Camry :: 2011 SE V6 - Tap / Click Noise If Push On Brakes?
Mar 16, 2015
2011 SE V6 w/25k miles
Lately I've noticed that when I first back my car out of the garage if I push on the brakes it makes a tap/clack noise from the front end. It sounds like it's possibly on the passenger side but it's hard to tell.
It will also make a similar noise if I'm braking relatively hard, just before I come to a stop.
It almost sounds like the pads are moving very freely on the guides and possibly moving or shifting. The brakes work fine and no other noises or issues with the car.
View 2 Replies
Advertisement
Camry 2011 making noise I would say kind of rattle noise. Makes noise mostly in the morning when I push gas and stays there for 7-10 minutes and then goes away. Also in the afternoon when I get out from work and start driving. What makes this noise or where it is coming from.
View 7 Replies
Need to change a starter of an ls460? My car died on me yesterday and i strongly feel its the starter. When i push the start button i get a loud click noise.. after playing with it for 20 min it actually started. Battery is good, no codes..
View 14 Replies
While working on diagnosing my center console issue last night, my engine refused to start & I am completely lost as to what the issue is.
I hear a buzzing sound when I hit the brakes and push the button to start.
But all my headlights lights & interior electronics work fine.
I am so irritated as this happens on the SATURDAY evening and everywhere is closed on Sunday; hence I can't get the car serviced.
This is a brand new car w/ less than 2600 miles on it.
YouTube ....
View 14 Replies
I am guessing my brake pads are going but figured I'd check with the forum first. What does it mean when you press down and about 3/4 of the way you start hearing this grinding noise almost like two pieces of iron are grinding across eachother?
View 19 Replies
I have a 2007 Camry I4 AT. I searched and most mention noise coming from brake, etc. I don't see noise being mentioned when car is parked.
With my Camry in P, if I push the car a little bit, even just getting in or out of the car, I can hear a metal grinding noise coming from the rear of my car. The brakes looks okay. If I engage the foot brake, the noise reduces but does not go away. The noise seems to come from the bottom rear.
View 2 Replies
I have a 2009 Corolla S and the symptoms are as follows:
1. Normal forward driving, brakes work fine (and as expected without sound).
2. In reverse, when I apply the brakes I hear a click (clunk) sound from the front brakes. It only makes the sound when I'm going from moving to stopping (IE: I cant just keep pressing the brake once stopped to generate the noise). But if I let myself continue in reverse and press pedal again, it will make the same sound (very repeatable). I don't need to go forward to replicate the sound, I can just stay in reverse, stop (CLICK), continue in reverse, stop (CLICK), etc.
3. The it's noticable in the pedal. I can feel it on the brake with my foot when the noise happens.
4. It happens when I depress the brake pedal about 1/4 down, a gentle stop. And usually happens every time when I back out of my driveway or parking spot.
5. GF's sister's 2009 corolla CE does NOT make this noise in reverse.
6. 20,000 miles, Orig tires/brakes, didn't happen 4ish months ago.
I plan on putting winter tires on next month. Perhaps I'll take a look at the pads to make sure they aren't moving around, but wouldn't I also hear the noise in forward motion? Or when I switch from forward to reverse?
View 13 Replies
The gas door won't open. I hear clicking when I push the release button but the door won't pop open. I don't even have enough gas to get to the dealer.
View 12 Replies
Just noticed a clicking noise every time I push the clutch pedal down, I had my wife push the pedal while I listened under the hood and no noise it's coming from the clutch assembly under the dash! It's a 2013 only 4000km's on it so it's not like anything should be worn from over use etc. It's when I had the radio off driving I heard it, not super loud but more curiosity if it's normal noise from a clutch assembly.
As well the odd time I hear well my wife heard and pointed it out to me, when I push the brake pedal (more when we get in the car in the morning after sitting overnight) the same kinda sound more like when brake pad's are gently popping loose I guess you could say!? Like I said its mainly only after sitting for awhile, but we did hear it the odd time just as I go to slow down and only a quick 'click' again not deadly or anything more annoying that the car is brand new and we went brand new cause we were tired of creepy older cars we'd previously driven! I'm wondering if that may be exactly why its doing it since its new and need's to be used a bit to loosen up, this is the actually the first brand new no previous drivers car I've had!
View 17 Replies
I get this loud click noise coming from the front end of my vehicle when I apply the brakes. It seems to happen much more often than not, especially at low speeds. I can only describe it as some sort of loud clicky clanky sound, it's also a single sound, it doesn't go on and on and it only happens when I apply the brakes.
View 2 Replies
2004 Camry V6 3.0L with 136k miles.
History: The original starter was replaced with an OEM Toyota starter about at 60k miles.
Current Situation: When I try to restart the engine (after just a few minutes after turning the engine off) it won't start and I get no starter solenoid click noise at all. (The battery is strong and fresh.) Multiple tries of turning the ignition switch results in no solenoid click noise and no starter engaging the flywheel or engine cranking. However, after the car sits for 15-30 minutes it can be started right up without any hint there was ever a problem.
