Camry :: 2009 - Rough Idle / Dash Shaking
Mar 26, 2012
I have been searching and it seems I am not the only one who has a rough idle with the I4. It is very rough even without the A/C on. I can see the dash shaking, I can feel it in the steering wheel, brake pedal, seat, and arm rest.
The dealership cleaned my throttle body and MAP sensor (They forgot to put one of the screws back in the MAP). This is the third time they have cleaned them. When they returned it to me I told them to keep it until it is fixed. So they took it back in and decided that it might be the motor mounts so they went ahead and replaced them aside from the dogbone or whatever it's called.
When they returned the vehicle it was still having the same issue, they told me that its just the nature of the beast and to live with it. Well my neighbor has the exact same car, and yes it does have a SLIGHT vibration in gear but nothing like mine. I can't stand this car I really wish I would have bought something else.
I currently have 70,000 miles and for the last three oil changes I have been running Full Synthetic in hopes it would work but it has made no difference.
Just a note I have had multiple problems with this particular dealer lying to me. They even ripped up my passenger seat and would not fix it they said it was pre existing. I am over the seat I don't care anymore but I am tired of the rough idle. I plan on taking into another dealer but I am hesitant because they told me if there is no real problem I will have to pay in full for the diagnostic.
View 14 Replies
Advertisement
Here are my issues.
1. In drive under load during braking especially when the AC is on the car shakes. I can put it in to neutral and it works but when in drive or reverse especially with AC the car shakes. (not just a little bit)
2. The RPMs are settling around 400-500 so the stuttering makes since.
3. Feels like everything effects my Idle RPM speed (breaks, steering, AC, power windows lol!)
I am thinking possible fixes from research
1. ECU Reset with everything on AC/Lights/ Im planning on mashing on the breaks 2 see if the extra power usage work.
2. Throttle Body cleaning
3. Alternator could be bad
View 1 Replies
I get a really low idle, almost to the point of the car stalling, when the A/C is on. Usually it's only when I first start her up but sometimes I notice it at stop lights after driving for a while. The idle goes back to normal when I shut the A/C off every time.
View 1 Replies
I just bought a 2009 Camry LE (4 cylinder) about a week ago. It's only got 10K miles on it. Ever since I got the car, I've noticed a very slight vibration when stopped and in gear. It does this when the engine is cold and warm. It only does this when I am in gear with my foot on the brake and stopped. I still have warranty, should I bring it in to the dealer? Is there a simple fix for this? Or is this normal?
View 14 Replies
I was doing a tune up of my 09 camry with an 2.4L engine due to a rough idle problem i have been having , and I noticed a lot of orange colored dust in one of the 4 spark plug tubes, I mean a lot of it while the other 3 were dust free. I tried my best to clean it out and inspected the spark plugs all seems to be fine. What could be the cause of the dust?
View 9 Replies
2000' GMC safari's electrical system. To begin, she has 95,000mi, an although that's about a year old, a duralast gold battery about the same age, and 13.8 volts at idle on the meter at the battery. The problem, over the past couple of weeks, I'll start it and drive off as normal, an the thing wants to stall for about two seconds. After that, no problem whatsoever. One time, it actually did stall on me, and everything went dead for a couple of minutes, no juice whatsoever; noticed that even the clock in the radio read 12:00. After a few minutes, I tried to turn the key again, and it started right up. This a.m., I went to start the van, and it initially would not turn over. The started motor turned but in a weak manor. At that point we went completely dead again, no electricity whatsoever.
The strangest thing is what happened next, I pulled the hood latch release as I was about to investigate and noticed the guages on the dash move when I did, power was back. The van then started but barely, and when it did it stumbled for a few seconds before driving off without so much as a hiccup the rest of the day. The only other possibly related symptom would be a slight rough idle combined with a just noticeable dimming of the dash lights in the dark at idle. Also, I should mention that I have checked the battery terminals and they are tight and clean, the van is in excellent shape mechanically, averaging 20mpg combined, smooth acceleration, no leaks, "using oil", white or black smoke, etc. Plugs, cap, rotor, and pcv are recent. Egr and maf are both clear.
View 4 Replies
I have problem with my 2006 Prius , idle shaking and when the engine stops its really rough.
View 2 Replies
I bought my 2012 Accent a few months ago. I have been noticing that when its cold it has a bit of a rough idle. Nothing bad, no reving, but just a general mild shaking. No check engine light either. It happens in park, reverse, neutral, and drive. It stops and runs smooth after a few mins of driving. Since I bought it I have been using Top Tier gas and a bottle of gumout at oil change. Could it be just the way the engine is, since it is a small 4cyl? Like I said its not bad or affecting the way it drives, just seems strange to me.
View 6 Replies
My exhaust system was replaced on my 2005 Corolla in August. After driving it for just a few days, there was a shaking when the car idled. The mechanic replaced two engine mounts and the idle was much worse! He said it was ok to drive, so I started on my planned trip across the country. In Denver I took it to a mechanic at the Toyota dealer and they adjusted the throttle. It was better for a while, maybe a week and 1,000 miles. Now it is worse than ever! Having gotten two totally different causes from mechanics, I am not sure what to do next.
