The front bumper keeps detaching from the clips on the side. Toyota has attempted to fix it 3 times with no success. The clips are not broken or cracked. The clips are the same on late 2012 Camry.
View 3 Replies I have an 05 Passat and I'm trying to remove the bumper cover so I can get to the crank bolt. I have all the bolts out but cannot get the three clips removed from where the grill attaches to the bumper. I can see them with a flashlight but can't get them released with a screwdrive.
It's not covered in my manual. How do I get them released?
Wondered if others have had a problem with spots of paint peeling off front bumper? Bought car new and have 42,000 miles, rest of paint is in great shape. It is not terrible, but like keeping car nice, would be nice if covered under warranty. Been this way for awhile, maybe should have taken it in, haven't even mentioned it to Hyundai.
View 5 RepliesDealer did repair work on front bumper. Now, after reinstalling a new front bumper, I noticed water starting to form inside the fog light assembly after it has rained. Dealer says this is normal due to our tropical weather. This has never happened prior to the repair work that was done.
View 12 RepliesSo I've seen a lot of people on here wrapping the mid section of the front bumper black to give it a more aggressive look.
For those that have done this, will I need to cut a hole for the sensors or will the sensors still work with the wrap covering them?
i was looking to get the front lower bumper (fascia) from the SE
i have a 09 LE,
my question was does it just attach clean onto the LE? or do i need a se front bumper.
[URL]
I have a 2012 SE v6 with 1600 miles on it. About a week ago, I noticed my bumper cover pulled away from the corner of the headlight and there was a noticeable gap. I pushed on it, and heard a click. The bumper stayed in place. After a couple days driving, it came loose again. I didnt touch it so the Service Writer would see it first hand. Of course, his first instinct was to puch on it, but I got loud quickly, so he kept his hands to himself, and heard me out. I knew if he clicked it back into place I would be SOL. He admitted something needed to be done, not just click it back.
When I picked it up, he said it was a known issue, and there is a TSB on it. He claimed they replaced a bracket. The invoice reads, "ADDED FELT TO TIGHTEN FIT". Yeah, Im sure that will hold just long enough for them to wash their hands of it.
I see some wires dangling in the front bumper which looks like fog lights plugs but I don't get it so is it just plug and play buy a new bumper with fog lights or something? My car doesn't have fog lights but it looks like there is wires for fog lights.
View 10 RepliesI took apart my front bumper for my 2012 Camry SE a while back and swapped it when I hit a cone on the freeway.
I accidentally lost one of those metal nuts that goes underneath the bumper - its like a hexagon if I remember correctly. - I had to use a torque wrench to open them and there was like 8 or 10 total.
How to remove the chrome trim around the fog lights and the chrome bars beside them I have a 2014 SE
View 2 RepliesI have a rental 2012 Avalon for two weeks. Yesterday I noticed extensive scratches at the front/right corner of the front bumper. The scratches could be covered with two hands. Some scratches are as deep as the primer, but not on the plastic.
I am pretty sure that they are not there until last one or two days ( it has been raining, they would not be very visible when wet). The scratches looks kind of old, could it be that they were fixed in a substandard way so that they are washed off in the rain and became visible?
Have a continuing problem with the front brake pad antirattle clips? Mine keep bending or rusting and prevent the pats from retracting. I live in a high salt area but still I shouldn't have all the problems I do.
View 1 RepliesChanged the spark plugs on my 2006 Camry today. Everything went smoothly and quickly except for the fact that I broke all the little keeper clips on the connector plugs that connect to the coil packs. I called my Toyota dealers and one said I had to replace the entire wire harness. The other found the connector plugs for around $8 each. Will the broken clips be a problem with the connectors eventually coming off from vibration if I don't replace them? I'm not sure how to replace the connectors if I go that route. How to go about replacing the connector plugs?
View 7 RepliesI recently installed a new stereo in my 2003 Camry. While deciding whether to get a bluetooth option, I messed around with the drivers side pillar cover, which is where I would have run the bluetooth wire/mic, had I decided to go that route. Anyway, I took the pillar off and I guess the clips that held it on broke off? It was never 100% "attached" so to speak, or so it appeared. Even before I took it all the way off the top part was a little loose so I think that clip was broke off already. When the cover came off I noticed that the 2 spots where the clips attached appear damaged as well, but I can't tell that for sure as I don't know what it would look like undamaged. Also, part (or what appears to be part) of one of the plastic white clips came off too. I was planning on attaching pics, but posting rules for me say no attachments...
a. Is the cover broken as far as being able to hold new clips on?
b. If it isn't broken, where do I get new clips?
I have a 2011 f250 sd that I removed the front grill and noticed 3 of the clips that hold the lower part of the grill in (bolts on the top) are broke. I went to the local Ford dealer for the clips and was told I have to buy the whole complete grille for it. The parts breakdown doesn't show the clips sold individually from the grille.
View 2 RepliesAbout 10 inches of the rubber around the windshield is becoming detatched. It looks really ugly and I have unsuccessfully tried to glue it with loctite...
View 7 RepliesLooking for info on these replacements and is there any manuals out there to assist with the process?
View 1 RepliesA day before 3 yr service and MOT test on 7 seat 2011 Santa Fe, a noise from the rear offside wheel. Advised the garage to check and they discover the handbrake shoes were detaching from their mountings, not wearing out but detaching. This has apparently happened before causing someone's wheel to lock up and the vehicle recovered to the garage.
Strange that the same garage has seen it before so it must be happening elsewhere.
Cross pond Translations....
handbrake=parking brake
MOT = annual government safety test
Shoes = pads / linings
Rear offside = left right rear
I have a 2013 Accent GLS and I have to replace the rear bumper cover. Any detailed instructions on how to do this?
View 2 RepliesHaving problems with the paint chipping on the rear bumper? Dealer said on the phone paint is only covered if it rusts. Will bring it in tomorrow for them to check, but I'm not getting a good feeling that they will cover it. Car has only 3500 miles on it! Bumper shouldn't be chipping like this.
View 18 RepliesI have a 2013 Lexus ES350 and the left edge of the rear bumper keep pops open during the hot summer days. The first time I saw this gap between my bumper and the frame I thought someone has hit my car's bumper. After close inspection, the bumper is smooth as butter just like the first day I brought the car home. I took the car last Saturday to a Lexus dealer for an inspection. The service guy told me there is nothing he can do and maybe bring the car back on a weekday so their diagnostic guy can take a look.
View 6 Replies