[URL]....
These replace the fog light assembly totally and they have like 5 leds or something like that..
The fogs are technically useless too me and I think these look hella unique (at least better than hids in a way).
New to the MK6 world and the halogens they have.. I am used to having Xenons... My question is there a way to run DRL's and fogs together?
I know there's a way to wire the city lights and fogs to run together, but I love the way the halogen DRLs look and i would like to run them together with the fogs. I do have a Euro switch.
I'd like to run my DRL's and Fogs at the same time in auto mode. Currently if you have the headlights set to auto and turn on fogs it enables the regular headlights as well. Id like only the U shaped DRLs and the fogs.
View 2 RepliesI was on youtube and saw a video, of a guy running fog lights as DRL's and only the fog lights, how to do this, or how to on the foglights independently?
View 2 RepliesMy buddy Mark and I followed the directions to VAG my moms DRL's so they dont come on anymore, but now the lights illuminating her garage door opener and the lights around her shifter do not light up, did we do something wrong or forget something?
View 2 RepliesAfter euro switch is installed on mk4 gli, the parking lights still remain on with the front fogs.The switch would be in the middle position. So the DRL's are off and just the parking lights are on until the switch is pulled out into position 1. Then the fogs come on and pulling out into position 2, turns the rear fogs on.
View 3 RepliesSo I just picked up an R32 and it has a euro switch and euro projector headlights but I've noticed that my parking lights, city lights, and front fogs are all inoperative. Though the turn signals do work. I tried doing a quick search but wasn't really able to come up with anything as to a reason why.
View 7 RepliesI know this mod can be done on other models of Toyota, but for 6th gen Camry? And no, I won't leave the high-beams on when oncoming traffic approaches.
View 1 RepliesI purchased a set of HIDs for my 2010 SE fogs last week from DDM Tuning and couldn't wait to install them. Since I purchased my low beam set from there, it made a lot of sense to get the matching pair from them too. Anyway, after the install, all was working fine. I did a few test sessions to make sure they would turn off and on the way they were supposed to and they passed.
As I am driving home from a friends house (shortly after the install), I realized that my switch was turn to ON and not AUTO. I turned my switch from ON to AUTO while driving.. After doing so, I noticed that the road in front of my were not as bright as they were before turning the switch. I pulled over and saw that my fog lights were no longer on.. I played with the fog light switch switch, turning them off and on and the only light I would see go on and off, was the one on my dash (the fog lamp indicator).
I have since switched ballasts with my low beams and STILL.. NOTHING. I don't understand what happened and why BOTH fogs have gone out?!? I checked the 10A fuse under the hood that is linked to the front fogs and it's good. I checked the HID bulb and it looks to be burned out, BUT I also plugged my stock halogen H11 bulb into the socket and NOTHING. That puzzles me more..
I see heaps of cheap LED DRLs (audi style) at car accessory shops that say they wire up the the 12volt parking light switch thing, the problem is where this is or how to do it?
View 1 RepliesI have a 2003 Jetta. I would like to have my parking lights on all the time, controlled with ignition (without any headlights), & have my headlights only cone on when I turn the headlight switch. Is there an easy way to do it?
View 2 RepliesAll of a sudden the front left lights and both fog lights stopped working. It must be a fuse or a loose connection.
View 6 RepliesHad the tail lights coded for at a local shop.. realized as I was leaving that the reverse lights are throwing an error. Can these be coded for? Now that the car recognizes the tails as LED, is the error coming from the incandescent? Should I replace the bulbs with low pulling LEDs without resistors? As for the fog, do I have to replace the bulb as well? No euro switch or wiring done. Basically, how do I get rid of the error.
View 3 RepliesI purchased a used set of JDM HID/LED fogs awhile ago and had them installed by a buddy of mine who owns a shop. The HID portion was plug and play, but I cannot figure out how to get the LED portion to light up outside of tapping into the parking lights. It came with a DRL switch with a number of harnesses attached and a ground wire. I dropped the panel under the steering wheel and cannot see anywhere to plug it in. I reached out to the few people who have installed these, and contacted a number of sellers, but have not had much luck.
Do the LED portion has a harness to plug into on a US Spec car?
Light
Instructions I got from someone. It says there is a harness, but no one has been able to confirm if the US Spec vehicles have it
Video of DRL switch : [URL] ....
I recently bought some lamin-x tint for my headlights and fogs. I have only seen a few ppl on here tint their lights, but it was only the the tailights i have seen done on here. So I have an optic blue for the headlights and med gunsmoke for the fogs. Just came in yesterday so I will try to get them on within a week. I will post some pics to show how it looks.
View 14 RepliesI have 2010 Camry front windshield fogs Up than i press defroster. Before fog on front windshields clears up after pressing front defroster button. Now it doesn't work.
This fogging only happens at night after I turn the A/C on. Front windshields fogs Up than i use the defroster no use still the front window is fogged up.
I don't like how they aren't in the middle of the slots of the front bumper. Where the chrome strips are. I wish they were in the middle of that, instead of towards the outside.
In this video the technician shows that there are holes that you need to drill. This allows you to fasten the DRLs to the bumper.. can I drill the holes in the middle? Would it look stupid up close?
[URL] .....
I just installed the lights and found that only the outside left light worked with the brake depressed, the outside left inside left and inside right worked with the light switch in the on position. Also both blinkers work.
I switched my byte 18 to 04 already and am not (as of now) using my euro light switch (I didn't think this would be it but I'm at a complete loss) ...
I had a bottle of Draino spill on my passenger seat, and now I have these big white stains that don't come off.. and the Draino ate through my seat cover. How do I get this fixed? Do they sell the seat cover as it comes with the vehicle OEM?
View 1 RepliesDo the dip tube/fuel pickup tube inside the fuel tank is replaceable? The tank I have is a behind the seat tank.
View 1 RepliesMy dad has a 97 Dodge Neon 4 cylinder. The car has been leaking oil, and on Sat the leak grew and was real bad. He took it to the only shop he could find open who put it up on the lift and said the leak was coming from the front of the engine. On monday they did the work ($286) and told my dad it was a seal on the front of the engine behind the flywheel. My dad is old and doesn't hear well and the mechanics english was not real strong and his writing on the recepit is not real clear. As I am worried my dad might have gotten taken, is there a replaceable seal on the front of the engine that could go and cause a leak? They showed my dad the leak as the car was on the lift and running as that was only when the leak occured. I am concerned my dad was taken. He says he drove it around and such and didn't see any leaking when he picked it up and left it running in his drivway for a while upon getting home and no leak. Just wondering?
View 11 Replies