Camry 2012+ :: SE V6 - Front Bumper Cover Loose
Jul 9, 2012
I have a 2012 SE v6 with 1600 miles on it. About a week ago, I noticed my bumper cover pulled away from the corner of the headlight and there was a noticeable gap. I pushed on it, and heard a click. The bumper stayed in place. After a couple days driving, it came loose again. I didnt touch it so the Service Writer would see it first hand. Of course, his first instinct was to puch on it, but I got loud quickly, so he kept his hands to himself, and heard me out. I knew if he clicked it back into place I would be SOL. He admitted something needed to be done, not just click it back.
When I picked it up, he said it was a known issue, and there is a TSB on it. He claimed they replaced a bracket. The invoice reads, "ADDED FELT TO TIGHTEN FIT". Yeah, Im sure that will hold just long enough for them to wash their hands of it.
View 14 Replies
So I recently bought an '09 Elantra for 52K miles. Car's a beauty except the front bumper cover is loose under the headlight on the driver side(got it that way). The first two pics are from the driver side whereas the third shows it in comparison to the passenger (which is totally fine). The gap seems to be getting bigger ever so slightly. What would be the cheapest and easiest fix?
View 1 Replies
I have a 2012 Camry and was wondering how to remove the rear bumper cover? Someone backed into me so I have a shallow dent I want to pop out of the plastic.
View 6 Replies
2013 Prius IV.... I just noticed that my right side rear bumper cover has a 1/4 inch gap between the bumper and the quarter panel. I think it's from me sitting on the bumper while tying up my shoes or something. When I apply downward pressure on the rear bumper, the gap widens. The left side is tighter, but does gap out when downward pressure is applied. In any case, the gap is annoying.
View 19 Replies
I took apart my front bumper for my 2012 Camry SE a while back and swapped it when I hit a cone on the freeway.
I accidentally lost one of those metal nuts that goes underneath the bumper - its like a hexagon if I remember correctly. - I had to use a torque wrench to open them and there was like 8 or 10 total.
View 3 Replies
How to remove the chrome trim around the fog lights and the chrome bars beside them I have a 2014 SE
View 2 Replies
I have a rental 2012 Avalon for two weeks. Yesterday I noticed extensive scratches at the front/right corner of the front bumper. The scratches could be covered with two hands. Some scratches are as deep as the primer, but not on the plastic.
I am pretty sure that they are not there until last one or two days ( it has been raining, they would not be very visible when wet). The scratches looks kind of old, could it be that they were fixed in a substandard way so that they are washed off in the rain and became visible?
View 3 Replies
Having front speaker cover rattle in new Camry? I have a 2012 SE 4 Cylinder. The rattle was driving me nuts for a while and I've located it in a loose left front speaker cover.
Not sure if I want to take it to the dealer or fix it myself. Thinking of maybe just jamming something that's small in there to tighten it or taking it off and having a look...
View 14 Replies
I have a 2013 Accent GLS and I have to replace the rear bumper cover. Any detailed instructions on how to do this?
View 2 Replies
Have an '04 Prius and banged up the front bumper cover. Wanted to know if a Toyota Matrix front bumper cover from the same year would fit on it (without extensive mods, I know anything could fit, but would it bolt right up?).
View 4 Replies
I need to remove the front bumper cover of my Mk6 GTI. I think I know how to do it.
View 1 Replies
How do you take off a front bumper cover on a b5.5 wagon? cant find anything on the internet, I am trying to replace headlight lamps. pictures would be great too.
View 5 Replies
how to remove it.My wife backed into my truck and put a dent in the corner of it so I am hoping i can pop it out.
View 4 Replies
Replacing bumper cover, is there anything I would need to replace underneath it or is it just a simple swap out?
View 4 Replies
Replace the front bumber cover on gx? Mine has a crack and I can get another one but wasn't sure how difficult it would be to swap it out, I guess the toughest part would seem to be the fog lights.
View 6 Replies
Looking for the dome light lens cover for the front passenger side. the one you push in...
Mine has some extremely sticky substance on it and i tried goof off soap and wirebrush but it won't go away.
View 1 Replies
The front bumper on my L is a bit loose. It looks like there's suppose to be a clip there that may have broke off. What this part is? I'm assuming I have to take the entire bumper off to fix it?
View 7 Replies
Just got the 2010 and put 100 miles on it and found the front bumper loose on the passenger side. Difficult to see but it looked loose right by the headlight housing, a little pull and it popped up. Looked like the fastener was never there.
View 14 Replies
How to remove and possibly replace the rear bumper cover on a 2003 camry?
View 4 Replies
I was driving and heard a noise. I immediately parked to the side and looked under and I noticed the thing was loose. My friend said the screws are missing.
Do I need to replace the whole thing? How much would it cost? Can I get the screws at a mechanic place?
Btw, I don't really wanna remove the whole thing. 99 Passat
View 7 Replies
I currently own a 2007 Camry LE 4cycl, and so far its been running great with about 115000kms. First off, I was rotating my tires and notices that the outer cover on the shocks (all 4) is loose...is this normal or is it a sign that they need changing (I have never changed anything related to suspension, so i wouldn't know)?
This is what I am referring to: [URL] .....
The second issue is more difficult to pinpoint. When i am stopped at a stop sign or light, and i accelerate I hear kind of a pinging noise, if i rev the engine in neutral i don't hear the noise. I had the dealer check it and they said it could be the flex pipe, which i had changed but the noise is still there. What it could be? The pinging noise is like a metallic noise, i.e., like pins inside a metal container.
View 4 Replies