Camry :: 2009 LE - Clunking When Hit Bumps
Jun 28, 2013
Alright I've got an 09 camry le on 18's, I recently just put the tein s tech springs on and since day one it clunks when I hit bumps. I did the install myself (not bad, just time consuming), so no taking it back to someone. I've taken the wheels off and made sure the bolts are all tight and the top mount too. Everything is snug. Still clunks. Is this just something that is normal with aftermarket springs on stock suspension?
View 14 Replies
Advertisement
Have a 2011 SE with just over 21k miles on it.
Problem #1: When ever I go over bumps, go down my drive way, I hear this rather loud noise coming from either the roof or right rear. It sounds like someone is hitting metal with a hammer.
It happens when I'm turning the wheel or just driving straight.
Problem #2: Also when I am going over a speed bump, when the rear of the car goes over it, the suspension gets squeaky. Speeds are about 2-3 mph~
Unfortunately, it is no longer under factory warranty so taking it to the dealer is my last option.
View 5 Replies
So I was driving home from work today and picked my daughter up from the sitters. When I got back in the car I noticed a "clunking" noise when I would hit small bumps. Trying to figure it out, I also noticed this occur when driving straight and moving the steering wheel back and forth.
The car is a 2012 SE v6 with about 26k on it.
I did install eibach springs about a month ago, but have not had any issues until now. I took both front wheels off and checked anything I would have changed when installing the slings and everything seems okay.
View 5 Replies
My 09 camry 6 cyl with 126k miles had front end struts replaced with aftermarket ones. Now I have front end noise, banging, when I go over bumps?. Struts, mounts, springs all replaced. What can be the cause of the noise?
View 10 Replies
I got a 2009 SE a few weeks ago. It's got about 103k miles on it.
I've noticed that when going around a curve and hitting bumps that the car wants to move around a lot, feels real loose.
View 14 Replies
2009 Camry SE V6
103,000 miles
New Monroe OESpectrum struts installed by Sears Auto in July, with new alignment. Original springs were not replaced.
Soon after I heard a clunk. Sears tightened a strut mount a week later. Clunk went away.
New Kumho Ecstas installed and balanced a week later.
Still hearing clunk sounds from front end, take it back to Sears to inspect the struts and suspension. They tell me struts must be removed and inspected. They ended up not removing the struts but they replaced the sway bar end links and bushings, which they said were in bad shape. Steering is a bit tighter now.
Im still hearing clunk sounds from front end. Now theyre louder. I get a clunk every time I brake in traffic or a parking lot. I also get a clunk when the car goes over a bumpy road without brakes applied. So doesnt appear related to brakes, calipers, and whatnot.
I can feel the clunk in the steering wheel. Sounds like two loose parts rubbing against each other which shouldn't be rubbing against each other.
View 5 Replies
I have a 2009 Toyota Camry. I started hearing this knocking noise(really loud pop) from the rear. I have read the TSB's about a knocking noise coming from the "Spring Bumper" from the strut assembly and they are all facing the correct way. And there was also a TSB for a knocking noise from the "Roof Structure." The dampening bonds come apart and makes a knocking noise. I've replaced a strut mount in the right rear and that did not fix the problem.
View 4 Replies
So my 09' Camry now has 130K KMs on it and for the last few months I've had an issue where when I turn the steering wheel (at rest and while moving) there is a clunking sound and feel in the steering wheel at various spots in the steering wheel rotation.
I'm worried the u-joints (if it uses them) in the steering column are worn out and might need replacing/lubricating but I'm not sure how to address the issue without an expensive Out of warranty visit to the dealer.
View 14 Replies
I changed the front brake rotors & pads on my wife's 2009 Toyota Camry & everything seems fine except when doing sudden or slightly hard stops it seems to do a clunk/knock type sound from the front brakes. It also only does it sometimes not every hard/sudden stop.
One thing that comes to mind is that when I went to tighten one of the guide pin bolts it was a real pain, the big bolt that the screw threads into kept spinning making it hard to tighten the bolt into & none of the others did this. I thought I tightened it down but possibly not?
View 5 Replies
I am losing my mind over this. I bought a 2013 c63 in May and the last few months it has been making this clunking noise. I have taken it to the dealership 3 times so far and each time the noise goes away for about a week only to return worse than it was. It used to only make noises when I turned right on incline changes at low speeds. Now it makes the noise going over any bump at any speed.
The first time I took it in they replaced the front left strut. The second time they replaced the front right strut. The third time they replaced the lower control arm.
I am posting 2 videos of the noise. This video is between the first and second visits and the noise can be heard around the 24 second mark.
[URL] ....
This second video was taken today, 2 weeks after my third visit. You can hear the noise continuously throughout the video on any slight bump.
[URL] ....
