Camry 2012+ :: SE - Installing Door Step Laser Projector?
Jun 17, 2013
I want to install it in my 2013 camry se. [URL].....
View 14 Replies
Jun 17, 2013
Advertisement
Camry 2012+ :: Installing DRLs In Different Position?
I don't like how they aren't in the middle of the slots of the front bumper. Where the chrome strips are. I wish they were in the middle of that, instead of towards the outside.
In this video the technician shows that there are holes that you need to drill. This allows you to fasten the DRLs to the bumper.. can I drill the holes in the middle? Would it look stupid up close?
[URL] .....
Camry 2012+ :: Installing Plastidipped Rims
Installing plastidipped their 17" stock rims? Looking for pics and just brief info about it? Like how many cans? I have a CGM Camry SE and just wanted to change my rims up a bit.
View 1 RepliesCamry 2012+ :: Still Smell After Installing New Cabin Air Filter
I have a 2013 Camry XLE V6, and it now has almost 17,400 miles on it. About a month ago, I replaced the Cabin Air Filter (was definitely dirty) and the Engine Air Filter (was somewhat dirty). I made triply sure that I installed the Cabin Air Filter the correct way (the Air Filter is easier, as there is only one way to put it on).
In any event, after the car sits a while, and I start it up, whether I let air circulate from the outside or not, when I press the fan button for the A/C, initially a "musky" smell is present, but it does go away fairly quickly. (I have not tried this in "heat" (non A/C) mode yet). Why this happens? Seems somewhat strange (by the way, I used the correct STP filters that I previously purchased at AutoZone).
Camry 2012+ :: Squeak In Front After Installing Lowering Springs?
I put HR lowering springs and I'm getting a bad squeak when the car goes over a speed bump . It's coming from the rubber on the end of the front springs ? Do they make a poly urethane upper mount?
View 4 RepliesCamry 2012+ :: Toyota SE Tire Pressure Monitoring / Installing New Rims
I just got a new set of rims and it seems the rims don't have the tire monitoring gauges on them, is there a way I can install these new rims without messing up the tire monitoring system or I cant install them at all. Also will this void any of the factory warranties on the car.
View 7 RepliesPrius (Gen 3) :: Replacing Sks Fob Without A Laser Cut Key?
I lost one of my sks FOBs. I'm considering replacing it without a laser cut key. I'll use the other FOB primarily. Any downside to this thought? The charge for the laser cut key is very high compared to the cost of a battery that I could replace every 2 or 3 years just in case. Checked 5 dealers and prices are all over the place but the lowest is the equivalent of about 20 batteries.
View 7 RepliesPassat (B7) :: 2012 TDI SEL - AC Cuts Out When Step On Brakes
Love my 2012 TDI SEL. Lately I have noticed that it seems that the AC cuts out when I step on the brakes. I typically notice when I get off the freeway and come to a stop at the end of the off-ramp. The air coming out of the vents will be warm for some 5 - 10 seconds then get cold again.
I have also noticed this symptom from time to time when cruising along on the freeway. I know that some cars will disengage the AC if you really step hard on the gas, but that's not what's going on here it seems..... I have never had that happen in any other car. Is this normal for the 2012 Passat?
Camry 2012+ :: Rear Door Scratched - Fix?
I was so mad when I saw this scratch. I did not expect any damage to be done on the rear car door. My car was parked on the street so I assume somebody opened their door and hit mine.
Also, how can I fix this? I'm buying the paint from the dealership.
[URL]
Camry 2012+ :: Unused Door Plugs / Wires?
While I was installing my side mirror turn signals I noticed there were two plugs tucked away in plastic not connected to anything. One is towards the outside of the door. As if it was to be connected to the door handle sensor that comes with the push button start package. The other one was towards the inside of the door, as if it is used with the lane assist or even side mirror turn signals. I never really messed with them as I was following the DYI. I should've checked to see if they were wired to the turn signals so I wouldn't have had to run the wires all the way to the fuse block. Below are the pictures of what I'm talking about.
Front/Inside of door
Rear/Outside of door
Camry 2012+ :: Unlock SE V6 By Just Touching Door Handle
I have a quick question regarding the ability to unlock my SE V6 by just touching the door handle... Might be a dumb one so brace yourselves... If one were to go and say have the passenger of the vehicle tap the passenger side front door handle will that unlock the car in the same regards as touching the drivers door handle? For example if I were putting something in the trunk and had the FOB in my pocket and the passenger wanted to get in but I still had the FOB could they unlock the car the same way I would with the driver's door? My car does not allow the passenger to unlock the doors. Can it be programmed to have this work? Furthermore, is there a way to program the drivers door handle to unlock all the doors instead of just the drivers side door?
