Camry 2012+ :: 2016 LE - Transmission Clunking Noise When Shift Into Reverse With Foot On Brake
Nov 6, 2015
I bought a brand new 2016 Camry LE. Sometimes when car sits for a while, and I shift from P to R, there is a clunking noise with foot on the brake. I tried with the parking break engage and it still does it.
View 4 Replies
Advertisement
I've noticed something weird with my 14.5. Over the last two days it's making a clunking noise and the car shudders going from neutral to reverse. I never noticed it before on this car and certainly not on my 2012. I'm not on a hill, revving it, or anything, foot is firmly on the brake. I first noticed it going from drive to park, felt it, and was able to repeat it sitting there by going from neutral to reverse.
The other oddity I noticed is the car sometimes rocks forward once I put it in park and took my foot off the brake, even with the parking brake on, but it doesn't do that all the time either, grade doesn't matter. The parking brake works fine, it holds the car in place in neutral on a slight incline, and I felt it when I backed the car up with the brake on a month ago.
Didn't think to mention this at my appointment the other day but now that it's acting odd going from N to R I'm wondering if I should have. This transmission seems to shift better though overall then my last one (little smoother, quicker) so I'm hesitant to have them start messing with fluid levels or anything.
View 5 Replies
Over the past month or two, I've noticed a clunking sound coming from the front brakes when you apply the brakes. It seems to only happen when you're backing up and after the car has sat a while.
View 3 Replies
I am planning to buy this 2012 Camry LE (38k), automatic, I am on the test run and realized that the car's shifting from park to reverse is harder than shifting from reverse to drive. What I mean is, it is really hard to move the selector from Park to Reverse.
View 6 Replies
My 2012 Toyota Camry SE V6. 37,500 miles. Occasionally when I'm parked shifting down to reverse it's so tight/put effort to shift & it literally thumps the entire car.. I heard to put the E-BRAKE/PARKING BRAKE down BEFORE shifting it to park & it worked but occasionally even with the E-BRAKE/PARKING BRAKE it still jerks the entire car going from PARK to REVERSE.
Also going from REVERSE to NEUTRAL it gives off a little vibration underneath me ALL THE TIME going from REVERSE to NEUTRAL.. I know these are so many questions that are probably a no-brainer answer but I'm looking to see if any one here had/has or heard of a similar or exact problem. Is the trans fluid low or dirty? I saw the CARFAX I didn't see the services he's done it's only been 1 owner on this car I'm the second. Previous owner leased it brand new.
View 7 Replies
I have a 2014 Camry LE with 21,000 miles. I am hearing a clicking sound when I brake while in reverse. What this sound might be? I tried to replicate the sound at the dealer but I couldn't. Now it just started again today.
View 5 Replies
So I was driving home from work today and picked my daughter up from the sitters. When I got back in the car I noticed a "clunking" noise when I would hit small bumps. Trying to figure it out, I also noticed this occur when driving straight and moving the steering wheel back and forth.
The car is a 2012 SE v6 with about 26k on it.
I did install eibach springs about a month ago, but have not had any issues until now. I took both front wheels off and checked anything I would have changed when installing the slings and everything seems okay.
View 5 Replies
Drove a new 1.8T VW Passat last night. 170hp/184ftpd torque. Huge difference! My Camry feels totally underpowered now. Also the transmission seems to shift into high gears way too early. Had reprogram recall done and shifting was better for a little while but now is back to being the same as before.
View 14 Replies
2013 accent auto My car rolls noticeably after parking unless the ground is completely flat. Parking brakes prevents it from rolling but I don't use parking brakes every time. Another brake problem I have is thump or clunk noise I get whenever I release a brake from stop.
View 12 Replies
I've owned my 14.5 camry se 4 cyl since may and a few weeks into owning it i noticed a pop/clunk coming from the front passenger side while reversing and turning the wheel. So, finally got some free time to take it into the dealer today and dropped it off. Also, when letting off the brakes you can hear like a creaking noise, almost like the brakes are metal to metal but it only happens LETTING OFF the brakes?
My service advisor says supposedly the "creaking" noise when letting off the brakes is normal. I told him i really don't believe that lol and asked to test drive another new camry on the lot which is being arranged for tomorrow. In the meantime he says they're gonna look at it either way.
