Camry 2012+ :: Multi Informational Display Screen Blank
Jan 8, 2016
Recently brought a 2015 camry SE and wouldn't you know it, someone pulls out in front of me on the highway within a week of buying it. After getting the car back from the auto body shop, I've noticed that my multi information display has a blank screen. Didn't notice that before the accident. The first 3 screens I can set up as I want, the 4th screen is tire pressure and the 5th screen is blank. I've tried to find out what the 5th screen should be but I haven't been able to find an answer.
View 2 Replies
Advertisement
When I have my daytime running lights on, all is fine. When I switch to anything else on the stalk, including my night time head lights, it goes off, along with some temperature control background illumination. Only the shift icon stays on the MID. When I switch back to daytime running lights, everything goes back on.
View 6 Replies
My wife on her way home from work called me to say that the MID screen was blank - not working. I asked if she could drive the car, she could, but the energy monitor screen that she has on usually was not coming on. Her concern while driving was that she could not tell how fast she was going.
Fortunately, just a week ago I had installed Scangauge II in her car and had her convert one of existing gauge to MPH. This is a new 2012 Prius IV that is about 2 months old. I'm pretty sure that MID can't be turned off.
View 19 Replies
I have very recently purchased a 2011 GX. Everything seems to be in working order, aside from the "multi-information display" in the gauge cluster. While the electronics options screen functions as described in the manual, pressing the menu button results in a blank screen instead of switching to the customization and/or driver information screens.
View 3 Replies
Recently, i just bought an multi-information display panel (with touch screen support) to integrate into my RX330 which is a non touch screen NAV display panel.
The 2nd hand multi-information display panel is from a 2004 RX330 and what are the socket behind the display panel meant for.
what is the 4 socket connectors as indicated in the red circle in the image should be connected to?
View 1 Replies
I had the basic Entune radio but recently upgraded to the Entune Audio Plus with navigation after talking with a tech at the dealership. I unfortunately don't have the audio tab at all, how to add it to my display. No one at the dealership knows how and they referred me to Toyota Corporate about my situation. Any button sequence that can add or delete tabs on the display?
View 9 Replies
what does that icon or symbol on the left side the temperature on the the multi information display? I only noticed it yesterday when the temperature was around 2'C.I'm not sure if it is a malfunction since I can not see it on the manual.
View 4 Replies
Went to a meeting one evening last week with my 2010 Prius, everything working well. After the meeting we drove away and noticed that most of the dash display was "dark". Driving home and feeling a little gloom as I wondered what it might cost to fix the display problem.
I noticed the poster announcing the meeting we attended was laying on the dash and was pushed up to the display screen. I pulled the poster back an inch and the display came back on !! Pushed it forward and when it got within 1/2 inch of the display, it would blank out ??
It appears the dash display is some sort of bottom projection system to the display screen. Pushing anything up to the display screen blocks that bottom projection and blanks the screen.
View 3 Replies
RNS810 ... My display went blank even though all the touch screen features are available (but hidden from view). Phoned VW who say there is a software update to address the blank screen issue - will try and get it done tomorrow.
View 1 Replies
I got in my 2010 Highlander and started it and the small display screen that shows gas milage, air temps, time, temperature. etc. just went white. It appears to have light behind it but will not display anything.
View 3 Replies
I came across a post where someone said it was possible to add a gauge/setting to the blank "gauge display" screen. I've searched and searched but can't find the post. Ho to add to the gauge display blank screen.
View 14 Replies
I was in my friends' new Corolla and Tacoma (both with the Entune Plus) and noticed right away that their backup camera image was much clearer than my 2014.5 SE with the base Entune Audio.
So I went to the Toyota Camry site and look at the current specs,
LE,SE standard
(6.1-in. touch-screen display)
XSE,XLE standard
(7-in. high resolution touch-screen display)
So I am wondering, has the XLE always had the high resolution display since 2012?
I am guessing the only cheap upgrade option is buying used display units to swap out. Does the rear camera need upgrading also?
