I'm very eager tall footwell led lights connected to dome, looking for step by step methods since I am not familiar with wiring. What supplies are needed to perform this job and how to install.
Btw have Camry SE 2010 no sunroof. Interested installing both front and back footwell.
I just took delivery of a new 2011 golf and noticed the footwell lights were absent, presumably because Canadians always seem to get shafted. I would like to hear from other Canadian golf owners before going to the dealer.
If absent footwell lights are indeed standard for Canadian golfs, I'm thinking about installing them myself. I found a link on another site that details the install on an MKV : [URL]...
I'm trying to install my leds on the dome lights. The back one was quick and everything but the front dome light cover doesn't want to come off. Only the passenger side one wants to pop out. While the driver side of the dome doesnt wanna budge. It seems like ts actually stuck to the inside of the compartment. It just doesn't wanna pop off all that i getting is scratches.
View 5 RepliesSo I've noticed lately that atleast one of the passenger side footwell ducts is blowing cold air when the car is warmed up and everything else is blowing warm air. It seems to be the ducts closest to the driver side, although I'm not 100% sure. 2010 GTI MK6 ....
View 2 RepliesIm trying to put in footwell lighting ran all the wires and all but trying to make a connection cant seem to find a fuse box under the instrumental panel...! Where can i connect under panel..! Looking for pics....
View 9 RepliesDoes the 2013 RX350 footwell lights not illuminate when driving as they did on previous models? I also do not see a light on the interior door handles.
View 7 RepliesRecently a couple issues have started with my car, and I'm wondering if they are known.
1) The footwell lights will sporadically switch to full bright for a few seconds. This is really annoying, especially when driving at night.
2) The wiper speed will occasionally slow down, and I'll have to turn them off and on again to fix them. (note, I mean the actually speed of the swipe, not the delay. on the normal speed, not fast, not intermittent, the wipers will physically slow down).
Both are annoying, and I'm hoping they aren't indicative of a larger problem.
Is it easy, I see that LE Camrys are pre-wired for fogs.
View 14 RepliesI am looking to install HID lights into my headlight. Successfully i have installed the regular hid into the headlamp for regular use lights. Now i have a question on the high beam which is together with the Drl. Do i have to get a bixenon kit for this socket to get the drl running and the high beam when selected? Or can i just install a regular lo/hi hid. And will it send low output for the drl and then when selected for the high beam it will function as it should?
View 14 RepliesI got a new frame engine air filter as recommended by the book, tried to install and the cover will not close properly.
View 2 RepliesI have 2006 Toyota Camry with the factory stock radio. I want to play mp3. I don't want to install any devices. what's the cheapest way to play mp3? I don't care about the sound quality.
View 4 RepliesI don't like how they aren't in the middle of the slots of the front bumper. Where the chrome strips are. I wish they were in the middle of that, instead of towards the outside.
In this video the technician shows that there are holes that you need to drill. This allows you to fasten the DRLs to the bumper.. can I drill the holes in the middle? Would it look stupid up close?
[URL] .....
Installing plastidipped their 17" stock rims? Looking for pics and just brief info about it? Like how many cans? I have a CGM Camry SE and just wanted to change my rims up a bit.
View 1 RepliesIn the process of selling my car and had my guy take my speakers out for the stock JBL ones but noticed after that my clock on the dash and dome lights aren't on at all. Is there a simple plug that cold have been missed?
View 1 RepliesHow to take it off so I can install LED white lights to make it bright. I already got the rear or middle light whatever you call it. I am afraid to put force on it to break any tab or the light cover it self so that is why I am asking.
View 6 RepliesFor the second time in two years I have come out and found my dome light on.
View 4 RepliesI have a 2006 Solara convertable. I would like to install a new deck with PS/Nav/ Bluetooth. First will a deck fro a Carmy fit in a Solara? If so what years are compatable?
View 1 RepliesI installed my i-throttle but I might have done some steps wrong don't remember exactly but now my check engine light is on.I throttle works fine. Is there a way to fix this and make the check engine go.
View 2 RepliesI installed a new cabin air filter and I am getting some fan vibration noise. Gets really noticeable around speed 3 or 4. What could be causing it? It is the TY brand filter.
View 4 RepliesFew weeks ago, I got the Tein spring installed on my camry. Drop 1.5/1.6 front/rear.
Problem is now I sometimes hear this clunking sound from the rear. It doesn't happen very frequently, just every once in a while when i drive through a small&sudden bump.
Only from the rear, nothing from front of the car.
Another thing is that when i reverse & turn (ex. getting out of garage), it makes one or two cracking noise from the front, small clunking sound from the rear.
I'm suspecting the strut may be bad. The mechanic guy said that my rear struts are bad (when he was installing the springs).
Am I in need to get new struts ?
I have a 2013 Camry XLE V6, and it now has almost 17,400 miles on it. About a month ago, I replaced the Cabin Air Filter (was definitely dirty) and the Engine Air Filter (was somewhat dirty). I made triply sure that I installed the Cabin Air Filter the correct way (the Air Filter is easier, as there is only one way to put it on).
In any event, after the car sits a while, and I start it up, whether I let air circulate from the outside or not, when I press the fan button for the A/C, initially a "musky" smell is present, but it does go away fairly quickly. (I have not tried this in "heat" (non A/C) mode yet). Why this happens? Seems somewhat strange (by the way, I used the correct STP filters that I previously purchased at AutoZone).