turn off when my high beams were activated. A cool point I never knew about, but, it is extremely relevant in this story.
This morning I went to work, and noticed that my fog lights were not working. So after work, I came home and tried everything to get them working, check fuse in car, and tried every combination of light to activate them. Then I checked the fuse box under the hood, I hadn't actually ever looked in there before. When I did, I noted that the 10amp fuse, Fog R/R was missing... MISSING. I took the spare from the cover and put it in, and bam, fog lights work again.
View 2 Replies
I love this car- i just bought it , but it has one problem i cant figure out .The high beams didn't work at all -till my mechanic figured the prior owner took out the two fuses - now they stay on all the time - even when the car is turned off . My guess is the light switch - my mechanic said it is probably more than that...
View 3 Replies
I recently noticed that the high beams on my car are actually pretty dim (38k miles with them.) I've looked online and it seems fairly easy to change out the bulb but I wanted to know if there any specific bulb brand recommended and also I wanted to know how to add fog lights since I live in a part of the country where it snow alot and its foggy in the summer.
View 14 Replies
