Camry 2012+ :: Front Map Light Assembly Removal
Aug 3, 2014
How to remove the front map light assembly. I was trying to replace my map light with LED and one of the holder came off from the assembly. Is there anyway to secure it without removing assemble?
View 1 Replies
Advertisement
I have a 2016 Camry SE.
How do I pull out the map light assembly? The whole thing not just the bulb covers.
I tried pulling from the rear but it won't budge and created a crease in my headliner.
Is there a certain way to pull it down? I don't want to damage the headliner anymore since it's not even a week old yet.
View 2 Replies
On my 2012 Camry XLE with 22,500 miles, just had the drivers side drive shaft assembly replaced, under warranty. Was getting a clicking sound when turning. Not too happy, car comes off warranty in September. They also updated computer on a recall for the torque shutter.
Then he tells me I need an oil change (was just done, oil shiny clean). He said oil looked dirty. Also said I needed a fuel injection cleaning (at 22.5k?), and new tires. OEM tires are garbage. Wheres the Toyota quality and integrity?
View 1 Replies
How to remove the chrome trim around the fog lights and the chrome bars beside them I have a 2014 SE
View 2 Replies
How to remove the fog light assembly on a 2013 Sonata.
View 5 Replies
Installing some fog light HID's and was wondering how to remove the front bumper.
View 7 Replies
Looking for a DIY for removing the side mirror assembly? I have to replace the whole thing.
View 12 Replies
I've removed 3 bolts ( Headlight assembly removal)and loosened the number cover to be gridlocked by something I cannot see or just a bit more friction than the amount of force I'm willing to give for fear of breaking something.
View 9 Replies
How to remove the center (upper, right above the radio) dash vent assembly on an '04 Passat (I assume many other years would be similar). I have a rattle/squeek in there that I'd like to address. Sliding a credit card in between the vent/dash provides some improvement, so I'm thinking if I could get the assembly out and shim and/or lube it I might be able to resolve the problem.
View 2 Replies
Is it hard to remove the headlamp assembly. I am only asking because i am considering purchasing smoked/blackened headlamps and tailights on ebay.
View 14 Replies
I just bought a '12 Camry SE. However, the belt line molding (shiny trim piece below window) is dented in. How can I safely remove the piece without damaging anything? I may be able to knock the dent back out of this piece after removing it. Any specific tools required for removal? If I purchase the new molding from the dealer it will cost about $100, which I would like to avoid.
View 7 Replies
My 2015 camry front dome light switch is broken. This is the push type light. I am not sure how but today i was trying to turn the light on and noticed it wasn't turning on. When i opened the lens cover to switch the bulb i noticed the button was missing and the other side has a button. I don't understand why the light will not turn on when i open the door either. I tried sticking some thing small in to the broken part where the button used to be and it turns on if i do that, but i would have to hold it in place which is pretty inconvenient. What can i do to fix this? it seems like i have to replace the whole overhead assembly. Is there a cheap fix? i would be happy if the light comes on when i at least open the door.
View 9 Replies
I'm attempting to replace a front wheel bearing and hub assembly on a 2004 Chrysler Sebring. I've removed all the hub bolts and all other more external components. I've tried hammering the assembly, reinserting the bolts partially and hammering those, a slide hammer, liquid wrench...
View 9 Replies
I have a camry se and I am currently adding accent lighting to my car. I am trying to take the area around the shifter and the cupholders out so I can hide some wires and mount the led lights controller. How to get this out?
View 4 Replies
Looking for the dome light lens cover for the front passenger side. the one you push in...
Mine has some extremely sticky substance on it and i tried goof off soap and wirebrush but it won't go away.
View 1 Replies
I am trying to replace the ball joint on my 2008 f-250. Does the hub assembly come off of the knuckle or do you remove the whole knuckle and hub assembly together? If you have to remove the hub assembly what is the best way?
View 14 Replies
I have a 2008 Camry SE with JBL. I was wondering how do you remove the front upper speakers that are in the dash. I looked around but everyone show the front door removal not the upper speakers.
View 4 Replies
So looking to replace the passenger side front LED fog light assembly as the one that's currently on the car has a bad seal or something and lets water in. I have a new LED assembly but I'm lost with how exactly I'm to get the new part in. I've searched for diagrams regarding the replacement of the part and found one diagram that said the front bumper had to be completely removed from the car but I find that a bit hard to believe... (Then again its euro so maybe it's not hard to believe). Can the lower intake grill on the passenger side not just be pulled out or something? 2012 Golf R MK6....
View 2 Replies
I need to replace the front passenger side wheel hub unit on my 2012 F250 4x4 120,000 mile reg cab truck. Its been a while but I did one on my 2000 F250 without any problems. There should be a few clips inside the hub that hold the looking hub and shaft together, right? Do I need any special tools for this job? What do the bolts need to be torqued to?
View 2 Replies
I want to not only upgrade to LED lighting, but I want to add to the single bulb fixture found in the center dome light (between the front and rear seats).
I can get the cover off OK, but I'm having trouble figuring out how to remove the fixture itself. There are what appears to be press fit style plugs (similar to what you would expect in a door panel) but there is also half-slots making it look like one side pops out and the other side slides off the mounting plug.
How to remove it without breaking it?
View 12 Replies
We have a '12 Camry LE. I'd like to know if it is possible (and what would need to be replaced) to get the front map lights to light up when you open the door, similar to a Camry with a sunroof.I have a 07 TSX and like that feature. It is a little dark enter the vehicle without them.
View 8 Replies