Camry 2012+ :: How Stock Rims Sink In Fender
Sep 25, 2015
I have a 2012 Camry se v6 lowered with eibach springs and I don't like how the stock rims sink in the fender. I was thinking about putting 20mm spacers on the front and 30mm on the rear that should put my rim lip flush to outside fender.
View 7 Replies
Advertisement
Installing plastidipped their 17" stock rims? Looking for pics and just brief info about it? Like how many cans? I have a CGM Camry SE and just wanted to change my rims up a bit.
View 1 Replies
Thinking about changing to a 16" rim for ride comfort/less road noise.
17" to 16" rims.
using (stock tire size)
p215/55r17
668mm height
p205/65r16
672mm height
How much improvement in ride quality should I expect?
Current tire,
Bridgstone Turanza el400-02
p215/55r17
668mm height
View 14 Replies
I am looking to get a set of spacers to go with the stock "S" rims. My car is dropped on 9th gen S-Techs. How much of a spacer should I go with to push the stock rims out a little. Im not looking to get anywhere close to flush I just want to get rid of the awful space.
View 1 Replies
I just got a new set of rims and it seems the rims don't have the tire monitoring gauges on them, is there a way I can install these new rims without messing up the tire monitoring system or I cant install them at all. Also will this void any of the factory warranties on the car.
View 7 Replies
I have a 2007 f150 XLT with 18 inch stock rims. I also have a 2 inch leveling kit, how big of tires can i put on it?
View 6 Replies
Planning on changing my stock to HID. how to install them. I looked around the web and I couldn't find anything. I have a camry 2013 SE. fog lights already installed and it has a plastic cover underneath.
View 10 Replies
I just purchased a 2012 Camry, unfortunately the radio is the stock display audio unit, without navigation, satellite radio capability or Entune. Is it possible to upgrade these components and have them installed or would I need to replace the entire unit?
View 1 Replies
I bought and installed stock g37 wheels today and I get vibration at around 50mph+ ! Could this mean i need hub ring adapters?? I believe the offset is 45 on the new rims. They are 18s.
View 3 Replies
I have doing some modifications to my 14' Camry that include the following:
I saw on a Honda Civic one day a very deep blue bulb on his factory DRL's. I am assuming it's shared with his high beams? I loved the color and I'm not worried about sacrificing the high beam for this bulb. Looking for deep blue bulbs that are plug and play for my Camry? This is primarily for aesthetics.
View 4 Replies
My friend has an 07 Camry with the factory steel rims and they are always such a pain to get off. They never come off easy at all. I bang & bang & bang on it lightly on the tire & on the rim & after a few mins it will come off. It is always like this on all 4 tires! The first time I worked on his car all 4 tires were stuck on good, and it took me almost 45 mins just to remove the 4 tires. So before I put them back on, I cleaned up the rust and I put some anti-seize around hub snout and still they are pain to get off. I have other cars with steel rims and they all come off easy..Why such a pain with the 07 Camry steel rims?
View 2 Replies
Not sure if this has been asked/done before but would the 2014 R Like fender flares fit onto my 2012 SE? I have the opportunity to buy the flares off of the 2014 but I wanted to make sure they fit without modification.
View 4 Replies
I have a 07 Camry XLE, and recently got a great deal on some almost new 2010 highlander 19in rims, the rims are excellent... they have been balanced 2 times by hunter road-force machine and that seem to lower just a bit the vibration at speeds upward of 50mph, but not significant. 4 new tires are 225/40/19. my mechanic checked for bearings,Axel, etc. everything good, the rims are not warped/bended, no damage. air pressure checked..
I contacted a couple other Camry's with them on at car domain and I'm awaiting a reply. Is there something else that can be done about the rattling, intense vibration at high speed ? or just deal with it?
I have the minimum spacers in front because by the rim installers the rims would rub against the front calipers.on my original XLE rims i had no vibration what so ever.
View 14 Replies
I have a stock 2012 F250 6.7 Diesel. I was looking at getting new 18 or 20 inch rims for it and was wondering what the largest tire I could fit on those without rubbing on the truck would be. I know there are lots of topics on this but I could not find anything that applied to me. Most topics were on stock wheels.
View 1 Replies
Last year an 8pt buck ran in to my driver door and bounced off the fender of my '05 Camry LE. I was able to get it into the shop Jan. 17th and got the car back Jan. 29th (driver door shell was replaced and fender repaired).
Since then my car has been making inconsistent "errr . . . errr" sounds on the highway going 65-70mph from the area where the driver door and fender meet near the base. Best described as metal rubbing metal. From what I can tell:
1) the sound produces the most on long highway curves to the right going 65-70mph
2) the sound produces the most on warmer days (40 degrees was the warmest we've had here in MN) and on days like today where the weather is 8 degrees I can hear it once in a while but very inconsistently.
3)The exterior looks fine from what I can tell.
4) suspensions and engine are all fine
I have taken it back to the shop and they seem very doubtful the noise is due to their repairs but I am positive that this noise did not exist until after it left their shop. One of the reps even sat in the car and heard the noise while we drove on the highway. They initially blamed the car noise on lug nuts that were placed on backwards which I knew was an excuse to get me out of their shop. Sure enough as soon as I took it out on the highway the noise was still there.
View 6 Replies
I purchased a used 2003 Echo last week. The all season tires are on 15 inch rims. I would like to buy snow tires for this car. The question is - snow tires on 15 in rims or snow tires on 14 in rims? I understand that 15 inch rims was an option selected on the original purchase. Without this option, the car would have had 14 inch rims.
View 14 Replies
i just got a 2008 FEH 100K paid 11500 out the door 12800 is that a good deal? everything is clean. It has the upgraded sound system but i noticed that some feh have the mpg displayed on the screen it look like the feh with navigation not sure if this is seperate from nav or just part of touch screen. in any case is it possible to just install the stock dvd/nav stereo to get the mpg avg screen? if so is ther a guide
also is there a good read around here for new feh owners? looking to get the most mpg out of this ride.
View 1 Replies
I am trying to swap out my stock license plate bulbs on a 2012 Prius.
After getting to the bulb socket holding thing, I have read that you're supposed to turn it 1/4 counterclockwise and pull but mine is stuck and won't turn either way.
View 7 Replies
Have a 2012 E350 with the single disc CD & 6 speakers. For you guys who have replaced your stock head unit, what inputs or connections are available on the back of the stock unit? I'd really like to be able to control the volume with a remote, either wired or wireless.
View 1 Replies
I bought a wall mounted tire rack and its maximum weight capacity is 300 lbs.I need to know how much a stock 15" wheel weight including the tire. I don't have a scale.This is for a 2012 Corolla.
View 2 Replies
I bought my truck as a 2012 base XLT model, with no Sync and no audio control buttons on the right-hand side of the steering wheel. Since then, I have retrofitted in the stock navigation / audio system, added the Sync module, and installed a new steering wheel which came with the proper audio / sync controls on the right-hand side.
After installing the steering wheel, all of the buttons on both the left and right sides light up properly at night, and the controls on the left side for cruise and the message center still work fine. I had the dealer reprogram the SCCM to the VIN of a 2011 Lariat truck which had nav. However, they told me they could not get the wheel controls to work and ended up reprogramming the SCCM back to my VIN.
I would really like to get this to work. In consulting with the company that set me up with the navi and Sync, they said there may be some module which acts as a gateway between the SCCM and the audio system, but not really sure which module that is. Could be the BCM or the instrument cluster.
View 9 Replies