View 4 Replies
I have a 2007 e-150 ford van with only 38,000 miles on it, with i believe a 4r70w transmission. The problem started yesterday. Going in reverse, it would go, but as soon as you take the foot of the gas, it would stop immediately, plus very difficult until it would start rolling, I think this is called engine breaking. Also, in Park, revving the engine, the trans makes a very strange noise, and wants to creep up (move forward) with more gas you give it. neutral does the same thing. When i drive the van, it seems like it switches gears fine, and does not make any noise, but the OD light does not show when you press the button. I did check the fluid, nice and red/pink color no smell at all. No leaks under the car, and the trans is totally dry all around. I do not show a check engine light on. This morning my friend came over with his scanner and hooked it up to my van's plug. It showed no codes of anything wrong. What might be wrong with the trans? My friend seems to think it might be a solenoid problem, I sort of think it might be a shifting problem, but i am no mechanic.
View 14 Replies
I took my truck in for a clunking noise in the driveline as I come to a stop and sometimes when shift into park. It is now the 7th and I'm told parts have been ordered and the truck will be worked on when parts come in. I asked to speak to general manager and still no call back. I called customer relations and nothing they can do.
Honestly I think the have me on the back burner since I'm warranty work opposed to marked up repairs. Am I being unreasonable on my expectations of repair time? I called around and a ring and pinion job is quoted at 3 days at the most. Other repairs have been approved as well and parts are in for those, but they have not actually repaired them either.
View 14 Replies
For a few months now I have been hearing a tap clunk type noise coming from under the car when I shift the auto trans into drive and reverse. Also sometimes when the car is slowing when driving I hear the tap sound as it shifts into first. I drove in by my local dealer and they listened to it and said Elantra transmissions can get noisy there is nothing wrong. They told me I have plenty of Warranty left so if something happens I will be covered.
View 2 Replies
I have a 2012 Camry LE and notice that when i open the rear driver side door, there is a clunking noise when it opens into one position. I tried greasing the hinge and it didn't make much of a difference.
View 1 Replies
I gotta prob with my 08 camry 83k....I bought it two months ago and def didn't notice this so think its a new prob.. Whenever I take my foot off the gas the car seems like it doesn't shift smoothly... For example if I am going at 2rpms, I will take foot off, and go to 1rpm, and then it will jerk back up to 1.5 rpm..is this normal? The dealership tells me everything is fine and I am not so sure figured to consult with the pro's ...
View 5 Replies
Put foot on brake, selector in P it will start but will not shift.
Put foot on brake, turn key on, put selector in N it will start and shift R or D as normal EXCEPT do not shift to P as it will lock up and you have to start all over again.
Selector is basically aligned on the letters appropriately.
2001 F150 supercrew 5.4
View 14 Replies
2004, 6.0, 96,000. I noticed a occasional clunking under the passenger foot area. The exhaust pipe is loose at the turbo connection on top the engine. It is swinging L & R & hitting the spring hanger & transmission cross member. Is there a rolled pin, dimple or other alignment device at the flange at the turbo???
View 4 Replies
I have a 2003 Ford Focus with the Zetec 2L, 16 valve. When the car is warm and I put it in neutral or park and take my foot off of the brake it will occasionally shut off. Not stall, but shut off - as though I turned the key. This doesn't happen every time; it usually doesn't. I have no other drivability problems and there are no warning lights or engine codes. The ideas I have are:
- Vacuum/ brake booster leak
- MAF problem or dirty throttle body
- Something weird going on with the transmission shift interlock mechanism.
View 2 Replies
I have a 2002 santa fe 2.7. I just had the transmission rebuilt and since then have noticed a clunking sound when I shift into drive or reverse. It seems to be the lower motor mount is making noise from the motor moving the mount. I look at the mount and it appears to look good, but was wondering how I can really tell if a motor mount needs replacing or not.
View 3 Replies
My rear brake makes a whining noise when I go on reverse. I know is brake related because while on reverse, if I barely touch the brake pedal the noise goes away. But without touching the brake pedal whines and sometimes loud and is embarrassing.
View 5 Replies
I think this is dangerous. Several times I've stopped and hit the turn off button and had the car creep forward when I actually didn't shut off the engine. I had taken my old 07 Prius to the dealer to see if they could fix this and they said they couldn't.
View 19 Replies