Camry 2012+ :: 2013 SE - Steering Clunk / Knocking Noise At Slow Speeds
May 4, 2014
I have a '13 SE that I purchased new last year and recently I've noticed a noise in my steering when I am turning the wheel at slow speeds.
It's like a clunking or knocking noise when I turn the wheel either right or left all the way. I'm totally clueless as to what could cause this sort of noises.
View 7 Replies
Advertisement
Every once in a while, while driving my 06 350 SRW at slow speeds, I hear a grinding noise coming from the left side of the truck. It is almost like a winding grinding noise if that makes sense. It will grind slow to a stop, and then I hear a clunk.
This is a very intermittent problem. The tires are completely shot on the truck, and I thought that would be it, but considering it is intermittent and the clunk I hear as I come to a stop I figured it could be it.
View 4 Replies
2007 camry le with 85k miles, there is a bad vibration in the front end, the steering wheel rocks, and when you turn right or left at slow speeds there is one knock, not a clicking, just one knock, also noticed the front driver side wheel has heavy wear on the outside corner of the tire, cv joint, bearings...
View 3 Replies
Just like the tittle says. My 2011 ISF with 56k miles on it is making a Clunking noise when pulling out of a parking spot or just anytime I fully steer to the left side and begin to move. If I try it in reverse it doesn't matter if I turn the steering wheel fully to left or right it makes the same noise as I begin to move at slow speed. It almost feels like something is pushing the front wheels out. During normal driving I don't feel anything at all, just as steady as solid the car can be.
Is there any common issues with ISF with premature wear of ball joints, cv joint, sway bar bushings or hub bearing?
View 7 Replies
My brand new 2015 Santa Fe Sport (limited) is making a "knocking" noise (emanating from the steering wheel / steering column?) when I turn right.
Instead of trying to describe what I'm talking about, I posted a video here: [URL] ....
* See 6s and 18s marks
Fault will go away on some turns but is generally consistent and easily duplicated. Took it to the dealer and they are stumped as well -- follow up appointment next week.
View 26 Replies
My 2007 camry makes a clunk noise when I drive over a pothole on the passanger side of the car at low speeds. The noise comes from the rear passenger wheel area (which I tested with an empty trunk).
I took it to sears and they want to replacing the rear sway bar links and bushings for about $420. It seems like an easy job, so I took the car home and yanked on a bunch of suspension parts. The wheel doesn't have any play, the sway bar end links rotate slightly as you would expect a ball joint to rotate (towards to bumper or towards the hood).
The only play I could find is in sway bar itself, it moves left to right (driver side to passenger side) a little. In the picture below, there is a gap between the silver collar and the bushings. Is it possible that the bushings I have are too thin? Should they be tight against the silver collar to prevent sway bar movement?
View 2 Replies
When I was reversing back and turning the steering wheel. I heard a metal clunk sound and it had happened twice in the past two days. Today happened after I released the parking brake and set it to reverse. What is the problem? Miles on the car is ~30700 miles.
View 2 Replies
2002 Ford Escape XLS 5 Speed, My timing belt was just replaced along with the timing idler pulley, timing belt tensioner, serpentine belt, tensioner and idler pulley, spark plugs, and valve cover gasket. It drove great yesterday but this morning when I was taking my son to school the engine started knocking. It does this idling and at slow speeds. Once driving the noise disappears. What this may be?
View 1 Replies
I have a 2003 Jetta Wagon with 49000 miles on it. I noticed that when turning at slow speeds (like taking turns in a parking lot) I hear a klunk coming from the area of the left front wheel, and I think I feel it through the steering wheel. Yesterday I was going around a hairpin turn at a shopping mall and heard two clunks. Driving straight it doesn't happen.
View 8 Replies
Recently on my gen 6 with about 68k miles I have noticed a very pronounce noise when turning the steering wheel whether the car is stationary or in motion. It makes a loud creaking/popping noise and it cant be heard from outside the car. The noise happens no matter which way I turn the steering wheel. I know Toyota has had problems with their intermediate steering shafts.
View 5 Replies
I have an intermittent "clunk" noise that appears to be coming from up in the rear roof area when I go a gentle bump (like going over uneven pavement pulling into driveway). It's almost as if there is a large ball bearing up there that rolls around and clunks every once in a while. I've tried opening/closing the sun roof and have bounced up and down on the rear of the vehicle to try to replicate... but no luck.. It's almost as if something hits the roof when going over a bump... but there's nothing there that hit the roof...
