Camry :: 2010 - Changing High Beams And Adding Fog Lights?
Jan 27, 2013
I recently noticed that the high beams on my car are actually pretty dim (38k miles with them.) I've looked online and it seems fairly easy to change out the bulb but I wanted to know if there any specific bulb brand recommended and also I wanted to know how to add fog lights since I live in a part of the country where it snow alot and its foggy in the summer.
View 14 Replies
Advertisement
2008 Camry Hybrid. Normal lights are dim. Auto on position results in no lights. A turn brings the lights on, but appears to be a "parking" position. High beams OK
The dealership has no clue - they wanted to sell new bulbs. They are barely bright enough to drive at night, certainly not 10% dimmer from age as they described.. (plus the auto on does not work ).
View 1 Replies
I've ran into an issue with my high beams on my 07 Camry SE. All lights are working except high beams. When you switch to high beams the lows only stay on. The dash light comes on and shows high beam indicator, but no brights! Fuses look good, and so do both bulbs. Going to go buy a bulb later today just to try. Like I noted they both just suddenly stopped. I'm leaning towards dimmer switch on column now.
View 11 Replies
Yesterday, I went through my car doing a complete LED conversion. I got everything done. And then I replaced my high beams with Silverstar Ultras. I didn't touch my fog lights or my low beams (these will come next.) And then I went and got some wings with the boys, showing off my new LEDs and my bright high beams. We noticed that my fog lights turn off when my high beams were activated. A cool point I never knew about, but, it is extremely relevant in this story.
This morning I went to work, and noticed that my fog lights were not working. So after work, I came home and tried everything to get them working, check fuse in car, and tried every combination of light to activate them. Then I checked the fuse box under the hood, I hadn't actually ever looked in there before. When I did, I noted that the 10amp fuse, Fog R/R was missing... MISSING. I took the spare from the cover and put it in, and bam, fog lights work again.
View 2 Replies
I know this mod can be done on other models of Toyota, but for 6th gen Camry? And no, I won't leave the high-beams on when oncoming traffic approaches.
View 1 Replies
So it looks like I need 9011 HIRs for my 9005 high beams, but which HIR do I use for the 11F low beams? same?
View 14 Replies
I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.
I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?
View 2 Replies
Didn't find anything on this, but I've noticed that on my GTI the Fog Lights stay on when the High Beams are turned on. Which I find unusual since no other car I've ever owned did this (Including my '12 TDI), and as far as I understood, in the US (At least here in NY), it was actually illegal to have them both on at the same time. ?
View 12 Replies
Like on most Chevrolet's or other cars, when you unlock your car with the remote, your headlights come on for awhile. I've tried to 'unlock' this feature with a scanner but the only option I was able to change was the auto lock door function. Is there any way to activate this feature (if possible)? If its not possible with a scanner. I have a '09 Santa Fe Limited, w/ Auto Lights w/o DRL.
View 10 Replies
Any mod that will allow the fog lights to remain on when the high beams get turned on?
View 40 Replies
What steps are needed to modify a 2005 RX 330's fog lights to stay on with the high beams? I found the info on the web & did this modification to my 2010 Tundra but can not find any info pertaining to how to mod an RX.
View 2 Replies
Any way to run fogs and high beams same time?
View 9 Replies
I have a 2016. I'm waiting on some aftermarket headlights and they will look great with LED drl/high beam. Have you installed them in this location ? I'm worried about fitment with the led being too big to fit in there.
View 23 Replies
I love this car- i just bought it , but it has one problem i cant figure out .The high beams didn't work at all -till my mechanic figured the prior owner took out the two fuses - now they stay on all the time - even when the car is turned off . My guess is the light switch - my mechanic said it is probably more than that...
View 3 Replies
Vehicle: 1983 chevy c10
Here's the problem, when the high beams are on the dash cluster lights work fine,but when I turn the high beams off the dash cluster lights go off.Im going to buy a new high beam switch but what else might cause this problem?The truck has one of those metal button high beam switches that is mounted on the floor.
View 19 Replies
Ok today I was driving my 2004 Gli n noticed when I flash my high beams (pull them back for temporary lights) my interior lights come on. When I release the high beams the lights go back off. I know this isn't normal n wanna fix it.
View 8 Replies
For my 2013 with HID lights, I'm adding a light bar, and trying to find a good wire to tap into so I can wire in a relay to turn the light bar on with my high beams. As it's going to a relay, I originally thought to use a fuse tap, but the high beam fuse is always powered. Any other wire I can use in the cab?
I'm also looking for an in cab wire for the reverse lights I'm adding. I've been trying to make sense of the wiring diagrams online, but I am not having any success.
View 2 Replies
A good while back I seen a thread to do this , but can't locate it now. I have a 2012 F250 and looking to make my night time driving better ....... I want to run both low and high beams at the same time and getting the fog lamps to stay on when going from low to high beam.
View 14 Replies
I have a '99 Explorer XLT and when I turn the high beams on, the fog/driving lights shut off. Is this normal? Is there a way I can keep the fogs on while the highs are on?
View 1 Replies
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 Replies
I have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?
In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.
View 5 Replies