Also just before the exhaust sytem went, I had the 60,000 mile service done and had the car totally checked out by both Toyota, and an independent mechanic who specilizes in Japanese cars. After a car wash in California, the maintence required light came on.
What is going on?
View 8 Replies
A couple of days ago (Friday, Sept 14th), I noticed my 98 V8 5.0 liter Mountaineer was idling rough. I had the codes pulled and got P1401, P0455 and P0308. I did find a vacuum leak and fixed it (changed the air filter and cleaned the MAF while I was in there). I also replaced all the plugs (based on the P0308 misfire). I cleared the codes after that with a neg battery pull.
I'm still running slightly rough at idle, but not as bad. However, I have found that when I get up to about 45MPH (1500 RPMs) I started to get a worrisome shaking/ vibration. It's difficult to tell where it is coming from. If I let off the gas, or give it more and go up to about 50 mph, the shaking stops. It is only when I'm pressing the pedal in this range (like it is having trouble switching gears, perhaps?). Over the past two days of driving it and testing, I have been to autozone and had the codes checked. Nothing comes up, and no CEL.
I just had a new trans put on about 6 months ago. The only thing that preceded this issue was I got an oil change the day before this started at a place I don't normally go to (unlikely, but since they didn't write the type of oil they used on my window tag, I figured I'd mention it). I've read some suggest it to be a tire issue; but that strokes me as odd, since the shaking only happens when applying gas.
View 14 Replies
I have Subaru B9 Tribeca 2006. Week ago started the following problems - after starting up, engine is shaking (rough idle) for a few (20-30) seconds and then it's OK. Then I got Check Engine, Cruise and ABS lights on. Diagnose shows mistake in 1st cylinder. changed spark plug, air filter, checked all connections, cleaned injector and throttle. Lights went out and engine was working as new. but the second day car had rough idle again....
View 1 Replies
I have a great vw 2008 rabbit with 115,00 miles on her. I just completed a round trip. On my way back during terrible stop and go Washington DC traffic..I noticed the car started to rev a bit. After that the idle has been rough with some light shaking. No engine light, but it does sound almost like it is choking a bit. Not extreme..but definitely not the smooth engine sound I had. I am guilty of NEVER HAVING MAINTENANCE on her..so I had new spark plugs put in and a new air filter. The problem is less..but the idle is still on the rough side.
View 8 Replies
It's a 2004 V8 Touareg with 100k miles.
Getting horrible misfires and they're jumping around to different cylinders + other intermittent codes. The symptoms are ROUGH idle, and hesitating/shaking under acceleration.
The MIL has never come on in this car. But, it illuminates when you turn the key forward. (Almost like previous owner coded the light out?)
Replaced all 8 spark plugs, just ordered 8 new ignition coils. Hoping the misfires are the coil packs but obviously theres some other stuff going on here.
Pulled codes 2 weeks ago:
1) random/multiple misfire (P0300)
2) misfire cylinder 4 (P0304)
3) misfire cylinder 8 (P0308 )
4) warm up catalyst efficiency below threshold bank 2 (P0431)
5) secondary air injection system insufficient flow bank 1 (P0491)
6) secondary air injection system insufficient flow bank 2 (P0492)
7) 02 Sensor Circuit Slow Response Bank 2 Sensor 1 (P0153)
Pulled codes 1 week ago:
1) random/multiple misfire (P0300)
2) misfire cylinder 2 (P0302)
3) misfire cylinder 3 (P0303)
4) 02 Sensor Circuit Slow Response Bank 2 Sensor 1 (P0153)
Pulled codes tonight:
1) random/multiple misfire (P0300)
2) misfire cylinder 2 (P0302)
3) misfire cylinder 3 (P0303)
4) misfire cylinder 4 (P0304)
Cleared codes. Swapped ignition coils from 2 & 3 with 7 & 8. Drove around the block, then re-ran them:
1) random/multiple misfire (P0300)
2) misfire cylinder 4 (P0304)
3) misfire cylinder 5 (P0305)
4) misfire cylinder 6 (P0206)
5) misfire cylinder 7 (P0307)
6) misfire cylinder 8 (P0308 )
View 1 Replies
I have a 2008 Ford Focus - 4 Door Sedan SE 60300 miles.
I've gone to 3 mechanics now and no one can seem to figure out whats wrong with my car. Here's whats happening:
About 1 1/2 years ago I took my car to get an oil change at Jiffy Lube (Yeah never again). When I left, my car was idling funny... Silly me didn't take it right back and have them tell me what was wrong.. so I let it go, well about a month later it started idling even weirder. Basically it feels like my car is shaking when it gets under 1000 RPM and I notice my RPM dial start falling and bouncing back, acting like its going to stall, but never does. I notice a loss of power when this is happening (on speed up and just accelerating in general). All of this is random, I can't seem to put a pattern to it as to when it happens. One day I'll start it up and everything is perfect... Then I'll shut it off and restart it later, and it starts vibrating and puttering again... No signals as to if its hot/cold or wet/dry, no environmental variables seem to cause it to happen anymore than others. And there is no check engine light on, everything "looks" normal.