View 11 Replies
I did F&R brakes (Adam's rotors and hawk & akebono ceramic pads) on my B6 4mo about a month ago. Ever since changing the brakes, there is a clunking noise, when going over bumps, coming from the right side, possible right front. The sound consistently goes away when I press on the brakes. It's a metal on metal clunk that you can feel and hear. Not terribly loud, but pretty annoying. What could be the cause?
View 2 Replies
Aside from the clutch and gear changing noise, recently I've been noticing something that sounds almost like a rattle when going over bumps, say a series of filled potholes on a highway where they just slightly bump to move your wheel around, it's not that deep thumping you would expect to hear but it sounds like something is loose in terms of the suspension.
Happens on the front and seems like its coming from both sides. To me it sort of sounds like they forgot to tighten something up when they removed the shipping "blocks"/spacers, but I am not exactly sure what to check. I really do not want to visit the dealership at only 600 miles on the clock ...
View 5 Replies
Got a 97 Sedan with 207k+ on it. Just did all struts (monroe quick-strut), brake pads, shoes, drums, rotors, calipers, rear and front sway bar endlinks, and lower ball joints. All hardware is tight and secured.
I am getting a clunk when I go over some bumps, but not all of them. I also find that it will clunk when I try to accelerate while turning out onto, say, a main road or something where I need to pick up speed. At times it sounds like it's coming from the passenger and others it sound like the middle or driver side.
Control arm bushings don't look too bad and would probably cause more noise when accelerating and braking. Both wheels are snug and don't move when tugging on them in the air. There is no play in the steering as well.
View 14 Replies
I have a clunking noise from the right front suspension when going over bumps. I've replaced the Strut bushings that were collapsed, the control arm bushings that had play and the noise is still there. There is no play in the links. There is a slight noise in the sway bar bushings when struck with a rubber mallet. I hate to keep replacing parts chasing down this noise.
View 9 Replies
I got a few questions. First one is how hard would it be to swap the auto trans out for a manual and what would I need. Secondly, have some weird boost issue, boost gauge use to read 5 psi with front mount now its at 2 psi and their are no leaks in the IC system.. can't figure out what it is (turbo only has 3k miles on it) final question what causes a clunking noise every time i go over bumps and curbs?
View 4 Replies
What is causing this noise. When the rear of my truck goes over bumps it makes a rattle/clunking noise but I can't find where it is coming from. Here is a video of the noise. [URL] .....
chevrolet - silverado 1500
View 11 Replies
I've just installed new shocks on my 1997 Suburban K1500 4WD. Now there's a knock that appears to come from the driver's side. The knock seems to be as the wheels descend while crossing rolling bumps rather than abrupt jolts; for example; pot holes or running over reflectors embedded in the road don't cause the knocking.
Here's what I've checked: balljoints, inner and outer tie rods, idler arms are OK; brake calipers secure; 4WD is fine; steering shaft is OK (don't feel the knock in steering wheel); can't find anything loose.
View 10 Replies
Clunk in the front end when going over speed bumps? That is the only time I ever get it, never on bumpy roads or anything like that just at speed bumps. It seems to be louder on the drivers side but I am pretty sure its on both sides. I never noticed it until a couple speed bumps were installed along my normal route, but that could be because maybe I never drove over them previously?
View 3 Replies
There is a clunking noise coming from the rear of the car. Not a metal on metal sound. Sounds like its more on the passengers side. I replaced the swaybar linkage ends since they were a little loose and thought it was that. Nope...I have H&R coilovers, they are about 5 years old. Can't imagine they be shot this soon. Had someone drive my car while i was behind the R and the rear wheels aren't dancing at all, a common sign of a blown shock. Push down on the car, shocks still respond like they did from day one. I've put the car up on a lift, both sitting and wheels dangling. With the wheels dangling, I grabbed onto the shocks to see if there was any play in the upper shock mounts, solid. Looked under the whole car for loose plastic covers. Can not see anything loose. I made sure everything inside the hatch, including the battery is sitting snug.
The clunk happens over bumps, with or without the brakes on and is loud enough that if the radio is on, it can still be heard.
View 3 Replies
I am experiencing a bad clunking noise when going over bumps. Its comming from the passenger rear and I am assuming the springs collapsed. How can i tell for sure? The car is sitting a little lower on the corner. Is it bad to drive the car with the spring in this condition?
View 8 Replies
So about a month ago my 2013 Sonata GLS started to make some clunking noise going over the littlest bumps over the road from the front end on both right and left side.
I brought it to one mechanic and they said the rack and pinion needs replacing which is an expensive fix. I couldn't believe that was the problem as I had no leaks and it was on their solid. I ended up taking it to my uncles mechanic and he stated its the stabilizer links on the front right and front left wheels. My way to work has a lot of bad pot holes... so I'm hoping that the stabilizers are actually the problem.
Anyways, tomorrow I will be bringing it to the mechanic to have them both changed. I know a lot have been complaining about this issue and instead of replacing the rack and pinion, I thought I'd try and see if it actually is the stabilizer links and provide a fix for some of the sonata owners on here.
View 28 Replies
