I have a 2011 camry, and i want to install an amplifier and subwoofer box, but i cant find a grommet or anything to run a power cable through the firewall. Also, when i connect the rca to the head unit, how do i wire the cable, from behind?
View 8 RepliesI am trying to run a power wire through the firewall for an amp. I can't find a place to run it ....
View 1 RepliesTrying, to retrofit the TPMS 'clearing' button for the system that uses ABS. Easy enough to fit the button, but need to run a wire to the ABS module. Took out the glovebox/cubby hole hoping it would reveal where the main wireharness goes through the firewall, but there is a big plastic unit behind the glovebox. It would have made life easier as the ABS is right in front of the glovebox but guess I'll need to take another route.
View 2 Replieswhich number pins on the back of the euro switch are for front and rear fogs????
what is the easiest way with out drilling to run 1 small wire from the back of my euro switch thru the firewall and into my engine bay?? or if drilling is necessary where is the easiest and safest place to drill?
Just bought a used, 03 F-150 SuperCrew Lariat. Having some minor electrical issues. While cleaning truck, I discovered a red wire coming into engine area on passenger side of vehicle. Wire has a built in 40amp fuse but isn't connected to anything. What this is for/ should be connected to???
View 1 RepliesThe red wire coming from my fire wall is not connected to anything and I need to find what it is supposed to connect too it come out of my firewall near my steering column ... This is and 95 f150 with a 302 engine ...
View 1 RepliesThe right side seems plugged up with glove box components.
View 1 Replies2011 F350 with fluid leaking in through the firewall. Does the Hydro booster have to be replaced or is there a gaskets or seal on the rod that goes to the brake pedal?
View 14 RepliesMy radio in 2011 Camry (base) is not working while engine is running (the power comes on but all you can hear is static). Interestingly, it's working just fine when car is not started.
What's even more intriguing, this radio does often work properly while driving and it's happening only in the morning. However, after driving for like 30 mins and restarting the car it won't work anymore.
While my camry is running if a passenger gets out the car and if I have the smart key the car will beep three times and show the key light in the dash. If i pick the key up and move it to the button the key light goes away. Is this normal or is there an issues? I just moved up to this car from a 97 camry and could not find an answer.
View 3 RepliesI've had a used 2007 V6 Camry for about six months now.
I recently started noticing a quiet set of rapid clicks/clacks sound coming from engine compartment/firewall area more or less on driver side. I'm not sure if it was there all along or if I just began noticing it.
It occurs after starting the car, putting it in drive and as soon as I let off the brakes and begin rolling. It might only happen going forward. I will have to notice if it does it in reverse.
It happens rapidly and stops and I don't hear it again until I repeat the steps above after the car has sat a while. I don't believe it will do it again, if say, after doing it once I stop, put it into park and then back into drive and go.
I don't believe it's the CV joints. It does it once and stops and is not related to movement of the steering wheel. It almost reminds me of a relay switching something.
I'll also add that I had a 1995 Prizm and 2000 Corolla that did the same thing. Both were manual transmissions. The click they made was much louder though their cabins were not sealed as well as the Camry. The clicks would happen only after the car had sat a while as soon as the car first started rolling and then would stop. Could it be the same thing in all three cars?
What is the color wire for the running lights? Preferably inside and not at the headlight.
View 1 RepliesI wanna hook up my tow mirrors lights to the running lights, not the turn signals. Which wire it is?
View 10 RepliesOn wife's 2011 ESCAPE, we want to install another "cigarette lighter" type female power port that is live only when the key is on. (to power up the GPS without having to unplug/replug it every time.)
Any best place to tap into an easily accessible wire that is hot only while vehicle is running---maybe off the power window circuit, and what color wire am I looking for & where without too much disassembly?
Any limited number of lights the factory trailer harness on the truck can tolerate? I'm looking to add some extra running lights on my trailer, also want to put a couple of lights on each running board on the truck, they will be tied in with the trailer harness since it is not monitored by the BCM. I did a search on this a few different ways and couldn't find anything.
View 8 Replies2011 golf 2.5l. It all started a year ago, I changed a bulb.from there the head light error came on. I switched out the head light switches on both. Driver Side works all the time and both have been.now getting same problem it in passages side. Have to press the wire for the head light to even turn on sometimes ...... Not under warranty sense I replaced the bulbs my self..... I asked if I can get new wiring. But got a laugh and got a reply that I have to replace the whole head lights it self as a unit. So if I do have to go that route . Not hide stock head lights.
View 5 RepliesI would like to hook up some auxiliary reverse lights, I want to use a relay. And activate the relay when I put my truck in reverse. I would like the relay to be in my custom relay/fuse box under my hood near my battery. I'm looking for a wire I can tap into, to use to active the relay as close to the battery as possible. Or at least a wire on the outside of the cab near the engine compartment. Maybe there's one coming from the tranny? I have a 2011 f250 super duty. XL, I think, its a very base model truck no power windows or locks, only fm/am radio, no NAV system, no remote unlock, no nothing, 2 wheel drive.
View 9 Replieswhere the reverse wire at in the front of a 2012 camry se .
i got my otocam3 from adc mobile and will be adding a backup camera to but need to connect the (+) reverse wire from the radio.
While I was checking my PCV valve I found a wire that one side is connected close to the radiator cap. What is this wire for and where should be the other side connected?
View 7 RepliesI have a 2004 camry LE with a stock factory head unit. I recently bought 2 10" Kicker CVR subs with 300w rms each and a 1000w rms class D hifonics amp. I also have a wiring kit and was wondering on how to wire the RCA and the remote wires to my headunit. The ground wire and the power cable are already installed and those were easy. The only thing i do not know how to do is install the RCA cable and remote wire to the headunit. I know it requires an in line converter and i have one,.
View 7 RepliesMy 93 camry v6 has spark jumping all over the place from the coil wire.I bought some new plug wires but only used the coil so far to see a minor improvement.I'll wait till it's dark to see where and if there is any more leakage.Plug wires are only 5mm thick.Is there something better than this(duralast) out there?
View 2 Replies