What I've had done to it so far is:
Air filter changed / reseated
3 oil changes (keep getting told it will work)
Throttle cleaned
Computer reset for idle sensor data rebuilding
Now I'm told that I need new engine mounts, and that could be the reason for the vibration. I'm thinking that the vibration caused the mounts to wear out, more so than the mounts being the cause. Mainly because I don't see how bad mounts could cause loss in power/bad idling.
What could be wrong?!? Really bugging me and don't want to keep throwing money at it for phantom solutions. Seems like mechanics I go to can't figure it out unless there is a check engine light on with some diagnosis code to tell them exactly whats wrong.
View 8 Replies
My 99 Explorer XLT V6 SOHC has been misfiring lately. In idle the RPM needle fluctuates a bit and the vehicle vibrates and shakes. At night when the lights are on I notice them dim a bit as the engine struggles in idle. It doesn't stall very often at all. Accelerating I notice way less power and the engine studders. That's when the engine light comes on flashing. Then remains on solid afterward. I brought it to a mechanic friend who read the code and it was cylinder two misfire as well as the O2 censor.
I replaced the plugs and leads and censor. Noticed the plug in cylinder two had little to no gaping. Thought I had fixed the problem. The vehicle ran perfectly. Three or four days later driving on the hwy same problem came back. Thinking it must be the coil pack I got one for a good price and replaced it. Again, the truck ran great for four days and now the problem has returned. Same thing, shaking studdering and flashing engine light. I have verified the locations of the wires and plugs a few times so i believe they are all properly installed.
View 1 Replies
I'm having a problem with my 6.0 back in September I started to notice a little miss with some black and white smock while accelerating so I took the truck to a power stroke specialist near my house to have it diagnosed they said my number 5 injector was starting to go bad so just this last week I finally got up enough money to get the injector changed I got the truck back yesterday from the mechanic. While driving I get a lot of shaking right around 1500 to 2000 rpms when I let off the accelerator it smooths out if I mash on it and keep the RPMs above 2000 it smooths out the truck still has a lot of power no check engine light has ever been on through this whole ordeal and there's a rough idle I guess the best way to describe the shacking would be if the truck was a standard shift and you were pulling a hill in to hi of a gear.
View 6 Replies
My 99 Explorer XLT V6 SOHC has been misfiring lately. In idle the RPM needle fluctuates a bit and the vehicle vibrates and shakes. At night when the lights are on I notice them dim a bit as the engine struggles in idle. It doesnt stall very often at all. Accelerating I notice way less power and the engine studders. Thats when the engine light comes on flashing. Then remains on solid afterwards.
I brought it to a mechanic friend who read the code and it was cylinder two misfire as well as O2 censor. I replaced the plugs and leads and censor. Noticed the plug in cylinder two had little to no gapping. Thought I had fixed the problem. Vehicle ran perfect. Three or four days later driving on the hwy same problem came back. Thinking it must be the coil pack I got one for a good price and replaced it.
Again, the truck ran great for four days and now the problem has returned. Same thing, shaking studdering and flashing engine light. I have verified the locations of the wires and plugs a few times so i believe they are all properly installed.
View 7 Replies
I got a p0284 code and have some symptoms such as shaking while accelerating between 45 and 60 mph and a rough idle.
View 2 Replies
My car was shaking badly during idle and the Engine and VSC Off lights came on simultaneously. I took it to a local garage (not dealership) and they said that there is anti-freeze leaking into a cylinder. They said the only way to clean it out/fix it is to first remove the entire engine from the car so it could be worked on. It will cost a total of $2,700. My engine has 141,000 miles on it so they said this may be risky since it is so used. They said for $3,500 they could swap it with an engine that only has 31,000 miles on it (and a 6 month guarantee.) By numbers this sounds like a no brainer (I am assuming?) but I am curious if swapping the engines would be worth it seeing as the rest of the car has still traveled 141,000 miles. I have kept it in good condition and such though. I am also curious if the engine really does need to be removed to fix this sort of problem or it it could be done cheaper.
View 4 Replies
2001 f250 7.3L, 289,000 miles, changed the IPR and ICP, noticed the EBP tube was in two pieces. Would this cause the rough idle and shaking? IT started running rough and would die after a mile or two. Would have to wait 30 minutes before it would start again. That is when a buddy told me to change the IPR and ICP the ICP plug was covered in oil as well as the top of the ICP. So I changed the wiring plug as well. I originally cleaned and changed O-rings on IPR but then it wouldn't start, bought a new IPR and started but runs rough. I just started it with EBP tube removed and sensor unplugged. Idling rough when I press accelerator and RPM go above 2K it levels off pouring black smoke everywhere.
View 3 Replies
I disconnected the battery yesterday and once I connected it back the car felt like it was gonna turn off and ever since when I'm in a stop it starts shaking. Is their anyway to fix the idle time ....
View 7 Replies