When I touch my fingertips to the Starter Relay in the engine bay fuse box and have someone try to start the engine (when it does nothing - e.g. no start) I can feel and faintly hear the relay's contacts making/breaking (closing/opening), so I think it's safe to say the relay is good.
I think I recall that the original starter/solenoid just stopped working all-together and didn't do this intermittent act.
Starter/solenoid not work at all (not even a click noise) when the engine is hot, but it does eventually work perfectly after it cools off a bit? I've never had one act like that before, that I recall. I can only guess that maybe the starter's solenoid is failing and needs to be replaced. Yes? No?
View 7 Replies
Wife drove her truck yesterday and not one issue... Today she has no brakes. I checked the fluid and I'm going to try and bleed the brakes but would like to know what else I need to check>
I was in her truck yesterday going to church.. so I don't get it. The brakes push all the way down to the floor.. When you pump them they seem to build pressure but loose it..
View 1 Replies
I have a 98 Accord with rear disc brakes and ABS. The rotors on the rear brakes are rusted like the pads are not grabbing at all and when you push on the brakes you have to push really hard to get it to stop. I did tests for the booster to see if it is working and it seems to be. Right now I'm thinking it may be the proportioning valve.
View 4 Replies
Ok, my brakes have felt the same since I got the truck. I push a little harder than I should have to (not a hard pedal, but further to the floor than normal to where it's harder to push) get the truck to stop. If I want to brake check someone that's riding my bumper I have to REALLY smash the pedal and even then it doesn't grab hard or lock up. Since I have owned the truck I have put all new pads, rotors, and calipers on, Russel braided lines front and rear (all 3 on the rear), and flushed ALL of the old fluid from the truck (Twitch and I went through 2 large bottles when we did the brakes).
[URL]...
After all of this there has been no change in my brakes at all. Not one bit. What's odd is sometimes after it rains when I first get in the truck the first time I stop I get massive awesome brakes, but just the once. I never have a spongy pedal, and I never lose pressure, I just have brakes.
View 14 Replies
I just changed all my flex lines to stainless steel and my pads and rotors were replaced. I had some issues with calipers dragging. I used a power bleeder to bleed the brakes all the way around. Now my pedal feels really weird. If I push the pedal fast it brakes hard then it goes to the floor. If i just push it soft, it will just slowly go to the floor without braking at all.
View 3 Replies
I have a Toyota Sienna 2005 LE minivan , when I push the brakes my steering vibrates. I checked the tire balancing at the tire store just to double check no issues with balancing he verified all looked fine on tires he mentioned it is possible the front brake rotor causing it. He said I may have to replace the rotor itself since there may not be enough room for resurfacing the rotor. My question is
is it true I cannot resurface the rotors? if I have to buy new ones is it advisable if I buy it from "Autozone or OReilly " store or does it have to be the original from Toyota ? Toyota's pricing are 4 times more than from these stores. I know safety is important so let me know which option is better.
View 19 Replies
I recently had my rotors replaced and when I left the garage I noticed I had to press the brake farther than normal. A few days later, I have to press the brake pedal almost all the way to the floor. My brakes sound like there is an air leak when I push the pedal. Sometimes it stutters at the top of the push.
First question is what could it be? The second question is, could this have been caused by the rotor replacement? Seems awfully coincidental.
View 6 Replies
I have a 2003 Toyota Tundra with about 57,000 miles and noticed that it takes more "push" to get the brakes to engage. (The brake pedal has to travel further towards the floor) There is no squealing or any other sounds and the brake fluid tank is almost full, I have not added any brake fluid or had any brake work done since I bought the truck in the fall of 2008. I am wondering what the problem could be and the possible cost involved to get it fixed. Brake Pads Wearing? Air Bubble? I'm not sure. This has been ongoing for about 3 weeks, but it doesn't seem to be getting any worse.
View 6 Replies
Wife just called on her way home from work and said the brakes grind when she pushes the pedal down. 08 with 39000. What am I in for and what kind of tools do I need? I'll pull off the wheels in the morning and take a look. Everybody seems to say the newer trucks go bad in the rear first,and she never uses the e- brake.
View 10 Replies
I have a 2011CRV 2 wheel drive that is making a clunking noise in the front brakes every time I take my foot off of the pedal. I took it to the dealer twice and both times they told me that there is nothing they can do about it. They said it has to do with the way the pads wear but said that even when I change them the clunk probably won't go away. I have never heard a car do this.
View 4 Replies
Right this clicking noise is really annoying me now, every time AFTER i brake i hear this click, the faster i stop the louder the click is, also when I am in neutral and suddenly rev its clicks sometimes but rarely, I am thinking it could be a loose exhaust somewhere? Its definitely coming from under my foot area. When I brake cornering it clicks too. Checked my control arms and everything, that's not rattling at all? Need to get rid of this click sound!!
View 3 Replies