View 2 Replies
Every day I stop at my mailbox to get the mail. I get out of the car with the FOB in my pocket and leave the car running. When I close the door the car beeps three times to let me know it's still on. This is exactly how my 2010 Prius operated. However, when I get back in the car the multi-information display always changes from the hybrid system indicator screen to the energy monitor screen. I always have the HSI on as default. This isn't a huge deal but it's kind of annoying. Is there a setting somewhere that I can change that I've missed?
View 6 Replies
I just traded in my 2012 Camry SE for a 2015 Camry SE and heving trouble getting the text messages to be displayed through the car's audio system screen?
View 3 Replies
The wife was driving the 07 XLE 4 cylinder the other morning. Temperature was around 2 F. She started the car. It started right up. Drove for around 5 minutes and shut the car off and went in to a store for 5 minutes. When she came back out and restarted the car an "E" appeared in the XLE's multifunction display and the low tire pressure light was also on. The car would not shift out of Park. The wife called me. I told her to shut it off and try restarting it. Same thing.
I then told her to shut it off and take the key out of the ignition and then try reinserting it and restarting it. That worked; it eliminated both codes and the car was able to be shifted normally out of Park. Since I still have about 10 months coverage left on my Platinum Extended Warranty the wife and I took the car over to the dealer. When I had my wife explain what happened to the dealer's service writer he just said I have never even heard of the "E" symbol. The tech said he never heard of it either. They did check out the car's shift/interlock system including the brake light switch, but could find nothing wrong.
View 6 Replies
The navigation screen on my recently went blank, while I was driving to my little brother's graduation. I can still see a faint outline of the screen, but other than that, it is hard to see. Have this problem with their navigation screen? I've tried look in the manual for a solution, but it doesn't have anything useful in it. I've googled for the solution as well, but most people said that if I were to bring it into the dealership, they would just replace my whole unit and that would cost $2000 or more, which is a no-go. I've tried to see if it was a fuse, but I got no idea what I'm looking at when I looked at the fuse box. I'm thinking it is maybe the backlight and that it maybe just died. By the way, the screen still works, I can still press on it and select my preset radio stations, but just can't see.
View 3 Replies
I have a 2007 Camry XLE with a four cylinder engine. Noticed radio and clock quit working. The radio screen is blank. None of the buttons work. Popped hood open to check fuses and noticed corrosion on positive battery terminal. Cleaned battery terminals up and still nothing on radio and clock. Everything else seems to be working correctly. Checked smaller fuses for radio1 and radio 2. Checked all other small fuses in engine compartment and under dash. Still not working. I also pulled battery out and had Oreillys check it. It was good. Not sure what it could be.
View 9 Replies
Not the usual. I stopped on my way home to get gas tonight when the gauge was showing one pip. Naturally it wasn't low, but I'm used to that.
The odd thing is that after I got in the car and turned it back on the gauge stayed at one pip and the fuel display on the multi-function display didn't reset.
View 2 Replies
Today morning, when I started the car and backed out of the garage, the rear view camera display was not lit-up. Normally as I get out of the garage, it senses the change in outside lighting & changes the brightness of the display automatically.
After backing up, I put the car on Drive and then on Park, but the display was totally blank. No audio nor response by touching any buttons. Then I turned off the car & restarted it.
Then the display came up, but with this weird looking screen, which I have never seen before in the 5 months that I have owned this car..
It lasted for about 30-40 secs, with the progress bar moving all the way across. Then everything was back to normal!.
View 1 Replies
Occasionally, right after I start the car, the HDD display screen will be dark for a minute or two, and then display the map. I can go to the other screens, like Audio or the setup screens, but the map and the backup camera screens are dark. The still-functional buttons are responsive as usual (no delays/hangs). When the map finally "wakes up", it behaves normally. I don't have to do anything other than wait for it to wake up. It does this about 10% of the time. I have tried to correlate this to something, but it seems totally random.
View 4 Replies
It distracts me too much and I can't seem to get better than 45 mpg no matter how I drive (regular mode mostly highway). Any way to turn it off permanently?
View 11 Replies