View 14 Replies
Not a huge deal, but my '06 XLE has a steering shaft clunk, I'm assuming that it's the collapsible shaft making the noise. I notice it, I don't dare mention it to my wife who drives the car. I'm at about 60K and I have read about the problem before, I was just wondering if there was ever a TSB on it.
View 8 Replies
I have a 2011 SF 2.4L FWD GLS with 79k miles. I replaced the OE struts and shocks 3 weeks ago with Monroe OE Spectrum struts and shocks. This improved the ride tremendously especially on the front passenger side where the strut was leaking.
After driving it for 3 weeks I still feel a little rattle or clunk when driving over ruff roads at slow speeds. I did check the ball joint and wheel bearings while I was in there, and I am certain they are not the source of the noise. I also checked the strut mount when I transferred it to the new strut, and while it appeared and felt ok I think it is the most likely cause of the remaining rattle and clunk.
Any aftermarket strut mounts for this particular model year? I have looked at RockAuto and they have a Moog Part # HYSB9816. This part claims it is for the European builds. Is there really a difference for this particular part?
View 4 Replies
Just recently purchased a used Toyota Camry , i love it. So far everything is great about it, only negative part is that i feel when i turn the steering wheel like a knocking sensation and you can also hear it. Its not the normal grinding sound other people are experiencing. It feels like theres something loose in the steering column. Also while I am driving i can hear like a thump on the right front suspension. normally this sound when i am going over bumbs. Is this like the shocks or something?
Just in case i have a 2008 Toyota Camry SE.
View 7 Replies
I get an audible clunk/thud noise when I go over a dip or bump in the road. The sound only comes from the passenger side front wheel and only happens once when the car is cold. It almost sounds like a strut mount or something. I've just been living with it but recently the noise has happened when the car is warmed up. The driver side front does not make this sound. It is not the ABS self check noise that some people hear.
View 10 Replies
So I was searching around online and it seems this thing happens to some ppl after lowering their cars. I'm getting a loud pop/clunk noise from the front left side only. Seems that's the most common place ppl are having this type of issue with. What it could be? My mechanic wont be able to look at it till Friday. So not sure on what to do. The sound only happens when I'm hitting bumps on the road.
View 6 Replies
I drive a 2012 SE V6 with 1600 km in it. Literally brand new car, two days ago I noticed a faint knock when driving normally over medium sized bumps in the road. Sound seems like it is coming from the front drivers side. It's not my first time around the block and wonder if it's suspension related or steering related. It's going to the dealer tomorrow...
View 14 Replies
We have had the 2014 Camry SE for 3 months, 2000 miles, (we also have a 2005 Camry LE) and our first interstate trip is when we noticed it. When we get close to 70 mph and above we hear it. Sounds like some maybe flapping/rubbing? No really metal sounding, maybe plastic? I have checked under the car, do not see anything loose. We first thought it was coming from the storage area in between the seat, but we took everything out and the noise continued. Dead center under the car it sounds like. It does it every time, the same sound.
View 11 Replies
I have a 2003 Toyota Camry. About 10 months ago, when I get a transmission fluid change, the mechanic told me that my power steering fluid is dirty. A few month later, in the cold winter month, my steering wheel make loud screeching noise when the engine is cold only. The mechanic told me that I have a small power steering leak. But since I don't see the power steering fluid level goes down and the mechanic say I don't have to fix it now, I didn't do anything about it.
About a month ago, there is a squeaking noise come from my steering wheel every time I drive very slowly out of (or into) my driveway and turning the wheel. Now I heard the noise when I drive slowly (10 mph) and turning the wheel too. So what is the problem that cause the noise when I turn the wheel at slow speed? I only drive about 5k miles a year. Is it safe if I just continue to ignore the problem?
Also, the color of my current power steering fluid is amber, but a little dark. Which power steering fluid should I buy?
View 6 Replies
So i cave a Clunking noise and feeling coming from the steering column every time i make a slow turn or when i am driving trow ruff roads. I can feel it through the steering wheel.
View 9 Replies
I just bought a 2013 Totyota Camry LE. Everything is great so far besides the bluetooth. I do not have problem connecting but when I connect my phone via bluetooth while streaming radio like pandora or iheartradio or even local files, I cannot skip tracks using the controls on the steering wheel. Also there is no next/previous track button on the touch panel. Am I doing something wrong or was it how this system was designed.
View 1 Replies