I own a 2012 Camry and i just upgraded from the 17 inch to the 18 inch sport wheels. Do the tmps sensors have to be recalibrated because i get no readings. I thought the car should pick up on its own and show me tire pressure. The wheels came from a 2013 Camry.
View 6 RepliesDo the 18 inch sport wheels only come with the V6 or also with the 4 cylinder SE model.
View 4 RepliesI just purchased a 2014.5 Camry and winter is around the corner. I was going to buy a set of oem 17in SE rims and put snow tires on with out the tpms sensors. The question I have to ask is once the light comes on can you disable the traction control. Reason I ask is because on my 2011 accord it forces the traction control on and is sucks. Snow tires without the sensors.
View 5 RepliesWhat is the tire pressure that will trigger the TPMS to activate the warning light on the dash? I had 31psi in my left front and got no warning?
View 4 RepliesThis will be my first winter using a dedicated set of winter tires and wheels on my 09 Camry. The set doesn't have TPMS sensors. Will the TPMS light constantly flash or just stay lit when the system doesn't detect the sensors? I could live with the light always lit but if it flashes it will be annoying.
View 14 RepliesI just purchased a 2012 Camry, unfortunately the radio is the stock display audio unit, without navigation, satellite radio capability or Entune. Is it possible to upgrade these components and have them installed or would I need to replace the entire unit?
View 1 RepliesAm I getting this MRL when first cranking because the odometer is at 4500 and it is telling me my tire rotation is due soon?
2014 Camry LE
Set up the free oil change for next week (10,600 on the odometer) and was wondering if this is an automatic light just based on mileage. Prior owner got a free 5,000 mile oil change and selling dealer changed the oil at 5,800 when we bought it.
But I guess if there's a reset somewhere that neither prior dealer took the time to do the car thinks it's time for it's first change. This is a 2014.5 SE Sport put in service July of 2014.
Maintenance Required Light just started blinking at start up... Blinks 8 times then stops. Looked up in manual. Will start blinking at start up at 4500 miles and then stay on after 5000 miles. Guess it's time to schedule the 1st trip to the service department.
Not much on the 5K check
- Fluid Levels
- check brakes
- Rotate tires
- etc
The maintenance required light just started flashing on our Camry last night.
It just went to the dealer at 4,200 mi for an "early" oil change (I had wanted an early oil change done, and the the dealer said it wasn't required til 10,000 miles). So no new oil.
It's about 7 months old, and mostly driven on short trips - our other car is used for the long trips. Tires were rotated @ last service.
Does it actually want an oil change? I'd take it to the dealer, but their next appointment is 2 weeks out.
I have a problem with my TPMS ,light is always on ,a technician has told me that i have a camry 2012 TPMS on my tiers which doesn't work on camry 2009. Is that right?
View 4 RepliesSo does the 2014 have the option on the radio to check the tire pressure my grandparents 2012 does but mine does not?
View 13 RepliesI would like to know where's the tpms control module located ... I got a camry se v6 ...
View 2 RepliesI've always wondered why the transmission automatically shirts to 4th gear when I switch to sport mode! Is this normal??? It's an i4
View 14 RepliesCar is year old, 20k. Replacing tires because of bubbles. I expect to run new tires for about 3-4 years. Do I need to replace the TPMS sensors?
View 2 RepliesGot my OZ wheels on, with a new set of TPMS sensors. The old sensors stayed with the OEM wheels for winter tires. How do I reset the system to recognize the new sensors? I have a VAG-COM kit, is this required or is there a method to do this through the MFD?
View 2 RepliesI purchased a set of Scion FRS wheels. I assume these have TPMS sensors installed. I found the reset button under the dash and followed the directions in the manual. The light still hasn't gone off.
Is there a different method to get the TPMS sensors to relearn? Or did I make the wrong assumption that stock FRS wheels have sensors.
I have a 2014 Camry LE with 16 inch steelies, and have found a set of 2013 Avalon 17 inch wheels/tires on CL. Have a few questions :
1) Will the Avalon 17 inch wheels fit my camry?
2) Can the current lug nuts be reused, or do I need to get new lugs?
3) Can the current TPMS sensors be transferred to the Avalon set
noticed at 8k miles i started getting a vibration from the front wheels on my new camry [2014]. feels like typical warped rotor. i could understand if the car were being driven hard but its not. now at 8.5k the vibration is getting worse. Who manufactures a good quality drilled and slotted rotor ? also the dipstick tube at the block [4cyl] is leaking oil. has been repaired by toyota twice already and leaking again.
View 10 RepliesThe dealer tells me my batteries in my low tire sensors are bad. The low tire light on the dash won't go out. So I need to replace the TPMS sensors in my '06 type 5 Prius. I know I can pick them online much cheaper than at the dealer. My question is, is there some reprogramming that will need to be done. I'm assuming it will be some convoluted sequence with buttons on the dash similar to turning off the backup alarm, etc.
View 3 RepliesMy 2007 ES350 had a problem with the TPMS where it would flash for the first minute and then stay solid. After checking all 5 tire pressures and resetting the system by using the button under the drivers side dash, I determined that it was probably a bad sensor. Seeing as how they are 7 years old, this seemed reasonable. (I also checked to make sure the passenger side button for the second set of tires was not pushed).
I just had new tires installed at Costco, and brought 5 new sensors for them to install. They supposedly did whatever sensor registration magic is required, but I am still having the same issue. The light blinks for the first minute then goes solid.
What is interesting is that when I try to reset using the button, the light flashes slower (about 1 per second) 3 times, then goes faster (about every half second or so) for the rest of the minute. Is this some code that the system is trying to display?
Also, is there any trick to getting this system re-initialized that I can pass on to the Costco techs when I take it back up there?