View 11 RepliesCamry 2012+ :: 2014 XLE Has Driver Side Door Rattle
My 2014 Camry XLE has the drivers side door rattle. What is it inside the door that rattles?
In comparison, my 2012 Corolla LE was built in Japan and was just as quiet as a mouse inside.
This is the only rattle. So small and so persistent. It comes and goes, sometimes lasting an hour, but when it is gone it is definitely gone.
I can tap on the panels, open and shut the door, run the window up and down and yet it continues to rattle. Then, all on its own, it disappears. Sometimes for days without making a peep or a squeak.
It is not the Seat belt, nor is it anything attached to the seat belt. (If anything should be rattling it should be at the seat belt pillar adjustment).
Camry 2012+ :: Lights Won't Come On When Open The Door Until Engine Cranked
Been having issues lately. Like I open the door and lights inside won't come on until the engine is cranked. Clock on dash resets. Then just yesterday I go to start it and get nothing. Checked battery connection and they are tight. What it could be. It's at the dealer being checked out. Probably will get the dreaded couldn't reproduce the problem.
View 1 RepliesCamry 2012+ :: XSE 2015 - Center Door Ajar Screen
i have a camry xse 2015. In the center screen, where the car displays animations for door ajar and trunk open, I am wondering, is it supposed to display anything for hood open, when i pull the hood latch or open the hood. my car is not showing any thing on dash or center screen when i open the hood.
View 12 RepliesCamry 2012+ :: 2015 LE Driver Door Popping When Opening
I just bought a used 2015 Camry LE 3 days ago. I just went to open the driver's door & heard popping as it opened. It's coming from the hinge area. I see posts about older Sienna vans having problems with broken welds causing the sound. Is it possible that a 2015 Camry could have the same problem? It's still under warranty. Are there any TSB's about it? Anything official from Toyota that I can take back to the dealer so they don't try to lube it instead of repair it & try to wait out my warranty?
View 1 RepliesCamry 2012+ :: 2014 - Map Lights Don't Turn On When Door Is Opened
I am having this strange problem with my 2014 Camry: When the door is opened, the dome light turns on but the map lights do not, unless I physically press the light cover to turn them on - and they stay on indefinitely even when the door is closed. Is this worth taking to the dealership or is there a quick fix? Strange I never experienced something like this before.
View 3 RepliesCamry 2012+ :: Buzzing / Static On Driver Side Front Door
I am a new Camry owner. I am very pleased with the vehicle so far, but I've noticed a strange buzzing/static sound coming from my driver's side front door.
I checked to see if anything was in the storage compartment on the doors (all of them in fact) but I saw nothing in there. I turned off the stereo system and I double checked that all the windows were closed, yet the sound persisted for about 5 minutes. This has happened intermittently for several days now, and seems to happen whenever I go over some rough surfaces.
Camry 2012+ :: Paint Scrapping Off On Passenger Side Where Door Opens Up
On the passenger side where the door opens up the paint seems to be scraping off... It's pretty noticeable on my black car. It's only this one side.. The door doesn't touch that piece so I'm not sure what caused it.
View 8 RepliesCamry 2012+ :: 2013 SE - Open Door Chime / Buzzer With No Key In Ignition
Over the weekend I installed a LOC and amplifier w/sub to OEM stereo in 2013 Camry SE. System has touchscreen and navigation. Prior to installing I disconnected the battery so I wouldn't have any surprises. Well, I got one anyway. After everything was reassembled, the car now chimes when the driver side door is opened (haven't checked passenger door) even when the key is out of the ignition. This happens even after remotely unlocking the doors. It looks like there is an option to remove door chime when opening the door. I know this doesn't apply to when leaving keys in car.
View 1 RepliesCamry 2012+ :: Unlock All Doors When Touch Driver Door Handle
How to set the car so that when you touch the door handle it unlocks all the doors and not just the drivers door. I have a SE with Nav.
View 9 RepliesCamry 2012+ :: Multiple Power Door Lock Actuator Failures
I have a 2014 Camry SE with 35k miles. About six weeks ago the drivers side front power door lock actuator failed and was replaced by the dealer under warranty. Last week the front passenger side actuator failed and was replaced. Today, both rear door lock actuators stopped working.
I searched the forums and didn't find anything like this happening to other owners. It sounds like I have something burning up the actuators. I am very concerned because the new car warranty is up in less than 1000 miles and I could have an electrical problem on my hands. The actuators that have been replaced seem to be working fine. How I can handle this?